bing tracking image
  1. Tonneau Covers
  2. Extang
  3. Fold-Up - Soft
  4. Standard Profile - Top of Bed Rails
  5. Not Rack Compatible
  6. Canvas and Vinyl
Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas

Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas

Item # EX94456
Our Price: $549.99
You Save: $125.00
Tonneau Covers

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 35 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed


Need help with installation?
Locate installers near me
The Trifecta Signature 2.0 tonneau mounts using a self-contained clamping system instead of rails, allowing for temporary use and rapid installation and removal. This soft, tri-fold cover sports a matte black canvas skin that is durable and sleek. Great Prices for the best tonneau covers from Extang. Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas part number EX94456 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (30)
  • Q & A (0)
  • Videos (1)
  • Photos

Extang Tonneau Covers - EX94456

  • Fold-Up - Soft
  • Standard Profile - Top of Bed Rails
  • Not Rack Compatible
  • Extang
  • Canvas and Vinyl
  • Matte
  • Opens at Tailgate

The Trifecta Signature 2.0 tonneau mounts using a self-contained clamping system instead of rails, allowing for temporary use and rapid installation and removal. This soft, tri-fold cover sports a matte black canvas skin that is durable and sleek.


  • Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements
    • Aerodynamic style reduces wind drag, improving gas mileage
  • Self-contained cover completely removes from truck bed
    • No rails to remain on bed once tonneau is removed
    • Attachment hardware is built into the cover - no separate clamps or bolts to install or lose
  • Tri-fold design allows for partial bed access in seconds
    • Lift panel at tailgate to get at contents of bed
    • Fold up and secure rear and center panels to free up two-thirds of your bed
  • Sturdy, fiberglass-reinforced nylon clamps ensure a secure truck bed when tailgate is closed and locked
  • Snap-on rubber seals help to keep water out of your truck bed
  • Aircraft-grade, rustproof aluminum bows and frame have durable black powder coat finish
  • Premium, vinyl-backed canvas skin is permanently attached to frame
    • Durable canvas won't shrink or expand as much as vinyl
    • Matte black color and texture is super sleek
  • Cover rests on top of truck bed side rails
    • Sits 1" to 1-1/2" above bed rails
    • Will not work with stake-pocket-mounted accessories
  • Hassle-free installation with no tools or drilling
    • Jaw-Grip clamps secure front panel to truck bed flanges at the cab
    • Spring-loaded EZ-Lock clamps secure rear panel to truck bed side rails at the tailgate
  • Made in the USA


  • Approximate weight: 35 lbs
  • Lifetime warranty

Trifecta 2.0 Tonneau Cover

The Trifecta Signature 2.0 combines a soft cover look, a hard cover folding design, and an easy-on/easy-off mounting system for a truck bed cover that is both simple and stylish. The 2.0 features clamps that lock and are easy to install and remove, a strong frame and rugged hinges to support the cover, and snap-on rubber seals for better weather protection. This custom-fit tonneau looks sporty, shields your bed and cargo from the elements, and boosts fuel efficiency. It folds up two-thirds of the way or removes easily for those times when you need to haul bulky cargo or tow with your fifth-wheel or gooseneck hitch.

Self-Contained, Rail-Less Tonneau Cover

Simple is definitely better with the Trifecta. This tonneau is completely self-contained, meaning no assembly is required. You don't have to mount separate rails and clamps to your truck bed side rails. And there is absolutely no drilling required. No tools, no hardware, no hassle. And when you remove the cover, there is no indication that it was ever there. You can use your truck for work during the day and get a clean, sporty look for your night out. And you can quickly and easily remove the cover to transport large cargo in a pinch.

Trifecta 2.0 Tonneau Cover clamp demo

The secret behind the Trifecta's simplicity and versatility is the built-in clamps. These T-style clamps fold up and store inside the bows of the front and rear panels of the cover. Just pop out the clamps, pull them down, and hook them under the bottom lip of your truck bed's side rails. With all 4 clamps attached, the tonneau cover will remain securely in place.

Convenient Folding Design

Trifecta 2.0 Tonneau Cover closed-opened

The Trifecta's tri-fold design lets you easily access the rear of your truck bed. Just open the tailgate, reach under the cover, and undo the spring-loaded EZ-Lock clamps to release the rear panel. Fold the clamps back into the panel's bow. Then just lift the panel up to access the rear of your bed. The middle panel doesn't latch down, so it too can be easily lifted up.

When it comes time to haul larger cargo and you need to travel with your truck bed open, the Trifecta is versatile enough to let you do so without your having to remove the tonneau. Fold up the cover from back to front and secure it at the cab with the integrated buckles to free up two-thirds of your bed. For full bed access, just undo the Jaw-Grip clamps at the cab and lift the cover off completely. Then store it until next time. Note: You cannot drive around with only the rear panel open.

If the need suddenly arises to transport large cargo and you need full use of your truck bed, the Trifecta can easily be folded up, removed, and laid in your bed, giving you the ability to transport both your cargo and your tonneau cover at the same time.

To close the cover, simply fold down the panels front to back and reattach the EZ-Lock clamps on the rear panel. When your tailgate is closed and locked, no one will be able to get in to open the cover, thus helping to safeguard your truck bed and its contents.

Sturdy, All-Weather Construction

Trifecta 2.0 Cover Construction

The Trifecta Signature 2.0 is built to last and comes with a lifetime warranty. The strong, lightweight frame is constructed of aircraft grade aluminum. The frame and bows have a black powder coat finish to protect against rust. The rugged hinges are made of glass-filled nylon with protective padding.

The tonneau skin comes permanently attached to the frame so you don't have to worry about any snaps coming undone or the fabric becoming untucked and blowing in the wind. The cover is sewn into the perimeter frame and corners instead of using the hook-and-loop strips found on other tonneaus. This integrated tuck system improves the appearance of the cover at the hinges and corners.

The vinyl-backed, black canvas skin gives the Trifecta Signature 2.0 an obvious edge over standard vinyl tonneau covers in both durability and looks. The 4 clamps are made of sturdy, fiberglass-reinforced nylon. And rubber seals run around the perimeter of the cover to help keep water out of your truck bed. These seals snap on for a more secure fit when compared with seals that attach with adhesives.

Easy, No-Drill Installation

Trifecta 2.0 Jaw-Grip Clamp

The Trifecta Signature 2.0 comes fully assembled and couldn't be easier to install. Just lay the folded cover across your truck bed, behind the cab, and then secure the front panel to your truck bed side rails using the built-in Jaw-Grip clamps. These clamps come pre-installed in the front bow of the tonneau and attach directly to the bed flanges so you don't have to modify your bed cap to install. The Jaw-Grip clamp limits the extent to which you can turn the T-handle to help prevent over-tightening and damage to the bed flange.

Trifecta 2.0 EZ-Lock Clamp

Once you've attached the front panel to your truck, fold the rest of the cover out and secure the rear panel using the built-in EZ-Lock clamps. Just pop the clamps out of the rear panel's bow so that they hang down near the side rails of your truck. Then pull on each clamp individually, maneuver the clamp so that it hooks under the bottom edge of the side rail wall, and release the clamp. The EZ-Lock clamp has a spring-action handle that is easy to use and automatically locks the cover to the truck when you release it. To release the clamps, just tug on each one and detach it from the rail wall. That's it - no drilling, no hardware, no hassle.

94456 Extang Trifecta 2.0 Signature Series Soft, Folding Truck Bed Cover

Replaces 46445

Installation Details EX94456 Installation instructionsAlternate Instructions EX94456 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Video of Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Extang Trifecta Signature Soft Tonneau Cover Review

Adam: Hi, everyone, Adam, with Today, we're going to be taking a look at Extang's Trifecta 2.0 line of tonneau covers. So what sets this tonneau cover apart from most, it is going to have a canvas top. This is going to be a little bit more scratch-resistant than your vinyl tops. And it's going to last a little bit longer. Some of those vinyl tops will shrink in the sun.

This is going to do a better job of dispersing all that heat. On top of that, you're not going to have that reflection entering into your cab when the sun is behind you. And one of my favorite parts about this tonneau cover, it's extremely easy to undo. Everything is made into the tonneau cover, so it's just a one piece unit. And whenever you're done, you're going to slide those in like so.And as you come back, you'll notice there isn't any rails that you have to install.

So there really isn't a whole lot of stuff you need to do to get this thing installed. It does have a nice rubber coating underneath with three different stages. So, that's going to help keep that water out. And as you go back, all you really need to do to undo it is just undo those little torque knobs in there. And then it'll come out basically pretty easily.

It's 35 pounds. It's really light. It is made of aluminum, which is going to be powder-coated to give it a good look and help it resist against rust and corrosion.And so this is how far it does fold up. We're not going to be able to fold it any farther, but by using the straps, we're going to be able to drive like this without having to worry about this coming undone.So in this drivable position, we are going to take up about 26 inches of our bed. But if you need a little bit more, you can just take these two knobs that hold it into place off, and you can take this thing and remove it.

We should have enough room for most of our 5th wheel hitches. They usually sit around here and they don't really sit too high because these sit flush with your rails. So if that's something you're looking to use with this installed, just check your height and make sure that you're not going to have any clearance issues there.So if your 5th wheel doesn't exceed the height of the rails of your bed, you won't really have any issues with your vinyl top hitting your 5th wheel. So when comparing this to a tonneau cover like the Extang Xceed, the Xceed, it's going to be able to fold up to your cab or your truck. This one, isn't going to allow you to do that, but it is super simple to undo if you needed to remove it. But this is a lot more cost-effective than the Xceed. You're going to spend a little . probably about twice as much compared to this one. So if that's something you really need, I would definitely go take a look at the Extang Xceed. But if that's not something that you really need, you can save a little bit of money by buying this tonneau cover. Both, get the job done, and honestly, look pretty good.So this canvas top is going to be connected to the rails of the tonneau cover. So you're not going to be able to remove it. So if you lock your tailgate, no one's going to be able to access your goods. Yes. If they had a knife, they could probably access all your stuff, but if they don't have a knife, they're not going to be able to take this undone kind of like some of those traditional canvas tops that have a hook and loop all the way around, you can just undo that. This one will give you that added protection when you lock your tailgate.So this is going to sit an inch and a quarter from the side of your bed rails. So one thing I would add with this tonneau cover is, it's pretty dark in there and we don't even have a drop-in bed liner. So with the drop-in bed liner or line-X spray, it's going to be a lot darker in there. I know Extang makes a E-light. So their light is designed to fit into this track system. So if that's something you need it, isn't going to light up the whole entire bed. But I know that Truxedo does make a nice, hard-wired lighting system for the whole entire bed of your truck. So whatever you need, if you need a little bit of light or a lot of light, we have that available here on comparing to the Extang Xceed. So with the Xceed, we're going to have multiple different releasing points. We're going to have one here, second one here, third one here, and then it's going to fold up. And with that folded up, it's still going to take about nine inches of our bed, but it will fold up all the way, like so. With the Trifecta 2.0, we are taking up less of our bed when it's in that position. So this Xceed is going to stick out around 31 to 32 inches, which is going to be about five inches more than our Trifecta.So all in all, with the Trifecta, it really is the easier tonneau cover. It took me maybe five minutes to get it done. Everything's built in, it comes preassembled. Tool-free install. It really does make it a lot easier than the Xceed over there. And on top of that, it's more than half the price. So if you're really not too picky and you just need something to get the job done, they're all going to keep out water the same. And they all look pretty good.Well, driving with this tonneau cover looking at it in my rear view mirror, it doesn't have any type of glare like you have with those vinyl tonneau covers. There's no glare. I can assume that it's probably quieter because I don't really hear a whole lot. And one of the main things, it was just a very, very easy install. It took me maybe five minutes at most. So let's just go ahead and I'll show you guys how easy it was.So to get this tonneau cover situated on our bed, all we really need to do is grab it like so, and as you can see, the hook portion is what's going to go against your cab. So we're going to put that up, try to line it up properly. Once that's on there, we can go underneath and fasten them down. So this is a tool-free install. All you really need to do is just fit it under like so, and twist it till it's tight. And you're going to have one of these on each side. So once this is nice and tight, you can do the same exact thing on the other side. And this truck bed doesn't have a drop-in liner, but some of them do come up and meet your rails here. If that's the case, you might have to drill a little hole, but it won't be a big one, but this should be able to fit with almost every single truck bed you have. It's that simple.So once you get that done, there's not really a whole lot else you need to do, just unfold these. Make sure everything's lining up nicely and it is. And then what we can do, we can go underneath and latch this back into place. So these do stowaway up top like so, and what we're going to do is it is spring loaded. So once we get to the desired spot clamp underneath like that, and that's nice and solid into place. And once you do both sides, is literally all there is to it.Well, everyone, thanks for tuning in and watching and taking a look at our Extang Trifecta 2.0 tonneau cover..

Customer Reviews

Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas - EX94456

Average Customer Rating:  4.8 out of 5 stars   (30 Customer Reviews)

The Trifecta Signature 2.0 tonneau mounts using a self-contained clamping system instead of rails, allowing for temporary use and rapid installation and removal. This soft, tri-fold cover sports a matte black canvas skin that is durable and sleek.



Excellent cover for my F350 (2019, Short Bed). Still looks new after a year. Good things:
- Easy installation with good fit.
- Keeps bed and contents dry. (I also love my BedRug XLT, so a small amount of water wouldn't be noticed anyway.)
- Quick and easy to fold to cover front 1/3 of truck bed (< 1 minute).
- Easy to remove (< 3 minutes).
- Very little movement, even at freeway speeds.
- Cleans easily: Blow off dust. Spray off bird droppings.
- Looks good: Much better than cheapie vinyl covers.


I love this cover. Very easy to install and when you need to remove it, also very easy. Looks great. I paid about $100 more by buying from etrailer. Go to Extang and buy direct, much cheaper.


This is my second Tonneau cover from Extang. The first was 1.0 I like the look of the 2.0 better, but the functionality of the 1.0 seems better to me. One of my tailgate-end hold-downs keeps sticky, and I have to futz with it to get it to clamp. I also wish the next version would have a way to keep the front straps from sliding from their useful position when the cover is down. In the end, if I buy another pickup, the first accessory I buy will be another Extang!


This is my first tonneau and I am very happy with how easy it is to install and how versatile it is. Having used a canopy for years, this suits my current needs perfectly.


East to install. Have had it for year, still looks brand new. Easy to keep clean, no fading. Love the ability to fold it, but not remove it to put things in the bed of my truck. But have removed it for larger items, and is is simple and tasks only a few minutes. Great buy and look forward to using it for another year.


One year and no rips, stains, or fading. Also, easy to take off and put back on when we use our truck bed tent. But, I still haven't figured out when to use those two extra strap clips. Don't need them to tie down the folded cover, don't seem to attach to the truck bed. I guess it's just a tonneau cover mystery.


Installation on my 2019 Honda Ridgeway was a snap following Utube instructions. Bed remains dry in heavy snow and rain , even at highway speeds. Easy to remove and store during summer months when I am hauling bikes.


After one year it still looks like it just came out of the box. Easy to use and looks great.


Great product. Fast shipping. Very sati sfied.


Great fit, very easy to install, appears to be very well made. There is no noticeable flapping or movement of the cover at highway speeds. Love that there are no installed side tracks allowing a quick return to original bed if required. Bed and contents stay dry even when parked in the rain.


Great tonneau cover! Fits well, easily flips up for access or to haul something sticking up out of the rear of the truck bed. Only takes 30 seconds to completely remove if hauling something bigger in the bed. After a year the vinyl backed canvas has not shrunk, is still a deep black and has not faded at all.


The cover is exactly what I was looking for. It’s easy to remove, lightweight and high quality. No leak issues either. Would definitely purchase again!


This cover is so much richer looking than a plain vinyl tonneau cover. The canvas cover never looks dirty. It is just a great cover.


Cover went on super easy and looks to be good quality.


This product is the best out there! I have had this on my truck for a year and it still looks new and working perfectly.


Cover has held up well. Have a couple of areas where it looks like an animal tried to chew on it but otherwise still great


Have to say that this is not the greatest money I've ever spent. I had another one on a short bed and it worked great. This one I have to say is junk the do in the summer leaves just enough water on it that it actually sinks in and leave the puddle on it and it's not very tight it's not very square doesn't fit my bed very well and I'm just not happy with it.


No signs of wear. Easy to open and clos e.


Worked as advertised!! Thank You


Love it so far! Easy to install, take down and put back up.


The communication was great. Everything I ordered was what I expected it to be.


Everything I needed for a perfect fit. Easily installed in about an hour.


Products arrived in a timely manner, fit as designed. Very good prices as well!


Great product. Still looks great!

Show More Reviews

See what our Experts say about this Extang Tonneau Covers

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mark S
Updated by:
Mark S
Employee Jason W
Written by:
Jason W
Employee Adam E
Installed by:
Adam E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924