This pressure gauge lets you measure water, natural gas, steam, and other low-pressure elements. Great for use with steam boilers, natural gas lines, and other industrial or HVAC applications. Bleeder lets you easily release pressure build up.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone, I'm Ellen here at etrailer.com and we're going to be taking a look at the bulldog winch low pressure gauge. This is going to help you to see what the pressure is for your water heater, a steam boiler, anything that needs that low pressure or elemental gauge for it. So we'll just have this little chalk. It does rotate around so you can get to it, even if it's kind of at an awkward angle. And the cable or the tube also rotates at the base here. So it makes it pretty easy to get this in place, wherever your valve might be, so you can check the pressure on it.So you can take a little closer, look at the gauge itself.
You can see that it has a little rubber boot or rubber cover going all the way around. That's going to help keep it protected. So if you happen to drop it, it's not going to break or shatter. It's going to keep it nice and safe inside there. The face is going to have clearly marked lettering to make it easy to read.
And the backing plate for this is going to be glow in the dark. I'm going to try to see if he can tell on my computer screen. Or on the camera there, but it's pretty hard for that to show up. But the letters are dark enough that they show up against that kind of glow in the dark greeny background there. So it makes it easy to see, even if you're in a low light situation.Again, our chalk rotates around 360 degrees, and so does our gauge so we can get that where we need it to be.
We'll have our pressure release valve here, so you can reset it or let out any kind of steam, if you need to. Or reset that gauge to take a new reading if you need to. The tube is going to resist any kind of changes from temperature, altitude, or humidity. So it's going to work no matter where you're using it.It does come with a little storage bag. It's kind of small for this particular setup, so you might have to do something where you kind of have the cable sticking out of the top because...
Just the way that it comes out of that gauge, it doesn't really want to hang out in there completely. So kind of doing something like that, it seems to work pretty well. There's a loop and a little flap at the back so you can attach this to a hook, hang it off of an area, or maybe even put it on your belt loop if you need to have it with you.As far as the overall size, the tube here is going to be about 14 and a half inches from the top of the gauge. So if we pull that all the way out to about 14 and a half inches from the chalk to gauge. The actual gauge itself, it's about two and three quarter inches in diameter and about an inch and a quarter deep.The pressure range that this can read is between 0 and 15 PSI with an accuracy within a pound per square inch or PSI. It is covered by a one-year limited warranty. And that's about all there is to it for our look at the bulldog winch low pressure gauge. I hope review has been helpful in deciding if this is the right one for you. Thanks for watching and we'll see you next time..
Average Customer Rating: 4.8 out of 5 stars (22 Customer Reviews)
This pressure gauge lets you measure water, natural gas, steam, and other low-pressure elements. Great for use with steam boilers, natural gas lines, and other industrial or HVAC applications. Bleeder lets you easily release pressure build up.
Seems like a good tire gauge. Good grip in the hand. I feel confident in it's accuracy.
Swivel head is very convenient.
So far so good! Ordered one on another online retailer and it did not work so returned it and came to etrailer. This one does work, and appears sturdier than the other. Use it to check pressure in our Airstream Trailer and truck tires, and transmission air bags. Hopefully it will last.
This is a great tire gage! Needed the 100 psi rating to check 60 psi trailer tires. It might be nice if there was a similar gauge with a maximum pressure rating of 75 psi so you would have finer resolution when measuring auto tires at 32 psi.
Works as advertised and has held up very well
Did exactly what it should. Use it almost weekly checking truck and trailer tires. Easy to read and bleed off excessive pressure.
Has stayed accurate because I compare gauges after having one go sick.
GREAT TOOL!
Good gauge that’s easy to hold with gloves, and takes a beating with that rubber cover,
Great tire gauge. Still works great with no leaks after a year.
Works well, easy to read dial. Also a nice storage pouch to keep it safe.
This is a good Tire Pressure Gage.
Quality tools...
Service was excellent, however I have not used the pressure gage yet.
Awesome device to have. Quick, accurate, and easy to use.
Seems very accurate, works great
Simple to use. Like the carrying case.
A+++
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.