Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2

Ask the Experts about this Wheel Masters Tire Inflation and Repair

• Tool To Use to Install Wheel Masters Tire Pressure Valve Extenders # WM8029135
  I'd actually use a medium set of pliers to install the Wheel Masters Tire Pressure Valve Extenders # WM8029135 since you don't have to really torque these down super tight and it would be difficult to get boxed end wrench on the curved valve.
  view full answer...
• Is Wheel Masters Tire Pressure Valve Extenders # WM8029135 Compatible with Rubber Valve Stems
  Yes, the Wheel Masters Tire Pressure Valve Extenders # WM8029135 that you referenced are compatible with the standard style of rubber valve stems you have.
  view full answer...
• How Do Wheel Masters Tire Pressure Valve Extenders # WM8029135 Install
  Wheel Masters Tire Pressure Valve Extenders # WM8029135 do just thread onto the existing valve stems on the wheels. You will not have to use any thread tape for the installation. There really aren't any tricks to installing them. The biggest challenge is reaching the stock valve stems on some vehicles. But once you overcome that hurdle you will be good to go.
  view full answer...
• Can I Use Tire Valve Extentions with TPMS Sensors
  Adding a TPMS sensor to a Wheel Masters Tire Pressure Valve Extenders part # WM8029135 with the 135 degree bend will be fine if using them with a metal valve stem on the rim which most have. The reasoning is that if you add weight that far away from the attachment point it can cause issues with flexing the rubber and causing failure.
  view full answer...
• Valve Stem Extensions for 2015 GMC Sierra 3500 Dually To Make Inflation Easier
  Thanks for the picture of your wheel and valve stem setup. I'd recommend 135 degree valve extenders like the part # WM8029135 as this will put the valve stem at a better angle than a 180 degree kit. These will work great with your current wheel setup as well that uses rubber valve stems.
  view full answer...
• Valve Extenders for Outer Dual Rear Tires
  The 45-degree bend valve extenders like the Wheel Masters # WM8029 that you referenced are usually the best option for the outer wheel on dually wheel setups. We do also have 135-degree bend extenders with part # WM8029135 if your particular wheels don't allow the 45-degree units to be a good fit. Another option you might consider is the Wheel Masters 4-Hose Inflation Kit # WM8001-135. This kit will let you relocate the inner tire's valve stem to the outer wheel while also extending...
  view full answer...
• Tire Valve Extenders for 2018 Coachmen Leprechaun Class C Motorhome
  Usually 45-deree valve extenders like the Wheel Masters # WM8029 which you referenced are the best bet but we also have 135-degree extenders # WM8029135 for when a sharper bend is needed. Another way to go is the Wheel Masters 4-Hose Inflation Kit # WM8001-135. This kit will let you relocate the inner tire's valve stem to the outer wheel while also extending the valve stem on the outer tires.
  view full answer...
• Outer Valve Extensions with No-Drill Bracket for Motorhome
  The Wheel Masters 4-Hose Inflation Kit # WM8208 that you were looking at should work well for the wheels on your motorhome. The kit includes two 9-1/2" long braided steel hoses for the outer wheels and two 13" braided steel hoses for the inner wheels of a dually. The included mounted bracket simply gets clamped to the sides of the wheels so there isn't any drilling required for installation. I have attached a short video demonstration that you can check out as well. We don't have...
  view full answer...
• Tire Valve Extenders for 2017 Winnebago View 24J Class C Motorhome
  I linked our main page for valve extenders so you can see all the items we carry but since your Winnie Class C has dual steel rear wheels I lean toward the Wheel Masters kit # WM8029135. These have a 135-degree bend and are USA-made with nickel-over-brass construction. Of course, you're free to use whatever length and bend works best for you. There are lots of different opinions on this subject to be found on Winnie forums and you might care to review some of those.
  view full answer...
• Short Valve Stem Extention For Ford E-450 Front Wheel Tire Pressure Monitoring System
  For a short extention we have a few option for your Ford E-450 with different degree bends to suit your needs. Without knowing what system you have, I'll give you options for you to compare. The Wheel Masters Tire Pressure Valve Extenders - 45-Degree Bend - Front Wheels - Qty 2, # WM8029. Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2, # WM802990. Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2, #...
  view full answer...