Slime Tire Repair Plugs - Extra Wide - Brown - Qty 30

Video Transcript for Slime Tire Inflation and Repair - Patches and Plugs - SLM20141 Review

Today we're going to be taking a look at the slime tire repair plugs. It's going to allow you to repair puncture-related flats on ATVs, mowers, trailers, and wheelbarrows. The plugs can be used as a plug refill for the slime tire plug kit and deluxe tire plug kit. These are designed for tubeless off-road tires. You're going to get 30 brown extra-wide string plugs. Now when installing, you will need a rasp tool and a tire plug needle. These tools are not included with the repair plugs, but they are included with the kits that I mentioned earlier. To install these, you would remove any puncturing object from the tires, insert the rasp tool into the hole, slide it up and down.

That's really going to roughen the hole, and it's going to clean the inside of the hole. Remove the plug material from the backing and insert it into the eye of the needle. Insert the needle into the puncture until the plug is pushed about 2/3 of the way in, and then pull the needle straight out in a rapid motion. Cut off the excess material flush with the tire tread, and then re-inflate the tire to the recommended pressure. At that point, you're going to want to test for air leaks by applying a few drops of soapy water to the plugged area, and just repeat that process until you don't get any air leaks. If you don't have any air leaks, then you're all set to go. Please note that the repair plugs are going to be suitable for emergency tire repairs only, and that's just designed to give you enough time to get to the repair shop and get the tire properly repaired or replaced. That's going to do it for today's look at the slime tire repair plugs..