Mount this air compressor under your Jeep's seat so you can run air lockers or air up your tires after a long day on the trail. Hardware, plumbing, and electrical components included.
Features:
Specs:
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a look together at this ARB Single Motor Onboard Air Compressor for your Jeep Wrangler JL. So this is designed to fit your 2018 to 2024 Wrangler JL. This onboard compressor system is going to let you run air lockers or air up your tires. The manifold is going to hold pressurized air, providing air to actuate air lockers. This has a maximum air pressure of 100 psi, a maximum airflow of 3.08 cubic feet per minute, and a 50% duty cycle.
The thermal protection on the motor is going to keep this compressor from extreme temperature damage, the safety valve is going to keep the unit from pressure buildup, and the inline fuse with this included wiring harness is going to prevent the unit from overloading or short circuiting. The dimensions of this compressor, it's about 7 1/2 inches long, about 3 15/16 inches wide, and about 5 3/4 inches tall. And the mounting bracket that I have right here, I kinda have it loosely put together here. This mounting bracket is gonna let you mount your compressor underneath the seat of your Wrangler. On your screen, I am including some photos there for you, just from some different angles showing you what this compressor is going to look like mounted into this bracket and with all of the pieces together there.
So that, hopefully, will give you an idea of what it's going to look like when this is put together ready to be put underneath the seat of your Wrangler. Some drilling is going to be required. This bracket will also act as a heat sink to dissipate heat away from the mounting point. So this includes everything that you see here on my table before me. You are going to get this foot long reinforced stainless steel braided hose.
You're gonna get two elbow fittings, two adapter fittings, this hose coupler. And then this switch here as well. And all of the hardware that you need, I mentioned the wiring harness, and the electrical components as well. You are going to receive instructions to walk you through the installation and the operation. I think that's gonna wrap up our real quick look today.
I do hope that our brief time together was helpful for you. Again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.