1. Tonneau Covers
  2. Retrax
  3. Retractable Tonneau
  4. Matte Black
  5. Low Profile - Top of Bed Rails
  6. Manual Tonneau
RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black

RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black

Item # RT80362
lowest price pledge
Our Price: $1,869.00
Tonneau Covers

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 100 lbs
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle. Lowest Prices for the best tonneau covers from Retrax. RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black part number RT80362 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (10)
  • Q & A (1)
  • Videos (2)
  • Photos
  • Why etrailer?

Retrax Tonneau Covers - RT80362

  • Retractable Tonneau
  • Matte Black
  • Retrax
  • Low Profile - Top of Bed Rails
  • Manual Tonneau
  • Not Rack Compatible
  • Aluminum
  • Opens at Tailgate
  • Hard Tonneau

Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.


  • Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements
    • Deters theft and keeps your cargo out of sight
    • Reduces wind drag and improves fuel economy when closed over truck bed
  • Retractable design allows for full truck bed access in seconds
    • Sealed ball-bearing rollers help cover roll smoothly without need for lubrication
    • No joints or hinges to trap dust, wear out, or freeze
  • Locking handle lets you easily open and close the cover, and secure it at any point along the rails
    • Latch it partially open to conceal cargo in the front of your bed while leaving room for oversized loads at the rear
    • Close and lock the cover for maximum security when used in conjunction with your locked tailgate
  • Space-saving canister stores retracted cover and shields it from the elements
    • Spiral track system keeps cover from rubbing against itself, preventing wear and tear
    • Angled bottom takes up less space in your bed, leaving more room for cargo
    • 2 Drain tubes included to let out any water that gets inside canister
  • Side rails sit 1" above truck bed for a low-profile look
  • Superior protection for your cargo
    • Weather stripping and foam seals on all sides keep moisture, snow, and dust out of bed
    • Cover overlaps top of tailgate to prevent water from leaking inside
  • 1" Thick, durable aluminum is impact and weather resistant
    • Matte black finish is scratch resistant and won't fade in the sun
  • No-drill installation - rails easily clamp onto your truck bed rails
  • Made in the USA


  • Weight capacity: 500 lbs evenly distributed
  • Canister dimensions: 13-1/2" deep x 12" tall
  • Limited lifetime warranty

The RetraxPRO MX offers the most security and the best protection for the items in your truck bed. This aluminum tonneau cover has a snow load of 500 lbs and can withstand impacts and inclement weather. And you can secure this retractable cover at any point along the rails with an easy-to-use, locking handle, all to ensure that your gear stays safe and protected.

Smooth, Retractable Operation

Retrax sealed ball-bearing rollers

This tonneau cover retracts quickly and easily for complete truck bed access. It does this by gliding along the side rails with sealed ball-bearing rollers, which also prevent the cover from binding or retracting unevenly. The RetraxPRO MX has no joints or hinges that can wear out, freeze, or trap dirt. It does not need to be lubricated and it has no springs that can fail. Unlike other truck bed covers on the market, you won't have to struggle with pull straps, hook-and-loop fasteners, or snaps every time you open and close the cover.

Retrax pop-up handle

At the end of the cover, on the driver's side, there is a pop-up handle that makes it easy to slide the cover up and down the length of your truck bed with just one hand. The handle must be popped up for the tonneau to move, but you can push or pull the cover to guide it along the rails from either side of your truck.

Retrax spiral track system

When not in use, the cover rolls up into a space-saving storage canister at the bulkhead of your truck, so you'll never have to remove the tonneau to access your cargo. This canister has a unique spiral track system that keeps the cover from coming into contact with itself while it's retracted. This helps prevent wear and tear on the cover while you're opening and closing it.

Retrax canister with drain tube

With the cover fully retracted, the entire canister assembly only takes up a small portion of your truck bed. And the angled bottom of the canister gives you more space to slide long items or small gear underneath it.

Maximum Security and Protection for Your Cargo

Retrax lid covers key

When the RetraxPro MX is closed, potential thieves will find it nearly impossible to access the items in your truck bed. The locking handle is mounted flat and is concealed with a lid, keeping it well hidden from prying eyes. This flat, weather-guarded lid also keeps out dirt and debris to prevent internal corrosion in the keyhole, ensuring that the lock lasts longer and won't seize up.

Retrax lock and pop-up handle

To unlock the cover, lift the lid on the lock, insert and twist the key, and press the button to release the pop-up handle. Once the handle is up, you can slide the cover back.

Latch Retrax cover anywhere on rails

You can latch the cover at any position along the rails by pushing the handle back down. This lock-in-place feature enables you to carry long items that overlap your tailgate while still covering cargo, such as a tackle box, that's stored closer to the bulkhead of the truck.

Retrax cover operates independent of the tailgate

This cover is better at preventing cargo theft than soft covers, which can be cut open with a knife. It also cannot be pried up at the edges like some hard, folding covers. As a result, your cargo and truck bed are secure when this cover is closed and latched, as long as you lock your tailgate as well. Conveniently, the cover operates independent of the tailgate, so you can open and close the tailgate without touching the cover, and you can open and close the cover without disturbing the tailgate.

Retrax weather strip

To keep snow, water, and dust out of your bed, the tonneau cover includes weather stripping and foam seals. An automotive-grade weather strip ensures a firm, dependable seal along the bulkhead of your truck. Attached to the bottom of each side rail is a foam seal that conforms to the shape of your bed rails. These seals help to prevent any scratches on your bed rails as well as fill any gaps to keep your cargo from getting wet or dirty. The cover also overlaps the top of the tailgate for additional protection against intrusive dirt and debris.

Durable, Long-Lasting, and Attactrive Cover

Retrax attractive cover

The RetraxPRO MX is constructed of heavy-duty aluminum slats that are 1" thick. They have excellent dent and impact resistance to keep the tonneau from getting damaged by falling debris or by thieves who attempt to break in by force. In addition, this cover can hold up to 500 lbs of snow or evenly distributed weight when it's rolled out. And on top of that, its durable matte black finish is weather and scratch resistant.

Retrax drain tube

To prevent mildew from forming on the cover while it's rolled up, the RetraxPRO MX features a water management system that channels excess water out of the storage canister. Two drain tubes attach to the bottom of the canister to remove any water that gets inside. The tubes then route water through the existing drain holes in the floor of your truck bed, ensuring that the stored cover remains as dry as possible.

Retrax flush design

When rolled out, this tonneau sits nearly flush with the back of the canister to give a streamlined look. In addition to the flush-mounted locking handle, the sleek frame features a top panel that overlaps the bulkhead of the truck and storage canister, eliminating the gap in between.

Retrax extends over 5th wheel

The low-profile side rails mount just 1" above your truck bed, which offers a sleek look while still providing enough clearance for most 5th-wheel hitches to remain installed beneath the cover.

Easy, No-Drill Installation

Retrax installation parts

To install the RetraxPRO MX, begin by attaching the side rails to the canister with the provided screws.

Retrax installation

Because the cover comes preinstalled inside of the canister, it will take 2 people to lift the assembled unit and place it on your truck. Once the cover is in position, make sure that the side rails are square on your truck bed rails. Then secure them in place with the bolt-on clamps. Finally, install the drain tubes in the canister and route them through the factory holes in your truck bed.

80362 Retrax RetraxPRO MX Hard Bed Cover - Retractable - Aluminum - Matte

Installation Details RT80362 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Video of RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Manufacturer Installation of the Retrax Tonneau Covers

Connect the front cover below the rails, using the front cover mounting screws. Pull the protective film off the spiral canister. Apply the rubber washers to the drain tub fittings, and connect the drain tubes to the 1/2" holes located on the bottom of the spiral canister. Once you've assembled the Retrax cover, two people should work together to lift the cover onto the truck bed. Once the cover is in place, insure that the weather strip on the front of the cover is laid out properly on top of the bulkhead of the pickup, pointing toward the cab. Close the tailgate, and using the measurement tool that is supplied, measure 1/8" between the bottom notch of the rail and the inside face of the closed tailgate.

Next, install the clamps. Start with the locations closest to the canister. The clamps are mounted between the rail adjustment screws. Then attach the rear set of clamps. Once the cover is secure, direct the drain tubes so that they drain water out of the truck bed. Drain holes vary on different makes and models of trucks.

Once finished, open and close the cover, making sure that it is rolling without binding. If needed, turn the rail adjustment screws so rails remain parallel. Pull off the protective film, and double-check that the keys and lock work properly. Now that the Retrax Retractable Bed Cover has been installed, you're ready to take it out on the road.

Customer Reviews

RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black - RT80362

Average Customer Rating:  4.8 out of 5 stars   (10 Customer Reviews)

Retractable cover opens and closes manually with a pop-up, locking handle. That, paired with impact-resistant, 1" thick aluminum, will give you the best security for the cargo in your bed. Sleek, streamlined design complements your vehicle.


Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

Excellent product. The retractable cover opens smoothly and easily, and it locks very securely. The installation instructions were very clear and easy to follow -- and there are some helpful videos Took me about 90 minutes to install. I'm very happy with this truck bed cover. It's not cheap, but it appears to be a well-made product.

- RT80384

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

A very nice cover. So far, it’s kept the bed and it’s contents dry. I had the face of the cartridge (the part that becomes the rear of the bed) sprayed with Line-X to match the rest of the bed and to offer some degree of protection. But the metal is very thin there and it didn’t take long for it to become dented. Also the drain fittings that attach to the bottom of the cartridge are delicate. I’ve had to order replacement fittings and it looks like the second set have broken again.

Paul, thank you for your review. I see that you are having issues with the drain fittings. I know that this item has a limited lifetime warranty. I would check with Retrax to see if they can send you extra fittings. If you would like to get replacement parts from etrailer I have attached a link.
-- Etrailer Expert Sierra K - 02/01/2021

- RT80383

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

What I appreciate the most is this cover is low profile (works with my fifth wheel) and can be operated from the side and locked in position wherever I'd like. Just the other day I took note of someone with a different brand that required a rope to pull closed. I'm glad I went with the aluminum version as it feels and sounds solid. The finish has stayed great looking. After watching a few installation videos while waiting for it to arrive, the process went very smoothly. The only time I needed assistance was in lifting the assembled parts up onto my truck. Here are the things I wish were better/different: Front seal - the instructions state to trim the front rubber seal to follow the lines of the hardware (so there isn't a little exposed flap of rubber). Having done that, the small pieces on the sides have vibrated out into the newly empty space. This is a minor thing. Mounting system - I installed the mounts as instructed, and did not over-tighten things. A number of months later I spent the day exploring on some unpaved Utah backroads. The bumps caused all four of the mounts to let go, drop into the bed of the truck, and the whole cover system shifted around on the truck. I contacted etrailer and their advice was to tighten the mounts more aggressively and they'd replace the screws if I damaged them. I have not had the issue repeat itself. Locking Partially Open - This has worked very well until recently. I can have the cover 25% of the way closed while towing, protecting the items at the very front of the bed. However I now want to have the cover 90% closed and locked when I have a tailgate pad installed on my truck for carrying bicycles (and this is when the bikes are not with me). When I do this and drive around, the cover slides open a foot or two from when I've been hitting the brakes. I haven't tried to figure out how to correct this yet as it is a new issue. Overall I'm very happy and would buy the RetraxPRO again.


Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

This product was very easy to install and is made of good quality. After having this on the truck for about a year it still works perfect and looks like new.

- RT80232

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

I have owned this roll top truck bed cover for a year now and still absolutely love it. I've owned other similar ones over the past twenty five years and this one is and has been the best. Sturdy, solid and so far, maintenance free. It certainly more weather (water) resistant as well. It definitely was more expensive than the other covers I've purchased in the past but the bitterness of poor quality remain forever and the higher cost of something well made are soon forgotten as you use the product everyday. Highly recommend.

Still just as satisfied with it. Looks great, truck looks good with it on, Id still recommend it.
Loren - 12/05/2018

Still just as satisfied with it. Looks great, truck looks good with it on, Id still recommend it.
Loren - 12/05/2018

- RT80485

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

Very nice product with excellent installation instructions and videos.

- RT80384

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

One year later it's still like new! eTrailer shipped it to a Campground we were at for a few days as we Travel around the Country full time. The box was heavy but it was delivered to our RV Door. Minimal assembly is required. It's all heavy Aluminum 2 inch wide Role Cover Slats that will support up 500 lbs of weight on top. So if you are Boon Docking you can go get Water putting the 50 gallon Bladder on top and your 35 gallon Waste Tote on the Bed. The original reason for the purchase was to keep Dirt, Leaves, Rain and People out of the Bed when not hooked up, which is most of the time even when traveling. It is a GREAT Cover !

- RT80485

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

Great product, great directions and great fit.

Down to 3.5 stars. Have had a couple of issues with the clamping mechanism at the side rails. The rail actually has a hole almost all the way through it now. I put a rubber stopper there to help keep it from getting worse.
Dan M - 02/06/2021

Thank you for your review. You can reduce the wear that the pin is causing by adjusting it down slightly with a hex wrench. If you are still having issues I would contact Retrax about their warranty.

-- Etrailer Expert Sierra K - 2/9/2021

- RT80384

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

Works and looks great. Came missing one adjustment screw and manufacturer immediately sent not one, bu several replacement screws, no questions asked. Wasn't sure if it would be worth the price but over one year of ownership it's proven to be second only to a winch as the best truck tool/accessory I've owned.

- RT80232

Review from a similar RetraxPRO MX Tonneau Cover in Tonneau Covers

The product surpassed the manufacture d ecription


Ask the Experts about this Retrax Tonneau Covers

  • Retractable Tonneau and Crossbars or Ladder Rack for 2015 Ford F-250
    For your 2015 Ford F-250, the RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte # RT80323 for 8 foot bed or for 6-3/4 foot bed # RT80362 (or Lexan # RT60362) are confirmed to fit. The Lexan you referenced is a hard polycarbonate and is great for snow and extreme weather. The TracRac TracONE # TH27000XT will not work with that Tonneau. You can add track mounted roof rack like feet # RRRLT600 and crossbars like # RRVA180B-2. For a similar tonneau and ladder rack I...
    view full answer...

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tonneau covers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tonneau cover information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Hayden R
Installed by:
Hayden R
Employee Wilson B
Updated by:
Wilson B
Employee Mark S
Updated by:
Mark S
Employee Ronnie R
Written by:
Ronnie R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-1624