Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2

Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2

Item # EM05729

lowest price pledge

Retail:$28.22

Our Price: $17.95

You Save: 36%
Tie Down Straps

Orders above $50 qualify for Free Shipping

Shipping Weight: 1.68 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock
Tie Down Straps EM05729 - 0 - 1 Inch Wide - Erickson
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Secure your motorcycle or ATV to your truck or trailer with these tie-downs. Toothless cam buckles hold straps tight without damaging the webbing, and soft loops make it easy to attach the tie-downs to your bike. 1,200 lbs Max load. Lowest Prices for the best tie down straps from Erickson. Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 part number EM05729 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (21)
  • Q & A (53)
  • Videos (2)
  • Photos
  • Why etrailer?

Erickson Tie Down Straps - EM05729

  • ATV-UTV
  • Motorcycle
  • Snowmobile
  • Cam Buckle Strap
  • Trailer
  • Truck Bed
  • 6 - 10 Feet Long
  • Erickson
  • 0 - 1 Inch Wide
  • Standard Strap
  • 351 - 500 lbs
  • S-Hooks

Secure your motorcycle or ATV to your truck or trailer with these tie-downs. Toothless cam buckles hold straps tight without damaging the webbing, and soft loops make it easy to attach the tie-downs to your bike. 1,200 lbs Max load.


Features

  • Tie-down straps let you secure your motorcycle, dirt bike, or ATV to your truck bed or trailer
  • Toothless, convenient, and secure (TCS) tensioning cam buckles will not damage strap webbing
  • Strap can be pulled to desired length, yet will not feed back through buckle while in locked position
    • Simply pull release tab to loosen tension
    • Locks and stays tight
  • S-hooks secure to anchor points


Specs:

  • Strap dimensions: 1" wide x 6' long
  • Maximum load strength (break strength): 1,200 lbs
  • Safe working load limit (WLL): 400 lbs
  • Quantity: 2 tie-down straps


Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.


Each of these motorcycle tie-downs has a toothless, convenient, and secure (TCS) cam buckle. The buckle has a non-slip spring-loaded locking action that allows for quick and easy adjustment. The toothless design will not damage the strap webbing. With the buckle in the locked position, the end strap can still be pulled through the buckle to desired length. At no time will the strap back up through the buckle. The patented design only allows the strap to go one way. To release the lock, you simply have to pull the release tab and the load will quickly let loose. Whenever you have a situation where you have 2 solid points that won't move, the TCS buckle with over-the-center lock action works great. It locks tight and stays tight.



05729 Erickson Manufacturing 1" x 6' Soft Tie TCS Motorcycle and ATV Tie Downs - 1,200 lbs. (Qty 2)







Video of Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Erickson Tie Down Straps - Trailer - EM05729 Review

Today we're going to be taking a look at the Erickson motorcycle and ATV tie downs. Now, tie down straps are going to let you secure your motorcycle, dirt bike or ATV to your truck bed or trailer. One of the neatest features about these straps is that they feature this toothless, convenient and secure TCS tension and cam buckle system. This is designed to not cause any type of damage to the strap webbing. It's a really neat design. A traditional cam buckle has a serrated tooth design to it, and over time that can really cause some damage to the actual strap.

This one, however, does not use that. It's a locking cam system. It has this release lever here that's going to allow you to open it up. That's going to give you a lot of motion to adjust the strap as needed. Then you can move it to a locked position.

That not only protects the strap but that's also going to keep tension applied, that way it doesn't wiggle loose. You can still see that even within the locked position you can pull out the slack, or pull it tight, but it will not feed back the other way. In order to release the tension, or to get it to feed back the other way, press the release lever, open it up and then you can release the tension and adjust the strap as needed. It's a really nice, safe, secure cam style buckle. Again, the strap can be pulled to the desired length, yet it will not feed back through the buckle while in the locked position, and whenever you're ready to release the tension, just pull the release tab to loosen it up. Again, that's going to lock and stay in place.

Now, the cam buckle components are of metal or steel construction with protective finishing on them, so you don't have to worry about rust or corrosion. You'll notice that it has the S hooks, or the nice large opening hook on each end. Again, two straps are included with this part number, but you're going to have the hooks located on each end. These are steel hooks with that coating on them so that way they don't scratch or damage the anchor point. But on this end, I do want to point out that at the very end of the strap is a loop. What you can do is loop that around the hook and then what you've done there is you've just created a nice large loop, or anchor point, and that's going to be your soft tie.

This can be used to create a loop so that the hook doesn't scratch or damage an anchor point, like your handle bars or a tube on your ATV, dirt bike or motorcycle. When it comes to the dimensions of each strap, they measure one inch wide by six feet long. Each one features a maximum load or break strength of 1200 pounds with a safe working load limit of 400 pounds. Again, with this part number you're going to get a quantity of two tie down straps. Please keep in mind that tie down straps must be chosen according to their safe working load limit. The weight of the superior cargo must not exceed the combined working load limit of the straps that you're using. That's going to do it for today's look at the Erickson motor cycle and ATV tie downs.


Customer Reviews

Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 - EM05729

Average Customer Rating:  4.0 out of 5 stars   (21 Customer Reviews)

Secure your motorcycle or ATV to your truck or trailer with these tie-downs. Toothless cam buckles hold straps tight without damaging the webbing, and soft loops make it easy to attach the tie-downs to your bike. 1,200 lbs Max load.

- EM05729
by:

Wheels were what I expected. 726600



- EM05729
by:

I gave one of their representatives the tire size and told them that I have duel rotors on the front wheel of my motorcycle and want would be the best fit for a wheel chock. They gave me Item MT70271 and EMO5729. I had them express deliver so that I would have time to mount it on my trailer. It was a great, the easiest to assemble and mount and had plenty of clearance for the tire and rotors. It was simple who ever designed this item had a lot of thought put into it to work so well. Great help and product . Thank You again. Louie 655244



- EM05729
by:

Great price and great quality’n 451059


Comments

Great’

Bobby - 11/11/2018

45625

- EM05729
by:

work great easy to use bikes only, no cross over use 402417



- EM05729
by:

Fast service and excellent customer ser vice 366738



- EM05729
by:

Haven't used but looks good and ideal for carrying my motorcycle 324659



- EM05729
by:

Great, really like the soft tie built in for hauling dirtbikes. 257714



- EM05729
by:

Much like other recent reviews, I have had trouble with these straps. They come loose and I had to check and tighten them multiple times during transport. Now I have no confidence using them with my bike. I still use them for strapping down light gear on my trailer, but never with my motorcycle. 253746



- EM05729
by:

These are nice straps. I like the design of the soft loop. But the cam mechanism allows too much slippage, so they become loose when am driving on rough roads. My motorcycle weighs about 350 pounds, and I transport it on a trailer. Maybe the cam mechanism is strong enough for transporting a motorcycle in a pickup bed, but I am not able to use the straps with my motorcycle on the trailer. 252638



- EM05729
by:

Very good service. Appreciate that shipment was held because my mailing and shipping were very different. I was called to make sure the order was mine and everything was correct. Delivery was completed in less than a week. Thank you for your great service. 239552



- EM05729
by:

Ordered 3 products on a Wednesday and received them the following Tuesday which was great. All products, the 5' E track, tie-off rings and tie down straps were just what I needed. I was glad that the straps were rated a 1200 lbs rather than 400 lbs. Just bought a 6 X 12 enclosed trailer recently and will definitely be using Etrailer.com a lot more. 194574



- EM05729
by:

Great product. Works well with my TW200 174966



- EM05729
by:

Easy to tighten, easy to release... good strength too. 160073



- EM05729
by:

I want to like these but they fail to work. The cleat action is great yet they fail to hold. After I got the first pair they seemed a great product so I ordered a second pair and have since used them several times. Each time transporting a sport bike on a open trailer in a chock. Each time they worked loose in about 10 miles. I checked and rechecked mounting and closing. Still they fail to hold. This was in dry weather on smooth roads. I have had to stop multiple times on 40 mile trips to re-secure them. This seems to be all 4 of them and not just 1 out of the 4 failing. A bike carried along at the same using another brand strap remained solid. So simply, they fail. They are dangerous to use for securing as they cannot be trusted to hold. What can I do with them now? I am not sure I would even use them to secure a load/luggage on my touring bike Most likely I will throw them away as I can't trust them. It is a great design but the manufacturer needs to revisit the engineering and materials used to evolve the product or take them off the market. 151653



- EM05729
by:

Straps come lose within 15 minutes of travel. Completely unusable and dangerous. 129069



- EM05729
by:

Good product at a good price. Really like the "Soft Tie" feature. 94129



- EM05729
by:

Honestly I am surprised to see good reviews for these. I was VERY excited to order them thinking they would be a good mix of pull-down and ratchet straps. Soon after I got them I had to pick up a dirt bike. I compressed the front springs some, pulled the strap tight and then locked the buckle. Seemed to hold very nicely ... until I was less than a mile away and the bike was almost falling over!!! After stopping 3 different times to retighten the straps, I finally gave up and put my trusty ratchets back on and had no further problems. Manufacturer states that it is IMPOSSIBLE for the strap to loosen ... that is obviously not the case. I bought 3 sets and have yet to even open the other 2 sets due to this experience. The quality seems nice, but the function is just not there. They may work OK for none dynamic loads, but they sure did not do the job against my stiff bouncing motorcycle suspension. I think the problem is that the rods in the buckle have no texture to grip the strap like pull downs usually do. Add some texture to help grab the strap and I think these could be really great. 30718



- EM05729
by:

Satisfied with the product. The shipping time is outstanding... 13783



- EM05729
by:

Quick delivery! 10312



- EM05729
by:

Nice straps 9770



- EM05729
by:

Wowsers Just used these for the first time. Soooo much easier than regular tie downs with bar savers. I wish I had these ten years ago 5584


21
21

Ask the Experts about this Erickson Tie Down Straps

Do you have a question about this Tie Down Strap?


  • Recommended Trailer Hitch Receiver for Mazda 3 to Carry Motorcycle
  • For your 2014 Mazda 3 GT, there are only Class I trailer hitches available. The Class I trailer hitches are only capable of a 200 lb tongue weight, so you will not be able to use a motorcycle carrier like # UF48-979033 or similar you have pictured. You will need to use a trailer for your sport bike to haul behind your vehicle. My recommendation for your vehicle is to start with the Draw-Tite trailer hitch # 24912. Then use ball mount # 3593 and hitch ball # 19258. Then for your trailer...
    view full answer...

  • Will MaxxTow Adjustable Wheel Chock Fit 26 Inch Tire
  • The MaxxTow Adjustable Wheel Chock # MT70075 will fit a tire with a 26 inch diameter. The reason there is no maximum tire diameter is because there is a pivoting bracket that is adjustable with three different positions; when you put your bike into the chock you roll the wheel into the bracket and it will be held into place. It is likely you will need to have the bracket in the lowest position but it will work with your 26 inch tires. Keep in mind you will also need tie-downs such as...
    view full answer...

  • Recommended Wheel Chock and Tie-Down System to Secure 2017 Harley-Davidson Tri Glide Ultra
  • Yes. The MaxxTow Adjustable, Self-Locking Wheel Chock part # MT70271 for the front wheel will not work because the factory tire is 5.2 inches wide and that chock will only fit up to 5 inches. I recommend instead using the MaxxTow Adjustable Wheel Chock with Pivoting Bracket - 7-1/8" Wide Tires - Powder Coated Steel # MTMWC-01R. I recommend using the Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 # EM05729 to secure your bike in the wheel chock....
    view full answer...

  • Recommended Wheel Chock and Tie-Downs for Transporting a 2015 Suzuki Burgman 650
  • For your 2015 Suzuki Burgman 650, the wheel chock I recommend for your 21.6 inch diameter and 4.7 inch wide tire is the MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271. This wheel chock will hold your tire front and back nicely and doesn't have the side bars that could interfere with your dual rotors. This is the wheel chock I use personally and it is adjustable to meet your needs and also provides tie down eyelets for your straps to secure the...
    view full answer...

  • Effect of Using Hitch High/Low Adapter for Extra Ground Clearance with Hitch Cargo Carrier C18153
  • Use of an adapter like # BX88129 along with a hitch-mount cargo carrier like the Curt # C18153 will give you the height increase you want for better ground clearance but it will also have some unavoidable and undesirable side-effects. The first is reduction of your hitch's rated capacity by 50-percent. The loss of hitch weight capacity results from the adapter moving the actual load further away from the hitch tube. The further away that load is the more leverage it applies to the hitch...
    view full answer...

  • Wheel Chock for Transporting 2016 Suzuki Burgman Scooter in Ram Pickup
  • The MaxxTow Adjustable Wheel Chock # MT70075 is not an ideal fit for your 2016 Suzuki Burgman scooter due to the smaller 15-inch wheel size and dual brake rotors. A better fit for your Burgman is their Adjustable Self-Locking Wheel Chock # MT70271. This mounts in your truck bed like the MT70075 but it provides a wider stance for better stability and its design provides plenty of clearance for your rotors. It also includes tie-down points to allow use of tie down straps like # EM05729.
    view full answer...

  • Compatibility of Flat Towing Jeep Cherokee Trailhawk with Motorcycle Carrier for Scooter on Back
  • Putting a 200 lb scooter on the back of your Trailhawk is definitely not an issue when driving the vehicle, but needs to be considered in the towing weight of the vehicle when flat towing on all the components. Having a bike rack on your vehicle can cause some additional sway when towing, and having a motorized scooter could also cause some sway so you need to be aware of that possibility. Just make sure your trailer hitch receiver has a tongue weight rated for the combination of the...
    view full answer...

  • Recommended Hitch-Mounted Motorcycle Carrier For New Honda Ruckus
  • The hitch mounted carrier I recommend for your Honda Ruckus is the Ultra-Fab, part # UF48-979033. In my research I found the Ruckus weighs about 195 lbs and has a wheelbase right at 50 inches. The rear wheel measures just over 5 inches on the Ruckus. The # UF48-979033 will hold a motorcycle that weighs up to 500 lbs. The track on this carrier is 5 inches wide and 80 inches long. It also features a ramp. For added security I recommend a hitch receiver lock like part # e98882. This...
    view full answer...

  • Towing Recommendations with a Toyota Prius
  • When I researched the weight of your Vespa LX50 it exceeds the Class 1 hitch tongue weight that would be compatible with a cargo carrier. An alternative would be to tow your Vespa behind your vehicle using a utility trailer. Although Toyota doesn't recommend towing with your vehicle, if you choose to do it anyway here is an option I can offer you since the recommended towing weight on the hitch is higher. I would recommend the Draw-Tite brand hitch # 24847 and drawbar # 3593. We...
    view full answer...

  • Removable Wheel Chock Options For A Dresser Harley Davidson
  • I do have a few wheel chock options for you to consider however, none of which include a quick release function. For your Dresser Harley, I recommend using the MaxxTow Adjustable Wheel Chock with Pivoting Bracket part # MT70075 as this unit will fit wheels up to 5-1/2" wide in addition to a pivoting bracket for easy loading. I also recommend the Erickson Motorcycle and ATV Tie-Downs part # EM05729 to secure the bike. For an economical option, you could use the Rack'em Manufacturing...
    view full answer...

  • Can Wheel Chock MT70271 be Bolted to Plywood and Put in Trailer as Needed
  • My Dad used to have a wheel chock setup for his trailer that was two wheel chocks bolted to a larger piece of ply wood that he would set in his trailer when needed. He then used straps to secure the handlebars of the motorcycles to the trailer through eyelets that were bolted to the trailer frame. This worked well for him and would work well for you as well. The height of the front portion of the chock is 16 inches so you'd need to compare that to your fender height. The MaxxTow part...
    view full answer...

  • Wheel Chock Availability for a Honda Goldwing
  • The MaxxTow adjustable wheel chock # MT70075 does not have a weight capacity or a bike size limit. It is dependent on how it is mounted. For example if secured to a metal or solid wood floor using the proper fasteners for that material then it could handle a Honda Goldwing, no problem. With that said the chock will accept tires that are up to 5-1/2 inches wide so nothing larger than that would fit. Without knowing more info like the year of you Goldwing or seeing a picture of the...
    view full answer...

  • Recommended Motorcycle Chock and Tie Downs For Trailer
  • For your motorcycle, I recommend the MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271 to keep your bike in place...it is what I use. It gives you eyelets to attach straps to your bars if you want to secure your bike to the chock itself. For tie downs, you can use the Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 # EM05729 and # 06303. If you use the e-tracks, you may want the # E59143 or retractible...
    view full answer...

  • Hitch Recommendations for a 2007 Volkswagen Rabbit with a Dirt Bike
  • The hitches for your 2007 Volkswagen Rabbit have only 1-1/4 inch hitch openings and a 200 lb. tongue weight. Your dirt bike weighs more than that, so your options are limited but I have a solution that will work for you. Please note that you will always want to check your owners manual regarding any towing restrictions or limitations for your vehicle. An alternative to a hitch mounted carrier would be to tow your dirt bike behind your vehicle using a utility trailer. I would recommend...
    view full answer...

  • How to Carry a Motorcycle with a Toyota RAV4
  • I have a solution for you, but most hitch mounted motorcycle carriers require a hitch with a tongue weight capacity rated 500lbs or more. After doing a little research, I found that the tongue weight capacity of the base and sport models of the RAV4 is approximately 150 lbs and the tongue weight capacity of the limited model is approximately 350 lbs. I would not recommend using any hitch mounted motorcycle carrier on a 2006 Toyota RAV4 to carry your 325 lb bike because the vehicle cannot...
    view full answer...

  • Recommendation for Transporting 400 lb Motorcycle With 2012 Subaru Impreza WRX
  • The EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # 306-X7261 you asked from for your 2012 Subaru Impreza is not compatible with your 400 lb motorcycle with a carrier. This hitch is only rated for a max capacity of 200 lbs. That greatly surpasses the hitch weight capacity and doesn't even include the weight of the motorcycle carrier itself. Your best option would be to tow a small trailer like the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. For this you...
    view full answer...

  • Will Curt Hitch, # 31108, Fit On A 2007 Chevy 2500 HD And Hold A 250 Lb. Dirt Bike
  • The Curt Front Hitch, # 31108, has a 500 lbs. tongue weight capacity. The hitch will carry the 250 lb. dirt bike, but you will want to check what the front Gross Axle Weight Rating (GAWR) is on your 2007 Chevy 2500 HD. You will not want to exceed the Gross Axle Weight Rating for your vehicle. We have the MaxxTow MaxxHaul Aluminum Motorcycle Carrier for 2 Inch Hitches # MT70107, that has a 400 lbs. weight capacity. Also we have the Erickson Motorcycle Tie Downs, # EM05729. I am sending...
    view full answer...

  • Will the MaxxTow Wheel Chock # MT70075 Fit a 2009 Honda Metropolitan Scooter
  • The MaxxTow Wheel Chock, # MT70075, measures 12-7/8 inches at its tallest point. I do not think that this will interfere with the front part of your front fender, however, you may have some contact with the rear part of the front fender and the black cradle of the wheel chock. I made a video showing my concern about this wheel chock and your scooter. Instead, I recommend the Tow-Rax Wheel Chock, # TWSPWM this wheel chock will fit tires up to 6-1/2 inches wide and is only 8-1/2 inches...
    view full answer...

  • Availability of 2 inch Hitch Mounted Cargo Carrier that has a Ramp on the Driver Side
  • We do have a few options for you to have the ramp on the driver side of a hitch mount cargo carrier. I recommend going with the 32x48 Pro Series Steel Solo Cargo Carrier and Folding Ramp # PS10401-10402 as it has a 400 lbs weight capacity. It comes with a shank that fits 2 inch hitch receivers and a pin and clip to secure the shank. When you are assembling this cargo carrier you can simply rotate the basket part of the carrier 180 degrees before installing the shank when you are looking...
    view full answer...

  • Best Way Carry Dirt Bike With 2008 Jeep Compass
  • Although the Draw-Tite Class III # 75712 has a 525 lb tongue weight capacity, the capabilities of the hitch will be limited by the capabilities of the vehicle its installed on. If the vehicle manufacturers stated tongue weight capacity is lower than that of the hitch, you will need to abide by the lower rating. I cannot recommend exceeding Jeep's stated tongue weight capacity, as exceeding it could cause the attachment points between the vehicle and the hitch to fail. A better solution...
    view full answer...

  • What Motorcycle Frame Tube and Frame Width Do the B&W Biker Bar Motorcycle Tie-Down System Fit
  • The B&W Biker Bar Motorcycle Tie-Down Systems we carry are only designed to fit certain models of Harley-Davidson and have not been tested for other bikes like your Kawasaki Vulcans. It is possible they can work with your bikes if they have double tubes but you will need to know a couple of dimensions, the frame tube diameters and the frame width. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 requires a frame tube diameter of 1-1/8"...
    view full answer...

  • Front Hitch for 2006 Chevy Silverado to Transport Scooter
  • For a front hitch for your 2006 Chevy Silverado the Draw Tite part # 65028 is a confirmed fit that would work well. It has a 500 vertical weight capacity so it would be rated high enough for your Zuma 125, but there are a couple things you need to consider. This setup may end up blocking air flow to your radiator as well as blocking the front license plate. For a couple tie downs you would want the part # EM05729 as well. The # MT70101 you referenced would do well to carry your scooter.
    view full answer...

  • How To Use Stabilizing Straps On The Curt Hitch # 13703 Mounted On A Komfort Travel Trailer
  • The Curt Adjustable Width Trailer Hitch Receiver for RV, part # 13703, is designed to fit many frame styles on RVs and motorhomes. It can be attached to your travel trailer, but you will want to check with the trailer manufacturer to make sure your Komfort travel trailer can accept the maximum tongue weight of 350 lbs on this hitch. Since there will be significantly more bouncing at the rear of the travel trailer when it is being towed, the manufacturer (Curt) requires the use of stabilizing...
    view full answer...

  • Use of Curt Hitch Stabilizer Strap 18050 on Cedar Creek 5th Wheel Trailer
  • Curt's Hitch Stabilizer Strap # 18050 is required for use with some of their hitch receivers to support the hitch-mounted load which helps to reduce its motion as you drive. This helps prevent excessive stress on the receiver tube. The various Curt brand hitches suitable for installation on an RV are shown on the linked page. These include bumper-mount hitches like # E-100 and frame-mounted hitches like # 13703. For cases where there is not a handy spot to attach the strap to the...
    view full answer...

  • Using Motorcycle Carrier to Carry Dirt Bike on 2011 Hyundai Tucson
  • All of the hitch mounted motorcycle carriers we offer are compatible with a Class III receivers that have a 500 lb or better tongue weight capacity. A Class III receiver will typically have a tongue weight capacity (maximum amount of weight that can safely be suspended from hitch opening) of 350 lbs or greater and a receiver opening that measures 2 inches by 2 inches. A Class II receiver will have a lower tongue weight capacity, usually up to 300 lbs and a smaller 1-1/4 inch by 1-1/4 inch...
    view full answer...

  • Recommended Wheel Chock and Tie-Downs for Honda Trike in Toy Hauler Trailer
  • There are many manufacturers of Toy Haulers that have great products but Jayco, Forest River, and Keystone are probably the 3 that we see the most of with happy owners. Whenever you do settle on one, I recommend you use a MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271 to keep your trike positioned well when traveling. 1" x 18" Tie-Down Motorcycle Assist Straps # 06303 along with Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles...
    view full answer...

  • Will B&W Biker Bar Motorcycle Tie-Down System Work with Non-Harley Brand Motorcycles
  • The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 referenced in your question is designed specifically to mount to the dual round tube frame on the underside of the motor for the Harley-Davidson Touring and will not work for your Suzuki Intruder 1500 LC. While we don't have a similar system available for your Suzuki we do have a more universal tie-down system with MaxxTow Adjustable Wheel Chock # MT70271. This chock can simply be mounted to your trailer (or truck bed) floor and...
    view full answer...

  • Compatibiltiy of Front Mounted Trailer Hitch on 2008 GMC Sierra 3500 Dually Not Cab and Chassis
  • For your 2008 GMC Sierra 3500 dually, there are differences on many parts depending on if you have the cab and chassis frame or the Heavy Duty truck. There are also sometimes differences based on the SRW versus DRW on certain brackets for correct fit. It appears you are looking at the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65050 which is a fit for your 3500 Sierra Dually. It will require trimming and I've attached a photo to help with that. If you have a...
    view full answer...


Do you have a question about this Tie Down Strap?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality tie down straps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down strap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Leah B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.