1. Tools
  2. A-iPower
  3. Shop Tools
  4. Trash Water Pump
A-iPower Trash Pump - 255 Gallons Per Minute - 3" Inlet and Outlet Ports

A-iPower Trash Pump - 255 Gallons Per Minute - 3" Inlet and Outlet Ports

Item # 289-AWP80
lowest price pledge
Our Price: $397.48
You Save: $10.52
This item qualifies for Free Shipping
Shipping Weight: 82 lbs
289-AWP80 - Trash Water Pump A-iPower Shop Tools
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Drain dirty water from basements, pools, and flooded areas with this gasoline-powered trash water pump. Handles hard and soft solids like sludge, leaves, and twigs. Self-priming pump with 3" diameter suction and discharge ports moves 255 GPM. Lowest Prices for the best tools from A-iPower. A-iPower Trash Pump - 255 Gallons Per Minute - 3" Inlet and Outlet Ports part number 289-AWP80 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Q & A (1)
  • Videos (1)
  • Photos
  • Why etrailer?

A-iPower Tools - 289-AWP80

  • Shop Tools
  • Trash Water Pump
  • A-iPower

Drain dirty water from basements, pools, and flooded areas with this gasoline-powered trash water pump. Handles hard and soft solids like sludge, leaves, and twigs. Self-priming pump with 3" diameter suction and discharge ports moves 255 GPM.


  • Trash water pump lets you drain dirty water from basements, pools, trenches, and other flooded areas
    • Designed to handle solids like mud, sand, twigs, leaves, and sludge
  • 3" Diameter NPT suction and discharge ports can pump up to 255 gallons per minute
    • Included inlet and discharge hoses easily connect to ports
    • Attachable inlet strainer prevents large solids from entering pump
  • Maximum head lift allows the drainage point to be 85-5/16' above the water level
    • Vertical suction head lift lets the pump sit 23' above the water level
  • Ergonomically designed recoil pull handle provides easy manual startup
  • Air-cooled, 4-stroke engine uses standard unleaded gas - no need to mix gas and oil
    • Cast iron cylinder sleeve helps ensure long engine life
  • Self-priming pump provides quick, hassle-free operation
    • Cast iron volute and impeller increase pump efficiency
  • Safety features promote accident-free use
    • Automatic engine shut-off if oil level becomes too low
    • Spark arrester prevents release of flammable debris - USDA approved
  • Strong, tubular steel frame with black finish
  • Includes:
    • Trash water pump
    • 12' Inlet hose
    • 25' Discharge hose
    • Oil funnel
    • Engine oil
    • Spark plug socket
    • Owner's manual


  • Water flow speed: 255 GPM
  • Suction port diameter: 3"
  • Discharge port diameter: 3"
  • Inlet hose length: 12'
  • Discharge hose length: 25'
  • Total head lift: 85-5/16'
  • Vertical suction head lift: 23'
  • Minimum working temperature: 45 degrees F.
  • Maximum working temperature: 104 degrees F.
  • Noise level (normal conversation is 60 dB):
    • Measured at 23' away: 68 dB
  • Engine type: A-iPower 208-cc, horizontal shaft OHV
  • Engine hp: 7
  • Fuel tank capacity: 0.95 gal
  • Oil capacity: 0.63 qt
  • Oil type: SAE 10W-30
  • Dry weight: 77 lbs
  • Dimensions: 22" long x 18-1/2" wide x 17-1/2" tall
  • 1-Year limited warranty


  • This pressure washer is not legal for sale or use in the state of California.
  • Gas water pumps produce carbon monoxide, which is poisonous. For your safety, always be sure to operate this gas-powered water pump outdoors.


Meets the following important certification standards:

  • US Environmental Protection Agency (EPA)

APW80 AI Power Trash Water Pump - 255 Gallons Per Minute - 3" Suction and Discharge Ports

Installation Details 289-AWP80 Installation instructions

California residents: click here

Video of A-iPower Trash Pump - 255 Gallons Per Minute - 3" Inlet and Outlet Ports

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for A-iPower Tools - Shop Tools - 289-AWP80 Review

Speaker 1: Today we're going to take a look at the A-iPower Trash Water Pump, with the three inch inlet, and the three inch outlet ports. This trash water pump features a powerful seven horsepower gas engine. It starts easily, provides ample power to the pump to ensure smooth, trouble free operation. The pump itself is self priming, for quick and easy operations. And it is designed to pump large amounts of water, which can contain hard and soft solids, such as mud, leaves, small twigs, sand and sludge. As we mentioned, the inlet port and outlet port are both three inches in diameter.

The engine is a 208cc, seven horsepower, four stroke single cylinder, air cool gas engine. It does use an overhead valve design for cooler and cleaner operation, and it does offer the easy to pull recoil start. It does use a cast iron cylinder sleeve to provide extended life.The fuel tank right above the engine, it's a heavy duty all steel fuel tank. Fuel capacity is just under one gallon. It uses a dual element air filter, protects your engine while allowing extended service intervals, and it does offer a low oil shutdown, which will automatically protect your engine from potential damage.

Right back here they use a low tone muffler, with a USDA approved spark arrestor, to provide quiet operation. And the oil they recommend in this is an SAE-10W-30. Does include everything shown here. We'll go through the items.Offers a 12 foot long clear inlet hose, with the inlet strainer on the end. A 20 foot discharge hose, all the hose clamps, joint coupler, couple of gasket that you need.

Also comes with a nice tool kit, with a spark plug socket tool and a wrench. It comes with a container of engine oil, and the oil funnel to install it. And a nice large owners manual that will describe how to put this all together and how it operates. A few specs on this, the suction port diameter is three inches. Discharge port diameter is three diameters.

A pump type is a self priming pump. The pump housing is aluminum. The impeller on the inside is a five vein cast iron impeller. The flow on this pump is 255 gallons per minute. The engine, we already mentioned, is a seven horsepower engine, starting system is manual start. The run time at half-load is about four hours. And the noise level on the engine, just to give you an idea a normal conversation is about 60 decimals, this one measured at 23 feet away at 68 decibels.Maximum working temperature is 104 degrees Fahrenheit. Minimum working temperature is 45 degrees Fahrenheit. Total weight on this pump, is about 77 pounds. Has nice black powder coated frame around it, and a few dimensions on this. It's about 22 inches, by about 17 and a half inches, by about 18 and a half inches tall. That should do it for the review on the A-iPower Trash Water Pump with the three inch inlet and outlet ports.


Ask the Experts about this A-iPower Tools

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tools for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tool information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Updated by:
Sarah W
Edited by:
Daron K
Written by:
Alex H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924