Master Lock Cam Buckle Straps w Strap Traps and Spring Clip Hooks - 1"x6' - 400 lbs - Qty 2

Master Lock Cam Buckle Straps w Strap Traps and Spring Clip Hooks - 1"x6' - 400 lbs - Qty 2

Item # 3113DAT

lowest price pledge

Our Price: $20.55

Tie Down Straps

Orders above $99 qualify for Free Shipping

Shipping Weight: 2 lbs

Quantity: 
Master Lock Tie Down Straps - 3113DAT
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Trailer
  • Truck Bed
  • General Cargo
  • 5 - 7 Feet Long
  • Cam Buckle Strap
  • Master Lock
  • Standard Strap
  • 1 Inch Wide
  • Safety Hooks
  • 400 - 500 lbs
Durable tie-downs have Strap Trap bungee cords that keep unused strap in place so it doesn't tangle or flap in the wind. Spring clips on S-hooks offer secure attachment, and sturdy straps have an abrasion-resistant coating. 1,200 lbs Max load. Lowest Prices for the best tie down straps from Master Lock. Master Lock Cam Buckle Straps w Strap Traps and Spring Clip Hooks - 1"x6' - 400 lbs - Qty 2 part number 3113DAT can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (9)
  • Q & A (33)
  • Videos (2)
  • Photos
  • Why etrailer?

Master Lock Tie Down Straps - 3113DAT

Durable tie-downs have Strap Trap bungee cords that keep unused strap in place so it doesn't tangle or flap in the wind. Spring clips on S-hooks offer secure attachment, and sturdy straps have an abrasion-resistant coating. 1,200 lbs Max load.


Features:

  • Tie-down straps let you secure cargo in your truck bed or trailer
  • Built-in Strap Trap bungee cords with toggles cinch around excess strap to hold it in place
    • Helps prevent unused strap from tangling or flapping in the wind
    • Also keeps straps neatly stored when they're not in use
  • Cam-lock buckles hold straps tight over your gear
  • Spring clips on S-hooks help to keep hooks secured to tie-down points
  • Strong, durable Monster Weave strap webbing has a Razor Coat to improve abrasion resistance


Specs:

  • Strap dimensions: 1" wide x 6' long
  • Safe working load limit: 400 lbs
  • Maximum load (break strength): 1,200 lbs
  • Quantity: 2 cam buckle straps


Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.



3113DATSC MasterLock Premium Spring Clamp Cambuckle Tie-Down Cargo Straps with Strap Trap - 1" x 6' - 1,200 lbs Max Load - Qty 2







Video of Master Lock Cam Buckle Straps w Strap Traps and Spring Clip Hooks - 1"x6' - 400 lbs - Qty 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Master Lock Tie Down Straps - Trailer - 3113DAT Review

Today we're going to be taking a look at the Master Lock Cam Buckle Straps. These tie-down straps let you secure cargo in your truck bed or trailer. These are great for cargo carrier and roof rack gear also. It's going to feature the built in strap trap bungee cords with toggles that cinch around excess strap so you hold it in place. It's going to help prevent unused strap from tangling or flapping in the wind. It also keeps the straps neatly stored when they're not in use so that's a really neat design. That's an elastic design so you can pull that slack out, push the toggle down, and that's going to hold the excess strap.

To remove the excess strap or to disengage the bungee just pull that toggle all the way up and then you can pull the strap out as necessary. Really nice easy to use design. Now two straps are included, I pulled one out of the packaging so we can get a good look and feel for how it's going to work and some of the different features that it offers. The unit's going to feature the cam lock buckles that hold the straps tight over your gear. Now I do want to be clear that this is not ratchet strap. You would simply pull the strap tight over your load and let the cam lock buckles do the job at holding the strap securely in place.

It's got serrated teeth in there, they grab onto the strap. It does allow the strap to be tightened but it does not allow the strap to be loosened. To loosen the strap you have to push down on that coated handle and then you can loosen the strap as necessary. I also want to point out that the S-hooks are going to feature these spring clips. That's going to keep the hook secure to the tie-down points. Now these are steel hooks that are coated with a protective coating to keep the hooks from doing any type of damage to anything.

It's not going to scratch anything and it's also going to offer rust and corrosion protection to the steel hooks themselves. The webbing on the unit when it comes to the strap, it's going to feature this strong durable monster weave strap webbing. It's going to have a razor coat which is going to improve abrasion resistance. These are very strong and durable. The straps are going to measure about one inch wide by six feet long. They have a safe working load limit of 400 pounds.

Maximum load or break strength is 1200 pounds and you're going to get two straps with this part number. Now when you're ready to fully disengage, push down there and then you can actually remove the strap from the cam buckle if needed. It offers really nice easy operation. Again these are not ratchet straps these are cam buckle straps. Always keep in mind that tie-down straps must be chosen according to their safe working load limit. The weight of the secured cargo must not exceed the combined working load limit of the straps being used. That's going to do it for today's look at the Master Lock Cam Buckle Straps.


Customer Reviews

Master Lock Cam Buckle Straps w Strap Traps and Spring Clip Hooks - 1"x6' - 400 lbs - Qty 2 - 3113DAT

Average Customer Rating:  4.9 out of 5 stars   (9 Customer Reviews)

Durable tie-downs have Strap Trap bungee cords that keep unused strap in place so it doesn't tangle or flap in the wind. Spring clips on S-hooks offer secure attachment, and sturdy straps have an abrasion-resistant coating. 1,200 lbs Max load.

- 3113DAT
by:

Excellent product. Small point...the red retaining bungee broke the 2nd time it was used. 65710


Comments

The tie-down straps work great and secure my beloved kayak while its in transit. Id been looking to purchase additional straps, but lost your web address. After receiving your e-mail I immediately re-ordered more straps for a couple kayak buddies.

-- comment by: Gus - 02/14/2014

2813

- 3113DAT
by:

I haven't used them yet, but they look perfect and the spring loaded clips will keep the straps attached this time. Our two new electric bikes came loose and almost hit the highway because the other strap hooks came unhooked. 522552



- 3113DAT
by:

I wish these were longer. They came up short for my intended purpose, The webbing is slick and I'm not confident the excess strap will hold. I really wanted the spring closed clips, but again with the short straps they didn't serve my purpose. I imagine the clips could secure one end without it coming loose while working the other end. For me, I have better straps. The extra features couldn't serve my purpose. 494214


Comments

They are shorter than what I needed. The locks slip and the strap holders don’t hold either. I can do better with ordinary straps. Great idea with poor execution.

Steven - 04/09/2019

52671

- 3113DAT
by:

Nice straps. Work exactly as designed! 419156



- 3113DAT
by:

I just ordered and received Master Lock Tie downs in two widths. They have the spring clip hooks. I needed this type tie downs to securely manage my kayak on top of my Jeep. I did not have the spring clip hooks type tie downs on a trip recently and when pulling out of a parking lot I hit a pot hole and the kayak fell off the rear of my Jeep! This spring clip tie down would have prevented that disaster from occurring. These are also a must for motorcycle and dirt bike tie downs. Motorcycle suspensions move so much that tie downs can come lose and the bike can fall over. If your bike is in an enclosed trailer, you won't know the bike has fallen down until you stop for fuel or make a stop and check your load. 401236



- 3113DAT
by:

These tie-down straps work excellent holding my kayak racks tightly to my utility trailer. Easy on and off with no rust yet. 391248



- 3113DAT
by:

Great product, excellent communication from etrailer. 331923



- 3113DAT
by:

5 stars 312971



- 3113DAT
by:

These type of tie-downs have their place, but have limited ability to really bear down on a load. This particular product seems well made of good quality material. 124543


9
9

Ask the Experts about this Master Lock Tie Down Straps
Do you have a question about this Tie Down Strap?


  • Recommended Hitch Adapter to Allow Use of 2-Inch Kuat Bike Rack in Class I Hitch on 2015 Acura TLX
  • Hitch adapters like # HT5R are available to allow use of a 2-inch hitch accessory in a 1-1/4-inch hitch. And this particular product also provides 5-inches of height rise to improve ground clearance. BUT...there's always one of those...use of ANY hitch adapter causes the unavoidable side-effect of reducing your hitch's rated tongue weight (TW) capacity. This loss of capacity results from the increased distance between the hitch tube and the actual rack. The greater distance means more...
    view full answer...

  • Recommendation For Front Mount Hitch And Motorcycle Carrier For 2006 Toyota Tundra
  • The Draw-Tite Front Mount Hitch, Item # 65031, that referenced is a confirm fit for your 2006 Toyota Tundra. It has a 500 lbs vertical load limit and a total weight capacity of 5,000 lbs. It has an easy, bolt-on installation with all the hardware included. You can easily attach all kinds of accessories to it including a motorcycle carrier. The Ultra-Fab Dirt Bike Carrier, Item # UF48-979033, will not work well for you because it works with 5 inch, not 7 inch, tires. I recommend...
    view full answer...

  • Hitch Adapter to Raise Height of Cargo Carrier for Batter Ground Clearance
  • We can help you with a 2-inch hitch adapter that will give you a height rise for better ground clearance with your CargoPod hitch cargo carrier. I suggest the Roadmaster 2-inch High-Low Adapter # RM-048-8. The Roadmaster has a solid steel shank for strength rather than a hollow one like the MaxxTow # MT70070 and it gives you a full 8-inches of rise. This too will reduce your hitch's rated capacity by 50-percent, the same as the MaxxTow, and it also shares the same 400-lb tongue weight...
    view full answer...

  • How to Carry Two Kayaks On 2015 F150 6 1/2 Foot bed With BakFlip Hard Cover
  • The best way to carry 2 kayaks on your 2015 F150 6 1/2 foot bed is a ladder rack. I recommend Adarac part # A4000946. The Adarac installs on the bed rails of the truck so it does not interfere with the BakFlip G2 part # BAK26327 installation location. It also allows you to fold your cover up when you need access to the bed without interference compared to other ladder racks that are not compatible with tri-fold hard covers. The bars on the ladder are 72 inches long so you can carry both...
    view full answer...

  • ShockStrap Recommendation for Tie Down to Be Used with Wider Handlebars
  • What you'd want is the ShockStrap Soft Ties for Motorcycles and Dirt Bikes # 297-2STB-2 as this will allow you to loop around the handlebars and the clip will be able to close. Typically if the bike is secured proplerly the spring clips really aren't needed. Most tie-downs for motorcycles/bikes don't have them and they simply get depressed when using on a wider bar without issue.
    view full answer...

  • Recommended Front Hitch and Motorcycle Carrier for 2018 Ford F-350
  • Starting with the front hitch for your 2018 Ford F-350 I recommend the Draw-Tite Front Mount Trailer Hitch Receiver # 65076. This is confirmed to fit your truck and will provide you with a 2 inch receiver opening and a 500 pound vertical load limit. Just note that the plastic air deflector/fascia will need to be removed for installation. It can just be left off once finished or you can trim it and reattach it with the hitch installed. I have attached the written installation instructions...
    view full answer...

  • Recommended Hitch-Mount Motorcycle Carrier for Use on Class A Motorhome
  • We do offer one motorcycle carrier that is properly rated for use in the 2-inch hitch on your Class A rig, Ultra-Fab Motorcycle Carrier # UF48-979033. This ramped carrier offers a 500-lb capacity. You will need to confirm the tongue weight (TW) capacity of your hitch to ensure it is rated high enough for the combined weight of your motorcycle and the 48-lb Ultra-Fab carrier. Their combined weight cannot exceed the hitch's capacity. You'll also need tie-down straps to secure the bike...
    view full answer...

  • Recommended RV Hitch and Motorcycle Carrier for 2011 Crusader 5th Wheel Trailer
  • In order to use an RV-rated motorcycle carrier on the back of your 2011 Crusader 5th wheel you will first need to install a 2-inch frame-mount hitch with a 500-lb tongue weight (TW) capacity. Curt hitch # 13703 that you referenced is rated only to 350-lbs so it will not work for your intended use. The linked page will show you Curt # C13701. You'll first want to measure your 5th wheel's frame - outside to outside - to confirm this hitch will fit. Once you have a hitch in place you...
    view full answer...

  • Vespa Moped RV Hitch Carrier Recommendation
  • Not every motorcycle carrier available is rated for the rougher ride quality that is present at the rear of an RV, but the Ultra Fab carrier part # UF48-979033 is rated for RV use and would be a great option. This carrier has a 500 lb capacity which would be more than enough for your 350 lb vespa. The ramp length is 39 inches. For tie-downs you may also be interested in the part # 3113DAT.
    view full answer...

  • Will The Ultra-Fab Dirt Bike Carrier Part # UF48-979033 Clear The Spare Tire On A Jeep Wrangler
  • The distance from the center of the hitch pin hole to the outermost part of the rear spare tire will vary depending on the hitch receiver installed. Assuming you have a stock tire and wheel size, the distance from the center of the hitch pin hole to the outermost portion of the spare tire is 10-1/4" while using the Curt Trailer Hitch Receiver part # 9883544, 5-1/2" using the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76104 and 11" using the Curt Trailer Hitch Receiver part # 13432. The...
    view full answer...

  • Motorcycle Carrier Recommendation for RV to Carry Honda Rebel 250
  • Not every motorcycle carrier available is rated for the rougher ride quality that is present at the rear of an RV, but the Ultra Fab carrier part # UF48-979033 is rated for RV use and would be a great option. This carrier has a 500 lb capacity which would be more than enough for your Honda Rebel 250. This carrier weighs 51 lbs which is about as light as you'll find. For tie-downs you may also be interested in the part # 3113DAT.
    view full answer...

  • Motorcycle Carrier Recommendation for Honda Helix at Rear of RV
  • I looked up the weight of the Honda Helix or CN250 and it looks like it comes in right at 350 lbs. Not every motorcycle carrier available is rated for the rougher ride quality that is present at the rear of an RV, but the Ultra Fab carrier part # UF48-979033 is rated for RV use and would be a great option. This carrier has a 500 lb capacity which would be more than enough for your 350 lb motorcycle. For tie-downs you may also be interested in the part # 3113DAT.
    view full answer...

  • Motorcycle Carrier Recommendation for Rear of 24 ft RV
  • Not every motorcycle carrier available is rated for the rougher ride quality that is present at the rear of an RV, but the Ultra Fab carrier part # UF48-979033 is rated for RV use and would be a great option. This carrier has a 500 lb capacity which would be more than enough for your 225 lb motorcycle. For tie-downs you may also be interested in the part # 3113DAT.
    view full answer...

  • Transporting Dirt Bike with Class III Trailer Hitch on 2006 BMW X3
  • The Draw-Tite Class III Max Frame Receiver Hitch # 75371 referenced in your question, which is confirmed to fit your 2006 BMW X3, features a tongue weight capacity of 350 pounds. As long as you remain under this capacity with the combined weight of your carrier and dirt bike (which it sounds like you will), you will not have an issue transporting your bike. If you do not yet have a carrier, I recommend looking at the Ultra-Fab Dirt Bike Carrier # UF48-979033. This is a really nice carrier...
    view full answer...

  • Scooter Carrier Recommendation for Use on the Back of a 2013 Leisure RV
  • K2 Tilt Down Hitch Mounted Motorcycle Carrier # K2TMC201 is not rated for use at the back of an RV or trailer so it is not going to work for you. But we do have a carrier that is rated for RV use, it is # UF48-979033. Scooters are typically shorter in terms of wheel base compared to motorcycles so you should be able to mount the heavier end of the scooter closer to the center of the carrier which is definitely what you want to do anyway. Also I recommend over securing this set up because...
    view full answer...

  • Tie Down Strap Recommendation for Handlebars that are 1 inch Thick in Diameter
  • You'd have to go to a larger size of tie down to fit over a 1 inch diameter bar like the Erickson Ratchet Tie Downs part # EM31425 which has an opening of 1-1/4 inches. The # 3113DAT is designed for bars that are 7/8 of an inch in diameter.
    view full answer...

  • Hitch and Motorcycle Carrier Use on 2006 Honda Odyssey
  • Draw-Tite hitch # 75270 is a confirmed fit on your 2006 Honda Odyssey and its 675-lb tongue weight (TW) rating is plenty for the combined weight of your motorcycle and carrier application but as you noted the car itself has a lower rating. There is no way to bolt-on more capacity to this or any other vehicle. If your combined carrier and bike weight is 320-lbs then you will be just within the vehicle's rating of 350-lbs total tongue weight. Since you will be so close to the maximum,...
    view full answer...

  • Recommended Carrier for 360-lb Scooter for Use in 2-Inch Front Hitch on 2011 Ford F-250
  • All of the front-mount 2-inch hitches offered for your 2011 Ford F-250 have the same 500-lb vertical load limit so this means your 360-lb Kymco scooter and the carrier you use to transport it must not together weigh more than this 500-lbs. The Ultra-Fab Motorcycle Carrier # UF48-979033 has a carrying capacity of 500-lbs which is more than enough for the GT300i, and the carrier itself weighs only about 48-lbs so this combination will work with your hitch's capacity. You'll want to...
    view full answer...

  • Can Motorcycle Carrier Be Mounted To Front Of A Motorhome
  • The Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 80" Long - 500 lbs # UF48-979033 can be mounted to the front of a 24V View Motorhome as long as the front mounted hitch is able to handle the vertical load weight of the Honda Rebel and the carrier combined weight of 391 lbs. The only other thing to consider is the front mounting can limit your view and should not block your headlights. To secure the carrier and the bike, I recommend the hitch lock # 40107 and the Master...
    view full answer...

  • Can Ultra-Fab Trailer Hitch Mount Motorcycle Carrier Hold a Suzuki Burgman Scooter on Class C RV
  • The Ultra-Fab motorcycle carrier, # UF48-979033, can be used at the back of a motor home and has the capacity for the scooter but there are a few other things to consider. First is the tongue weight capacity of the trailer hitch and motor home. The trailer hitch and motor home both will need to have a tongue weight capacity that is greater than the combined weight of the carrier and scooter. Based on the info you have provided that will be at least 450 pounds. Rear engine scooters that...
    view full answer...

  • Hitch Motorcycle Carrier for 2012 Honda Odyssey Touring with Class 3 Hitch
  • You can safely transport your Suzuki DR650 on a hitch mounted motorcycle carrier as long as the combined weight of the carrier and motorcycle does not exceed the hitch's 525-lb tongue weight rating or the Odyssey's if one in noted in your manual. The hitch carrier I recommend is the MaxxHaul Aluminum Motorcycle Carrier # MT70101 since it includes a loading ramp and provides a foot of clearance from the hitch pin hole to help avoid the bike contacting the vehicle. You can use Master Lock...
    view full answer...

  • Recommended 6 Foot Tie Down Straps With Cam Buckles
  • We do offeradjustable tie downs with cam buckle straps that are 6 ft long. If you need a strap that is 1 inch wide I recommend the Master Lock Tie Downs, part # 3113DAT. These have S hooks with retention clips and have a safe working load limit of 400 lbs. I have attached a product review video for these tie downs you can check out. These tie downs come with a qty of 2 in the package.
    view full answer...

  • Will Ultra-Fab Motorcycle Carrier # UF-48-979033 Haul a 2007 Honda Reflex Scooter on Dodge Ram 2500
  • If the hitch you have on your Dodge Ram 2500 has a tongue weight rating of at least 500 lbs or more, then the Ultra-Fab Motorcycle Carrier, part # UF48-979033, will be able to haul your 2007 Honda Reflex Scooter on the back of your truck. The carrier has a weight capacity of 500 lbs and a length of 80 inches. It has adjustable pull pins on the carrier that can be adjusted to fit the wheelbase of your scooter. I would also recommend the DeadBolt Hitch Lock, part # 40107, to lock the...
    view full answer...

  • Trailer Hitch And Motorcycle Carrier For Rear Of 2003 Holiday Rambler Fifth Wheel Trailer
  • We do offer a frame-mounted trailer hitch that may work for your 2003 Holiday Rambler. I recommend the Draw-Tite Class IV Weld-On 62 inch Wide Ultra Frame Trailer Hitch Receiver, part # 41991-07. This is a weld-on hitch that will fit frames up to 62 inches wide. This hitch has a much higher rating at 1,600 lbs than the 350 lbs for the # 13703 you mentioned. You will want to make sure the frame of your Holiday Rambler has the weight capacity for your motorcycle. The motorcycle carrier...
    view full answer...

  • Motorcycle Carrier for a Triumph Tiger 800 XCx
  • The highest rated motorcycle carrier we offer in regards to weight capacity is the Ultra-Fab Dirt Bike Carrier part # UF48-979033 which is 500 lb. Therefore, in order to use this carrier with your Triumph Tiger 800 XCx you will need to shed about 20 lbs. The wheelbase and tire size of your bike are within the specifications of this carrier so you should be okay in regards to that aspect. I was able to confirm that your vehicle's tongue weight capacity is sufficient for this carrier...
    view full answer...

  • Recommended Cargo Carrier for Manual Wheelchair on 2009 Ford Focus
  • For your 2009 Ford Focus the hitches we carry limit the capacity to 200 lbs and Class I. So for your cargo carrier, I recommend the 19x47 Curt Cargo Carrier # C18110. This will fit the length of your manual wheelchair but you will need to collapse it to fit the width of the carrier. It will give you a steel grate to make sure your 4 wheels have a sturdy base and then you will need to secure it with straps like the Master Lock Cam Buckle Straps w Strap Traps and Spring Clip Hooks - 1"x6'...
    view full answer...

  • Surco Rooftop Cargo Basket for Thule Roof Racks on Honda Fit
  • The Surco Safari Rack 5.0 Rooftop Cargo Basket for Thule Roof Racks, # SPS5084-T400, will work with all Thule roof racks including racks compatible with your Honda Fit. The only problem you may encounter is in the access of your rear hatch due to the overhang. I would recommend a smaller roof rack if it weren't dependent on your painting size. This rack will fit your paintings even two of them stacked within the 5" depth of the carrier, but they will be exposed to wind and weather without...
    view full answer...

  • Use of Hitch Extension with MaxxTow Aluminum Cargo Carrier MT70275
  • There are a few things to keep in mind for your desired setup. First, the weight rating of the hitch on your van must be more than the combined weight of your selected carrier and two scooters. Their combined total must be within the hitch's tongue weight (TW) rating. The MaxxTow Cargo Carrier # MT70275 weighs about 75-lbs. You can add this to the weight of your two scooters to know the total TW load that will be on the hitch. Next check the sticker on your hitch to confirm its Class...
    view full answer...

  • Motorcycle Carrier Recommendation Rated for Use Behind RV
  • For the weight of a motorcycle and carrier I'd recommend finding a welder/fabricator in your area to make you a reinforced hitch setup for the rear of your RV. That will be the best option our RV multi-fit hitches won't be ideal for that much weight on a carrier. For an RV rated motorcycle carrier though we have the the Ultra Fab carrier part # UF48-979033 which has a 500 lb capacity. For tie-downs you may also be interested in the part # 3113DAT. These are cam buckle style tie downs...
    view full answer...

  • Hitch Adapter to Provide 1-1/4-Inch Receiver Opening
  • It sounds like you want a hitch adapter with height rise that will fit into a 1-1/4-inch hitch and also provide that same size receiver opening for a 1-1/4-inch accessory. No such item exists but I can offer what may be a workable solution. The MaxxTow Trailer Hitch Receiver Adapter # MT70355 does fit into a Class II hitch with a 1-1/4-inch receiver and provides 4-1/2-inches of height rise up to its 2-inch receiver opening. If you were to use this adapter along with a hitch reducer sleeve...
    view full answer...


Do you have a question about this Tie Down Strap?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality tie down straps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down strap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Leah B
Expert Research:
Jameson C
Video by:
Dustin K
Installed by:
Cole B
Video Edited:
Chad S
Installed by:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.