Add a tie-down point to your truck or trailer with the Snap-Loc E-track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor welds onto your trailer or any smooth metal surface - wall, floor or ceiling. Works with all E-track accessories.
Features:
Specs:
Great for contractors, movers, motorcyclists and anyone who tows. The Snap-Loc weld-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies. Just weld the anchor onto any smooth metal surface in your trailer, truck or garage, and it's ready whenever you need to tie down a load. Mount the Snap-Loc anchor to the ceiling so you can secure ladders or other long loads above cargo that's on the floor.
E-track accessories, such as cargo straps and ring attachments (sold separately), snap securely into the anchor slot using a spring-loaded mechanism. Just pull back on the E-track attachment's lever, put the end into the slot, and then release the lever.
Use the anchor with a Loc-Ring (sold separately) to tie down equipment or large loads, secure your camping supplies, or trailer a motorcycle.
The Snap-Loc has a low profile, so it fits in places that other anchors don't - even on the side of your open tailgate. You can still close your tailgate as usual with the anchor installed. The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single E-track anchor can be installed upside down - your E-track accessories will still lock into it securely.
The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long E-track sections.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Snap-Loc E-Track style anchors. They're available in 4 different styles. This is our stainless steel version. That's part #SLSS. We have a zinc plated metal version. This is part #SLSZ.
We have an unfinished metal version. This is part #SLSU. And there is even a weld-on application available, part #SLSW. These anchor points are going to provide a great solution for our cargo management issues. As you can see any E-Track accessory is going to clip right into there giving us a good, secure anchor point for whatever it is that we need to store.
This is just a simple ring connection point. They've got straps. They've got bars that can run across. So, it's just a really good solution. These can be mounted just about anywhere as long as you get a good sturdy surface to screw it into or drill a hole, put a carriage bolt ...
these are square holes so you can but a carriage bolt right through there and bolt it right onto your trailer. As we said, there's a weld on application. It can be welded right onto the trailer or wherever else you want it during production and painted right over to match your finish. Again, the E-Track style, you just pull that lever toward you. Slide it up and then as you slide it down, that lever is going to click into position and it's going to hold that in place, no matter what.
I really like that for the straps because once the strap is in there, you don't have to worry about it coming unhooked. It's going to hold it's position until you can get over and make your other connection. You see we've got a connection made here on our 2 outside anchor points. We're just going to be securing a set of ramps here. Place them right into position. Then, it's just a matter of bringing one of our straps out. We can make our connection and snug it up. It's really all there is to it. This gives us a nice secure connection point that we'll not have to worry about. Again, available in 4 different styles. The "SLSS" is a stainless steel. The "SLSZ" is the zinc plated. The unfinished version, the "SLSU". And even the weld on application part #SLSW. .
Average Customer Rating: 4.9 out of 5 stars (252 Customer Reviews)
Add a tie-down point to your truck or trailer with the Snap-Loc E-track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor welds onto your trailer or any smooth metal surface - wall, floor or ceiling. Works with all E-track accessories.This is exactly what I have been looking for. I received today and will weld onto my flat bed utility trailer very soon. These will give me greater flexibility to attach my E-track snap on O Ring anchors and provide me with more secure tie down points. Super pleased here!
Nice anchors. The only issue I had was I needed to put a washer on the bold head because the square opening is so big. Not a big deal but something I didn't think about when I got these.
These are just the thing to bolt to your trailer. I bolted them to mine and am now a legend at the boat ramp. Genius they call me. Bungee cords are for chumps.
This is the third set of these I have bought. I install them in the tailgate jam of my pickups. Out of sight and out of mind until I need them to tie a load down that rides on the open tailgate. It’s a perfect place for a removable anchor point.
I needed to create a way to lift the camper shell off my truck so I bought four of these snap-loc singles and bolted them to each corner of the topper's roof through the fiberglass to a couple 2x4s on the underside. These anchors paired with a set of 4 ring tie down anchors that I bought separately and I've now got a very effective method of lifting the topper off the truck or tying light cargo to the roof of my truck.
I have 8 of these installed in the bed of my truck. I have had them about 1 year now and LOVE them, since they are low profile and rounded when not in use they stay out of the way, and wen you do need to tie something down you just snap in a etrack tie off ring or etrack accessory of choice and your ready to roll. The 6 in the bed of my truck are bolted down with the SLHCBDS-P anchor kit and are solid. The 2 in the tailgate are for very light duty, I plan to and recommend if you do the tailgate install to use the bolt SLHCBDS-P anchor kit.
Works great when only one tie down location point needed vs multi points
Excellent option for securing the 4 wheeler and other loads on my utility trailer. It was always a fight to get the straps in the right place until I bought these.
Great quality and thick construction. Ideal for mounting the spare tire E-track mount.
Works perfect and doesn't rust. I have them throughout my 2015 F150 truck bed.
Took forever to get here and not everything I ordered was even delivered. Part of my order was canceled I guess because they couldn't get it in stock. Would not purchase from this company again.
Be sure to order both parts to make up a very secure tie down that is removable when not in use.
Ordering was easy and shipping was quick. Will be using in our Cargo Trailer to Toy Hauler Conversion
delivered very quickly - Had to order 4 more etrack singles before I can install(poor counting on my part).
This new tie down system gives much more peace of mind when towing my ranger.
Fast shipping and great price. Although I haven’t hauled with it yet, it seems to be well made and better than traditional straps. I should have used all grade 8 hardware but that will have to wait for now. The hardware needed was 1/4” bolts. I used 2 1/2 “ length for my trailer that has standard 2x6 pressure treated lumber.
I'm a High School Band Director who uses a trailer to get instruments from performance venue to school and back. My previous trailer didn't have any E-track hardware and I just did the best we could. There was always a great deal of shifting of equipment during transport. Now that my current trailer has E-track hardware, I can secure all of my equipment easily and quickly reorganize the entire trailer according to the job's requirements. If you've not got E-track, get it. It's more than worth it's cost in saving of time and convenience.
So, here we are, one year later...... These things are great - We use these in an enclosed trailer for tying down equipment, motorcycles, and what seems like all of the relatives' furniture, at one time or another.
They're mounted on the walls and in corner areas with lag screws into the cross members and they're working very well.
The order was processed and sent out very quickly. Packaging was good and arrived in excellent condition. Product was just as described. I have a new aluminum trailer and did not want to install full lengths of E-track. These single
E-track units allow me to place them exactly where needed and keep the trailer nice looking. Thanks etrailer.com - good job.
After I placed my order. I received an confirmation email and when e-trailer realized that the Snap-Loc E-Track Anchors that I ordered were out of stock. I received a phone call informing me of this. Then the lady on the phone suggested other options of the same product that were in stock. She also let me know that the product I originally wanted would be in stock and ship by weeks end. But later that same day I received another phone call telling me that my product came in and had shipped.
After I had received my order in the mail I had some questions about what I had received. So a called the 1-800 number. Conveniently etrailer applied a sticker to the outside of my package that included the 1-800 number, order #, items ordered. This was Super Helpful. But the lady on the phone was able to pull up all my info from my phone # as soon as I called. She walked me thru my questions and also walked me thru the steps I would need to purchase the items that I forgot to order.
etrailer’s Attention to Customer Service and Customer Satisfaction is Top Notch.
Surprisingly stiff. Using these on a ramp truck using an 1/8" aluminum tread plate deck. There is a sizeable gap over the tires that I was afraid would flex when rolling a car over it. Using these tracks across that gap, I felt no flex when loading the car.
Consider me impressed. Had to make a couple custom holes to fit my framing, but nothing difficult at all to do.
These single brackets work great for mounting single items. I used this item for a spare tire mount inside my cargo trailer.
Purchased the Snap Lock E-track Tie Anchor. Very easy to install. Like the convenience of being able to slide lock and relocate for easy tie down. Highly recommend product.
Great product. Using these instead of a strip of e-track because it's much easier to install. Yes, I do lose versatility in attachment points but these cut my install time way down and I was able to get it done by myself rather than having a second set of hands. All of the e-track accessories fit and work perfect with this product.
Very handy anchor point for tie downs, hooks and other gear. I installed 4 of them on one side of my box trailer where I didn't want a whole e-track. Placed at each end of the trailer, these provide excellent support for large items. i installed mine with 1/4 sheet metal screws into the frame of my trailer, drilling a pilot hole with a 3/16" bit.
These brackets work great for spaces where I need to mount E-Track accessories, but don't need to have a length of E-Track mounted.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.