TruXedo Sentry CT Hard Tonneau Cover - Roll Up - Aluminum, Polyester, and Vinyl - Matte Black

Truxedo Tonneau Cover - TX1557016

Hard, roll-up cover with premium, 5-layer fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.

Features:

• Custom-fit, hybrid-style tonneau cover protects your truck bed and cargo from the elements
  • Combines strength and security of hard cover with style and convenience of soft cover
• Roll-up design lets you access full truck bed in seconds - no need to remove cover
  • Safety straps secure rolled-up cover at the cab
  • Stored cover is compact so it won't block rear window visibility or third brake light
  • Quick-release guides let you completely remove cover without tools
• Ultra-low-profile cover mounts to 15-degree-angled side rails for a streamlined look
  • Sits just 1/2" above bed rails
  • Reduces wind drag and improves fuel economy
  • Leaves stake pockets free for use with accessories
• Industrial-strength, leather-grain vinyl fabric withstands UV rays and inclement weather
• Heavy-duty, 3/4" thick aluminum slats are durable and impact resistant
  • Black slats bonded to black vinyl fabric offer a seamless look when rolled up
• Slam latches at tailgate let you easily open and close cover
  • Additional security latches at mid-point of bed offer enhanced security
  • Closed cover locks truck bed when used in conjunction with closed and locked tailgate
  • Release cables at tailgate let you easily open cover from driver's or passenger's side
• Rubber weather seals keep water and dust out of truck bed
• Easy, no-drill installation
  • Cover side rails mount to inside of bed rails with bolt-on clamps
  • Self-leveling design ensures that rails are square with bed so cover rolls out smoothly and evenly
  • Hook-and-loop fasteners secure cover to side rails
• Compatible with most truck accessories including rail caps, bed liners, and bed rails
  • Adapter kit (sold separately) may be required for some bed extenders
• Made in the USA

Specs:

• Weight capacity: 400 lbs evenly distributed
• 5-Year warranty

This hybrid-style cover combines the benefits of a hard tonneau and a soft tonneau into one. It opens faster and removes easier than a hard tonneau. The premium, 5-layer woven polyester and vinyl fabric over aluminum slats provides better protection for your cargo when compared with a standard soft cover. The tonneau rails have 15-degree angles for an ultra-low-profile look, and safely latches at the tailgate and the midway point of your truck bed provide enhanced security for your gear.

Strong, Convenient Hybrid Design

This hybrid-style cover blends the durability and security of a hard cover with the flexibility and convenience of a soft cover. The 3/4" thick, hinged aluminum slats are strong enough to protect your cargo yet offer the flexibility to enable you to roll the cover up for full bed access in seconds. The fabric top over the slats provides a seamless look and helps to protect your bed and cargo from the elements.

Ultra-Low-Profile Design

The side rails are angled at 15 degrees so the cover sits just 1/2" above your truck bed to create a streamlined look. This aerodynamic design - when paired with a covered truck bed - also reduces wind noise and drag and helps to improve fuel economy.

Quick Truck Bed Access

To access your truck bed, simply pull one of the release cables at the tailgate to release the latches. There are cables on the driver's and passenger's side so you can open the tailgate from either side of your vehicle. The cover can then be rolled up in seconds to store at the cab. This allows you to haul large or tall cargo without the need to completely remove the cover.

To store the cover, roll it tight and secure it with the attached safety straps. Then, secure the ends of the safety straps to the retaining loops on the side of the rails.

You can remove the cover completely in seconds without tools. Simply slide the quick-release guides on the underside of the header away from the side rails to release the cover.

Durable and Stylish Construction

The premium, 5-layer polyester and vinyl fabric layer of the cover is resistant to UV rays and inclement weather. This state-of-the-art material has been tested to withstand extreme temperatures from -40 degrees to 120 degrees F. The material is highly resistant to dirt, and it will maintain a clean appearance more easily than a standard vinyl cover.

The black fabric top layer and all-black aluminum slats offer a "blacked out" look when the cover is rolled up. The strong, woven material keeps the slats perfectly aligned to ensure that the cover will roll up evenly every time. Standard soft covers can get lopsided as you roll them up.

The hybrid cover's weight capacity also matches many hard covers that do not conveniently roll up. It is strong enough to hold up to 400 lbs of evenly distributed weight when it's rolled out. The aluminum slats also protect your cargo from being damaged by hail and falling objects.

Enhanced Security

The hard aluminum slats of this cover provide better protection against theft when compared with a soft cover that can be cut open with a knife. There are slam latches and additional security latches to provide maximum security.

To secure your truck bed, press down on the corner ends of the cover to fasten the 2 slam latches at the tailgate. The latches will lock the cover to the vehicle when used in conjunction with a closed and locked tailgate.

There are additional security latches located at the mid-point of the bed. These latches lock automatically with the slam latches, so you won't have to crawl to the middle of the bed to lock them. These side rail latches prevent thieves from pulling up the cover and sticking their hands underneath to get into your truck bed.

Easy, Clamp-On Installation

The Sentry side rails mount to your truck bed rails with bolt-on clamps for an effortless, no-drill installation. These in-bed rails do not overlap your truck bed stake pockets, so you can still use the stake pockets to mount accessories such as tie-down anchors.

The side rails have built-in lips to make sure that they stay square with the bed rails as you tighten the clamps. This self-leveling design makes it easy to install the rails, and it ensures the cover rolls evenly every time.

Installing the cover assembly to the side rails is simple. Place the rolled-up cover on the rails near the bulkhead of your truck. Insert the screws on the leading edge of the cover into the screw holes on the rails. Then slide the quick-release guides on the cover assembly until they lock in place under the rails.

Unroll the cover completely, and close the tailgate. Push down on the end of the cover to make sure both slam latches lock. To prevent wind from lifting the cover, press down along the length of both rails before driving. This will secure the hook-and-loop fasteners to the rails.

1557016 Truxedo Sentry CT Hard Roll Up Tonneau Cover - Matte Black

Installation Details 

This Product Fits The Following Vehicles

• 2016 - 2023 Toyota Tacoma 6 Foot Bed