ShockStrap Ratchet Motorcycle Tie-Downs w Shock Absorbers - 1-1/2" x 7' - 1,000 lbs - Qty 4

ShockStrap Motorcycle Tie Downs - 297-7RSBB-M

The built-in shock absorbers on these 4 ratcheting straps compensate for the movement of your motorcycle's suspension so that each strap stays tight around the bike, even on rough roads. Soft ties won't scratch your bike. 3,000-lb Max load.

Features:

• Shock absorbing ratchet straps let you secure your motorcycle to your truck bed or trailer
• Built-in shocks absorb impact to ensure constant tension, even if your bike shifts
  • Urethane-based material stands up to extreme temperatures, saltwater, moisture, oil, fungi, and most chemicals
• Ratchet mechanism makes it easy to tighten down each strap and maintains tension on straps
  • Plastic-coated handle and release lever ensure simple, safe operation, even if you're wearing thick gloves
• 3/8" S-hooks with wide openings allow hassle-free connection to anchor points
  • Rubber coating on hooks prevent scratches and scuffs on your gear, truck, or trailer
  • Retention clips keep the hooks connected to anchor points
• Corrosion-resistant yellow zinc chromate coating on steel hardware holds up to hot, cold, and wet weather conditions
• Durable polyester webbing is UV resistant and withstands abrasions and water absorption
• DOT approved

Specs:

• Dimensions: 1-1/2" wide x 7' long
• Safe working load limit (WLL): 1,000 lbs
• Maximum load (break strength): 3,000 lbs
• Quantity: 4 ratchet straps
• 2-Year warranty

Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.

ShockStrap Motorcycle Tie-Down Kit

This tie-down kit is perfect for strapping down your motorcycle. It includes 4 ratchet straps with built-in shocks to keep the straps tight around your bike so that you won't have to stop and tighten them while traveling.

Unlike traditional straps, which don't stretch or contract, these tie-downs are uniquely designed with built-in shock absorbers that allow the straps to maintain constant tension on your load as you travel. These are great for motorcycles, which have bouncing suspension systems that can compress and rebound when you travel rough terrain.

Built-In Shocks

The webbing of standard straps can't stretch or contract to absorb impacts. As a result, standard tie-downs might become detached from their anchor points, or they may become slack around your bike as it shifts.

But these ratchet straps each feature 2 built-in urethane shocks that are designed to absorb impact and to allow give. This ensures that the tie-downs stay taut and won't loosen over time. The built-in shocks help to keep the tie-down from coming loose or failing, which could result in lost or damaged toys.

In addition, the shock ensures a longer life for the strap webbing. The constant compressing and rebounding of your bike's suspension during travel can wreak havoc on ordinary straps. The webbing is likely to experience more wear and tear as it rubs along your gear. But the ShockStrap's shocks absorb these jolts so that the webbing of the tie-downs stays put instead of wearing over the edges of your equipment.

Easy-to-Use Ratchet

Each tie-down features a commercial-grade, field-replaceable ratchet that is easy to use. To release the ratchet, grab the oversized handle and pull on the release lever. The release lever is positioned on the outside of the ratchet to ensure safe and easy operation, even if you're wearing gloves.

How to Use the ShockStrap Motorcycle Tie-Down System

Once your motorcycle is in your truck bed or on your trailer, place the front tire of the bike in a wheel chock (sold separately). Placing your toy in a wheel chock helps to hold the bike in position during travel.

Each strap has soft loops built in so that you can tie down your bike without having to worry about the metal hooks or hardware of the straps potentially scratching or scuffing it. To use the soft loops, simply cinch the strap around a secure location on the bike, and run the tie-down's hook through the loop.

There are 4 straps included in this kit - 2 for use on the front of your bike and 2 for use on the rear. Each of the straps should be wrapped around a sturdy part of your bike. At the front, this area would typically be the base of the handlebars or the lower triple clamp. At the rear, you can connect the straps to accessible points on the frame. When you attach the tie-down straps to your truck or trailer, be sure to anchor them so that the bike is pulled down at all 4 corners. Your bike should be upright, not slanted. And the straps should be angled anywhere from 10 degrees to 60 degrees as they stretch from the bike to the anchor points.

Once the hooks are in place, tighten the webbing and activate the shocks. To tighten each strap, crank the ratchet mechanism until the webbing is taut. Tightening the straps will also compress the bike's suspension just enough to maintain tension when you hit bumps on the road. You'll want to compress the suspension about halfway. The tension should be even on both sides to prevent sway and bouncing. Be sure not to overtighten the strap. If your hand cannot fit between the shock and the safety strap, the strap is too tight.

Next, you'll want to activate the shocks. To do this, just tighten the straps a bit more, stretching the shocks until light is visible through the bolt holes in each shock. In warm climates, the shocks can stretch up to 2", while in subzero climates you may only get about 1/2" of give.

Once the straps have been tightened and the shocks have been activated, just make sure your motorcycle is completely secure and then tie off any extra slack.

Strong, Durable Construction

The sturdy, UV-resistant polyester webbing of these tie-down straps has a high tolerance for abrasion and water absorption.

The shocks are made of urethane, which can withstand elements such as sunlight, saltwater, moisture, oil, fungi, and most chemicals. These shocks also function in nearly any temperature, holding up to hot and cold weather conditions without losing elasticity or becoming unyielding or brittle over time.

Each ratchet strap also features a Grade 8 bolt and nylock nut. The rust-resistant, yellow zinc chromate coating on the buckle and the hooks holds up to the roughest weather conditions. The oversized, 3/8" hooks also feature a protective rubber coating to prevent damaging your bike, truck, or trailer while in transit.

A safety strap is also built into each tie-down to provide peace of mind should something happen to the shock. This safety strap ensures that if the tie-downs are used improperly, overloaded, or unduly stretched, your bike will remain secured.

7RSBKP Shock Strap Ratchet Tie-Down Strap w Built-In Shock Absorber 1.5" x 7" - 1,000 lbs - Qty 4

Replaces ShockStrap 7RSBB