D-Ring Tie-Down Anchors for C-Channels on Let's Go Aero Trailers - Bolt On - 800 lbs - Qty 4

See what our Experts say about this Lets Go Aero Tie Down Anchors

• Could D-Ring Tie-Down Anchors, part # MMP543 Fit in Bed Rail Channel of Toyota Tacoma
  The width of the track nut that slides into a channel of the D-Ring Tie-Down Anchors, part # MMP543 is 3/4 inches. This is a very common size that works for roof rack channels so you'd need to check to see the width of your Tacoma's deck rail channel to see if it would fit.
  view full answer...
  
• Dimensions of the Block that Fits in the C-Channel for the D-Ring Tie-Down Anchors # MMP543
  I have attached a picture giving the dimensions of the block that comes with the D-Ring Tie-Down Anchors # MMP543 that will fit in your C-Channel. It measures 1-1/3" x 3/4" and is 1/4" thick. The threaded part of the bolt that comes with it is 1" long as well.
  view full answer...
  
• Will D-Ring Tie-Down Anchors MMP543 Fit C-Channel On 2016 Nissan Frontier Bed Rail
  The D-Ring Tie-Down Anchors, part # MMP543 are designed to fit the C-channel on Let's Go Aero Trailers and has not been test-fit on a 2016 Nissan Frontier. I went to the warehouse and took some measurements of the D-Ring for you and you can see if they will work with your truck. I have attached a photo of the D-Ring and noted the measurements you can check out to see if it will work in the C-channel on your Frontier. The block that fits inside the channel measures 1-1/3 inches long, 3/4...
  view full answer...
  
• Recommended Cargo Anchors and Tie-Down Straps for Lets Go Aero LittleGiant Trailer
  For your LittleGiant Trailer, I recommend the D-Ring Tie-Down Anchors for C-Channels on Let's Go Aero Trailers - Bolt On - 800 lbs - Qty 4 # MMP543 and ratchet straps like the Erickson Re-Tractable Ratchet Straps w/ Push-Button Releases - 1" x 10' - 400 lbs - Qty 4 # EM04418 or CargoBuckle Ratchet Tie-Down Straps w/ S-Hooks - 1" x 15' - 500 lbs - Qty 4 # IMF12636.
  view full answer...
• How Do The D-Ring Tie-Down Anchors for C-Channels on Lets Go Aero Trailers Install?
  I'm not 100% sure what you're referring to when you say "aero rails" but I think you're referring to the aero style roof rack bars like the Rhino Rack # RRVA150B-2 that have a channel mounting slot- in which case you would be correct. The D-Ring Tie Down Anchors # MMP543 are designed to mounted in any type of bar that has a "C" type channel. These specific rings were designed to fit snugly in the channels of Lets Go Aero utility trailers- they will fit in other applications that use rails...
  view full answer...
  
• Towing Recommendations with a Toyota Prius
  When I researched the weight of your Vespa LX50 it exceeds the Class 1 hitch tongue weight that would be compatible with a cargo carrier. An alternative would be to tow your Vespa behind your vehicle using a utility trailer. Although Toyota doesn't recommend towing with your vehicle, if you choose to do it anyway here is an option I can offer you since the recommended towing weight on the hitch is higher. I would recommend the Draw-Tite brand hitch # 24847 and drawbar # 3593. We offer...
  view full answer...
• Hitch Recommendations for a 2007 Volkswagen Rabbit with a Dirt Bike
  The hitches for your 2007 Volkswagen Rabbit have only 1-1/4 inch hitch openings and a 200 lb. tongue weight. Your dirt bike weighs more than that, so your options are limited but I have a solution that will work for you. Please note that you will always want to check your owners manual regarding any towing restrictions or limitations for your vehicle. An alternative to a hitch mounted carrier would be to tow your dirt bike behind your vehicle using a utility trailer. I would recommend...
  view full answer...
• Trailer Hitch Recommendations for 2014 Toyota Prius
  You'd first want to equip your Prius for towing by installing a trailer hitch. I'd recommend the Draw-Tite Class I trailer hitch, part # 24847. For a trailer wiring harness, use part # C56147. You'll also need a drawbar, part # 3594 and the appropriately sized trailer ball. For a 1-7/8 inch ball, use # 19256 or for a 2 inch ball, use # 19258. Keep in mind that Toyota didn't recommend using certain Prius model years for towing, so you'll want to consult your owner's manual for clarification. Part...
  view full answer...
• Hitch, Wiring, Cargo Bag Recommendations for Transporting Belongings with a 2009 Toyota Corolla
  Lots of great questions, I can help try to get you some answers. Let's start with the hitch for your vehicle. The one I recommend is the Draw-Tite # 24913. This has been determined that because of your vehicle's size to only support 200lbs tongue weight (cargo carrier) or 2,000lbs towing (trailer). I was able to find 150lbs tongue weight and 1,500lbs towing was your max page 171 of your owner's manual. This hitch must be torqued down to specifications so you will need to either purchase...
  view full answer...

Do you have a question about this Tie Down Anchor?