1. Tonneau Covers
  2. Access
  3. Roll-Up Tonneau
  4. Soft Tonneau
  5. Inside Bed Rails
  6. Standard Profile
Access Toolbox Edition Soft, Roll-Up Tonneau Cover

Access Toolbox Edition Soft, Roll-Up Tonneau Cover

Item # A62339
lowest price pledge
Retail:$589.00
Our Price: $500.65
You Save: $88.35
Tonneau Covers

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 40 lbs
Quantity: 
Access Tonneau Covers - A62339
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Designed to fit behind your truck-bed toolbox, this tonneau features the XT-Dial, AutoLatch, Element weather seal and Access Slantback design - plus a tight seal between the toolbox and cover. Tonneau sits 1-1/2" above your vehicle's bed. Lowest Prices for the best tonneau covers from Access. Access Toolbox Edition Soft, Roll-Up Tonneau Cover part number A62339 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (21)
  • Q & A (7)
  • Photos
  • Why etrailer?

Access Tonneau Covers - A62339

  • Access
  • Roll-Up Tonneau
  • Soft Tonneau
  • Inside Bed Rails
  • Standard Profile
  • Vinyl
  • Requires Tools for Removal
  • Gloss Black
  • Opens at Tailgate

Designed to fit behind your truck-bed toolbox, this tonneau features the XT-Dial, AutoLatch, Element weather seal and Access Slantback design - plus a tight seal between the toolbox and cover. Tonneau sits 1-1/2" above your vehicle's bed.


Features:

  • Custom-designed tonneau cover installs behind your toolbox to protect your vehicle's bed and your gear
    • Fits behind most 19" - 21" wide, over-the-rail toolboxes
    • Sits 1-1/2" above truck box when closed
    • Slantback design gives your truck a stylish look
  • Aerodynamic cover reduces wind drag, improving gas mileage by up to 10 percent
  • Soft tonneau rolls up in seconds to allow full use of your bed
    • Peels back off the Velcro seal on sides of truck box
    • Stores neatly behind your toolbox with premium straps and clips
  • Truck bed is secure when cover is down and tailgate is locked (tailgate lock sold separately)
    • Deluxe AutoLatch II automatically engages 2 locks when the cover is closed
    • One-hand release makes opening the cover quick and easy
  • Durable, UV-resistant vinyl cover retains its shape and won't fade
    • Easy-to-grip XT-Dial lets you adjust tension and fit at the turn of a dial - no tools required
  • Front header bar and Element weather seal behind the toolbox and a reinforced vinyl flap at the tailgate
    • Help to block rain, snow and dirt from getting into your truck bed
  • Contoured, black powder coated aluminum rails and bows resist rust
  • Truck tailgate and toolbox remain operational even when cover is closed
  • Aircraft-grade aluminum clamps secure tonneau rails inside truck-bed rails
    • Leaves side rails free for stake pocket and bed rail accessories
    • Includes 6 clamps for short-bed trucks or 8 clamps for long-bed trucks, depending on your application
  • 5-Year limited warranty
  • Made in the USA


Header bar on Access Toolbox tonneau cover

The Toolbox tonneau cover from Access is specially designed to fit a truck bed with a toolbox. This truck-bed cover rolls up so that you can haul bulky items or rolls down to shield and secure your vehicle's bed and cargo. The tonneau works with most over-the-rail toolboxes that are 19" to 21" wide - and open or closed, the cover won't interfere with use of your toolbox. The custom-fit cover sits 1-1/2" above your truck bed and keeps air from getting caught by the tailgate, thus reducing drag. That can improve your gas mileage by up to 10 percent. And the exclusive Access Slantback fit angles toward your tailgate to give your truck a stylish, streamlined look.


Rolled up Access Tool Box tonneau with straps

Velcro closures on the sides help seal the cover to your truck box and allow you to peel it back quickly for loading. The tonneau stores neatly behind your toolbox, secured by premium storage straps that are designed to keep your cover from rubbing against the toolbox.


The cover is constructed of double coated, reinforced UV-blocking vinyl, so it won't fade in the hot sun. The material stays flexible down to -40 F and won't shrink, regardless of the temperature. Black powder coated aluminum bows act as ribbing to support your cover and make it easy to roll up.


XT Dial tension adjuster for Access tonneau cover for truck with tool box

Customize the cover tension by turning the XT-Dial easy-grip tension adjuster at the front of the cover, near your toolbox. The special header bar forms a tight barrier between the cover and your toolbox to keep out dirt, rain, snow and ice. The Element weather seal at the toolbox and a reinforced vinyl flap at the tailgate also help to keep out the elements.


Tite Bite clamp for Access Toolbox tonneau cover

The contoured, black powder coated aluminum tonneau rails resist rust. They sit inside your truck-bed rails so that you can still use stake-pocket-mounted accessories, such as ladder racks and tie-down anchors. Easily install the rails on a truck with an under-the-rail, drop-in bed liner. Over-the-rail liners can be cut to allow room for the installation clamps. The tonneau's rails attach easily to your truck-bed side rails using Tight Bite clamps. The specially designed teeth on these clamps seize the integrated ridges in the rails, ensuring a firm grip.


Auto Latch II for Access Original tonneau cover

Once the tonneau cover is unrolled and in place, the AutoLatch II dual locking system automatically engages 2 locks - 1 on each side - to hold the tonneau closed. And locking the cover won't interfere with your tailgate - open and close it as usual or add a tailgate lock (sold separately) to get secure storage for your cargo. To unlatch the cover, simply pull the cord for easy, one-hand operation. Cover your assets with this tonneau from Access.



62339 Agri-Cover Inc. (ACI) Tool Box Rollup Truck Bed Cover

Installation Details A62339 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Access Toolbox Edition Soft, Roll-Up Tonneau Cover - A62339

Average Customer Rating:  4.8 out of 5 stars   (21 Customer Reviews)

Designed to fit behind your truck-bed toolbox, this tonneau features the XT-Dial, AutoLatch, Element weather seal and Access Slantback design - plus a tight seal between the toolbox and cover. Tonneau sits 1-1/2" above your vehicle's bed.

- A62339
by:
2015 Chevrolet Silverado 3500

The cover works great. Keeps items in the bed dry and secure but rolls out of the way really easy. I would buy it again.


Comments
The cover is doing great. Thanks
Chris H - 06/09/2018



- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers


This cover is a perfect match for a tool box! It comes with everything needed to seal the front of the box and then seals for around the cover. It rolls up and the clips hold it in place as it should. The adjustment knobs make sure you will get the best fit and coverage.



- A37FR
by:

Review from a similar Toolbox Edition in Tonneau Covers


The cover fits well over the truck bed and snug against the tool box. RAM 3500 with 8' bed.



- A62439
by:

Review from a similar Toolbox Edition in Tonneau Covers


Excellent product, took a few times adjusting the position to get the perfect fit. Just take your time and the payoff will be worth it.



- 834532004782
by:

Review from a similar Toolbox Edition in Tonneau Covers


Installed on a 2013 F150 with 6-1/2' foot bed. I had already installed a toolbox across the bed rails and then decided to add an Access cover since I knew I could get this tool box compatible version. I had an Access cover on a previous truck and knew I wanted the same brand again. Plan on buying additional bulb weather stripping as the cap between the tool box and the front of the bed is wide depending on tool box width. My gap was wider than what came with the installation kit. You have to put the toolbox exactly where it needs to meet the bed cover header. Installation was easy for the cover as the struggle was getting the toolbox weather stripping installed. I put the bulb seal in the kit on the front of the toolbox and then added my larger bulb weather stripping onto the front of the truck bed so that both mated up once the toolbox was put back into place per the instructions. Any local parts store should carry the seal material. I do like how you need to open the tailgate to operate the latching system. If you lock your tailgate, it cannot be accessed. My previous Access cover had a push button you could use to unlatch the cover with the tailgate closed. Not great if you want to keep other out of your truck bed.


Comments
I have a 12 inch tool box installed on my 2013 ford F150 sxt can I grt a cover to fit this truck.
-- comment by: John B - 07/24/2013

The Access Toolbox edition covers will only work with tool boxes that are 20-21 inches wide. With a 12 inch wide box there will be a large gap and the tonneau will not work as designed.

-- Etrailer Expert Patrick B - 7/24/2013

Comments
Is this option able to work with a back rack toolbox combo?
-- comment by: Nathan D - 12/20/2013

The objects in front of the tonneau, between the tonneau and the cab, would have to total 20-21 inches. Measure from the inside edge of the truck bed up at the cab, and back. If your tool box does not end in the 20-21 inch windown, the tonneau will not properly fit.

-- Etrailer Expert Patrick B - 12/27/2013


- 834532008453
by:

Review from a similar Toolbox Edition in Tonneau Covers


My cover arrived about a week early so no complaints here. Installation went fine so just read the instructions carefully and take your time. I also watched a YouTube video which helped as well. My only concern is there is a short section along the bed rail near the rear of the toolbox that doesn't have any sealing material (~3 inches long), so some water will likely run down the rail and into the bed. I realize the cover isn't going to be 100% waterproof but I still might run a small bead of black caulk to seal it. The cover looks great and pretty easy to roll up when you need access to the bed. However, when pulling on the string to disengage the latches to open the cover, the string popped out of the catch on the one side. I was able to wedge it back in for now, but since the string wasn't long enough to tie an end knot I'll need to fix it later (lost one star for this one). I can't speak to the longevity or how the cover material will weather and stretch/sag over time, but so far so good.



- A93VR
by:

Review from a similar Toolbox Edition in Tonneau Covers


Great product and service from etrailer. Only improvement could be better directions. I’m a stickler and admirer of good directions. The instructions for the cover were not as easy as they could be. Otherwise great product.



- A61369
by:

Review from a similar Toolbox Edition in Tonneau Covers


Perfect setup for bedrails and toolbox. Quick delivery.


Comments
Durable and no functional issues after 12 months.
Ryan L - 01/16/2021


- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers




- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers


Instructions could be better.



- A37FR
by:

Review from a similar Toolbox Edition in Tonneau Covers


Fits perfect on my 2021 ram 3500.



- 834532008460
by:

Review from a similar Toolbox Edition in Tonneau Covers




- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers


Exceptional



- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers




- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers




- 834532007486
by:

Review from a similar Toolbox Edition in Tonneau Covers


Works great for out of site out of mind, and keeping the bed dry, clean.



- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers




- 834532002337
by:

Review from a similar Toolbox Edition in Tonneau Covers


The cover went through several monsoon storms, 1" of rain in 30 mins with 60 mph winds. The cover worked perfect, my tools and generator were dry.... very happy with this product.



- A61409
by:

Review from a similar Toolbox Edition in Tonneau Covers


Happy with the product .



- 834532004782
by:

Review from a similar Toolbox Edition in Tonneau Covers


easy to install, looks great like hard cover rather than a soft one. Thanks e trailer GREAT JOB AS ALWAYS.



- 834532008453
by:

Review from a similar Toolbox Edition in Tonneau Covers


Very happy with this cover. Went on easily and fits perfectly.


33
33

Ask the Experts about this Access Tonneau Covers

  • Recommended Tonneau Cover For 2015 Chevrolet Silverado 1500 Long Bed with Tool Box
    I do have an option for you but there is only one tonneau cover that will work with a crossover style toolbox, the Access Toolbox Edition Soft part # A62339 which is a fit for your 2015 Chevrolet Silverado 1500 Long Bed. That said, in order for this option to work for you the tool box will need to be between 19"-21" wide. If not, you can replace your toolbox with the UWS Deep Truck Bed Toolbox part # UWS00366 but if this is not something you want to do either then I am afraid there are...
    view full answer...
    Image 1 for
  • Does Access Tonneau Cover A62339 Fit 2015 Chevy 3500 Silverado
    Yes, the Access Tonneau Cover part # A62339 that you referenced is a confirmed fit for your 2015 Chevy Silverado 3500 with an 8 foot bed. It's designed to allow a 19-21 inch wide tool box to fit in front of it.
    view full answer...
    Image 1 for
  • Can I Have A Tonneau Cover And Tool Box On My 2015 GMC Sierra 3500 Denali?
    determining weather the Toolbox Edition Tonneau Cover # A62339 will fit on your 2015 GMC Sierra 3500 Denali all depends on your tool box. Your tool box must sit on the rails of your truck and needs to be between 19 and 21 inches wide. If that's the case, then you can use this cover # A62339 for your 8 foot bed on your 2015 GMC Sierra 3500. I've used this tonneau cover before and really like the idea of it! Now, you don't have to choose between having a tool box or tonneau cover on your...
    view full answer...
  • What Is The Length Of The Toolbox Edition Tonneau Cover # A62329
    If you measure from the bulkhead of your truck to the inside of the tailgate, that's your bed length. the cover # A62339 will be about 20 inches less than that measurement to make room for the tool box.
    view full answer...
  • Using Access Toolbox Edition Soft Roll-Up Tonneau Cover 834532001859 With Cargo Loads
    The Access Toolbox Edition Soft Roll-Up Tonneau Cover # 834532001859 does install inside the bed rails, rather than on top of them as other covers do, but these rails are not intended as points for securing other cargo that is inside the bed. The installed cover will sit above the bed rails (about 2-inches above them) but the cover itself is not intended to support weight. Please note that this cover fits only Dodge and Ram long bed trucks, not your 2016 Chevrolet Silverado 3500 long...
    view full answer...
  • Tonneau Cover Recommendation for 2016 Chevy Silverado 3500HD Long Bed with Tool Box
    For your 2016 Chevy Silverado 3500 long bed with a tool box we have one solution that will work great but it's not from TruXedo. The only tonneau cover we have that fits your truck and is designed to fit behind a toolbox is the Access Toolbox Edition part # A62339. This is a very similar style of roll up tonneau that will work great and still give you ability to keep your tool box installed in your truck bed.
    view full answer...
  • Tonneau Cover Recommendation for a 2014 Chevy Silverado with Toolbox
    I wish we carried what you are looking for, but we don't carry hinges for tonneau covers that are custom made. We do carry some tonneaus that are custom made for trucks that have toolboxes. For example, if you have a 2014 Silverado with a 6-1/2 foot bed and a 19-20 inch wide toolbox you would want the tonneau part # A62329 as it is designed for use with a toolbox. If you had a long bed truck instead with the same size toolbox you would want part # A62339.
    view full answer...

Do you have a question about this Tonneau Cover?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tonneau covers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tonneau cover information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee David L
Written by:
David L
Employee Chris R
Video Edited:
Chris R
Employee Ronnie R
Updated by:
Ronnie R
Employee Jason W
Updated by:
Jason W
Employee Mark S
Updated by:
Mark S
Employee Adam E
Installed by:
Adam E
Employee John S
Video by:
John S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.