bing tracking image
  1. E-Track
  2. Erickson
  3. E-Track Rails
  4. Horizontal
  5. 5 Feet Long
  6. 2000 lbs
Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1

Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1

Item # E19148
lowest price pledge
Our Price: $37.21
You Save: 34%
Orders above $99 qualify for Free Shipping
Shipping Weight: 7 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
5' E-track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load. 1-800-940-8924 to order Erickson e-track part number E19148 or order online at Free expert support on all Erickson products. Guaranteed Lowest Price and Fastest Shipping for Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1. E-Track reviews from real customers.
  • All Info
  • Reviews (1087)
  • Q & A (0)
  • Photos
  • Why etrailer?

Erickson E-Track - E19148

  • E-Track Rails
  • Horizontal
  • 5 Feet Long
  • 2000 lbs
  • Erickson
  • 5 Inch Wide

5' E-track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.


  • E-track provides tie-down points for securing cargo in your trailer, truck, or van
    • For use with E-track straps and anchors (sold separately)
  • 5' section with multiple anchor slots is ideal for truck or trailer beds and enclosed trailer walls
  • Horizontal slots are designed for wall or floor mounting
  • 12-Gauge steel construction is zinc plated for corrosion resistance
  • Requires screws or rivets (not included) for bolt-on installation


  • Dimensions: 5' long x 5-1/8" wide x 7/16" tall
  • Safe working load limit (WLL): 2,000 lbs
  • Maximum load (break strength): 6,000 lbs
  • Diameter of mounting holes: 1/4"
  • Mounting hole spacing: 2"
  • 90-Day limited warranty

image showing dimensions of E-track
image showing dimensions of E-track


  • It is recommended that you use a backing plate (sold separately) every 12" for best results.
  • Use all mounting holes on this E-track for optimal installation.

19148 Erickson Manufacturing Horizontal Etrack Trailer Cargo Control - 5-Foot Piece

Customer Reviews

Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1 - E19148

Average Customer Rating:  4.9 out of 5 stars   (1087 Customer Reviews)

5' E-track with horizontal slots is perfect for installation in truck or trailer beds or on enclosed trailer walls. Multiple slots for securing E-track straps and tie-down anchors. Bolt-on installation (hardware not included). 6,000 lbs Max load.


As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.

Do you have installation instructions for the recessed mounting?
-- comment by: Rob H - 03/30/2014

I wondered the same thing when we first got his review. He mounted the e-track, then cut aditional pieces of plywood to fit between the e-tracks.

-- Etrailer Expert Patrick B - 4/1/2014


Good heavy duty metal but I wish the accessories you attach to the Etrack would be a little more snug it has to much play after locked into the track but it is secure.


Received on time and parts worked great for my trailer. Will Post another photo with the straps on the UTV.


The Erickson E-Track system has to be hands down the best tie-down solution. Use this in conjunction with the Basket Straps and you have a Worry Free Solution. We use it to tie-down our UTV/SXS and we can be assured that the machine will not move and the straps are as tight when we arrive as they were when we left. The confidence in this system makes the trip experience even better knowing you don't have to keep checking. We will put this on any trailer we purchase. You won't be disappointed in this. Be sure to use the E-Track Tie Down Rings!!!


Here are some photos of my 20’ trailer that I installed Horizontal E-track and use Hd 6k E-track D-rings

How do you attach you car? Straps on frame, wheel bonnets?
-- comment by: brad - 03/30/2015

If you look closely on the first photo you can see a yellow strap peeking out right behind the tool box, and at the tail end of the trailer. Andrew also mentioned that he used some heavy duty 6K E-Track D-Rings part # 59147
Erickson E-Track Tie Down Ring - 2,000 lbs

-- Etrailer Expert Rachael H - 5/5/2015


What can you say? Etrack is the industry standard for strength, ease of installation and mounting adaptability imo. We use etrack in all our trailers and wouldn't even think of owning a trailer without it. did a great job delivering our etrack (and other products) and customer service has been phenomenal in every aspect of the word. Highly recommended:-)

Off topic but what paint did you use inside your enclosed trailer? And, are you all using the backing plate underneath your trailers? If so... how long of bolts would I need to go through to mount the backing plate?Thanks in advance for any info!
-- comment by: Craig B - 11/03/2015


Here's some pictures of the E-Tracks installed on my utility trailer. I've installed them side to side so the load is carried by all the boards avoiding pull-up on a single board. The front and rear E-Track flange fits tightly under the steel flange of the trailer. I've secured the E-Tracks with lag bolts on the ends and middle for maximum pull-up resistance. The fasteners between the lag bolts are galvanized structural self tapping screws which have been wet set in the timber decking with gorilla glue for added strength. The dogs name is Cotton and he rates the E-Track cargo securing system as 5 Stars.

Thanks, Dave and Cotton!
-- Etrailer Expert Laura E - 01/30/2017


We use the E-Track for our race car trailer - it is strong enough to mount tire racks and hold loose items in place while on the road . . . excellent product


My installation used two 5' and two 2' sections. Along with two 4-slot pieces.
I removed the trailer bed planks and used my table saw to dado the spaces so the e-tracks are flush with the trailer bed. I used the backing plates (BPEZ) to secure the tracks.


Great product backed by great customer support. Together with appropriate straps that wrap over the tires, my Honda Pioneer 1000 now rides my trailer properly secured without harming the Honda's many drivetrain sensors that might eventually get damaged when the machine is strapped down any other way.


I used E-Track to organize my garage and they work great. I highly recommend and would buy this product again.


I recently purchased a 2012 Haulmark 6' x 12' cargo trailer.I knew I would need to have some type of interior system for fastening items. I originally was considering recessed tie rings, but when I located your web site I realized that the etrack was a superior method for securing loads. I researched several sources but ultimately decided to purchase from your company due to the clear and concise advice I found your web site. The installation video was also helpful. I also found the shipping incentive to factor into my decision. Items arrived very quickly and in good condition. Installation went smoothly and I was done in less than two hours.


Excellent product. Shipped in perfect state with no scratches or chips. I didn't expect the galvanized track to look as good as it does. If using to tie-down heavier items, be sure to order backing plates to add strength and rigidity.


Great products. Fast shipping.


Love my little trailer! I am a 67-year-old woman who Just drove it 8,000 miles on the Splash Trash Tour to Florida and it performed great. It was easy to pull and easy to see around. Backing up takes a little learning since the leverage is so small. Smaller trailers are harder to back up than the larger ones I was used to, but a few tries in a parking lot and you'll get it!


The E-track worked out well in our car hauler and love it since we don't have to put a strain on the suspension anymore. My wife helps me put the straps over the tires and then they lock in place. Nice set-up and a friend in the landscaping business like it also.

Works great. So glad I put it in the trailer and a worth while product.
Mike S - 02/24/2021


I bought two 5 foot sections of E-Track for a new cargo trailer. Installation was easy and straightforward. The product works great. It allows me to tie-in my musical equipment and keep it from sliding around in transit. It has really been a great addition to my new trailer!


Price was best online with free shipping. All the E Track I ordered came UPS in perfect condition. I was able to set up my cargo trailer exactly like I need it!


Great product and fast delivery. I got a little carried away with the number of proprietary ratchet straps, although they are extremely well made. Buy a ton of wood beam sockets and rings so you can use other lashing straps or bungee cords in some situations. I made my 24 foot enclosed car trailer into a moving van with E-Track at 2 foot and 4 foot heights on all of the walls. Thought about rails on the floor but figured I'd be blowing dirt out of them all the time. If you think your friends are annoying by borrowing your truck, you'd better keep your trailer a secret...


Probably overkill, but I put a 5-ft section on each side of our Aluma TK1 trike trailer. I also used 2 sections on the underside as a backing plate, since they come predrilled. The underside tracks will also come in handy if I ever have to carry a ton of plywood. I am pretty sure we will never overload the 6-k load limit on these babies.
etrailer online purchasing was simple, they shipped quickly, and the box was well-packed.


I have Erickson E-Track on all my ATV trailers. The product allows you to have a tie-down capability virtually anywhere on the floor of your trailer, or on enclosed trailers, many folks also install it on the walls to secure items. The E-Track material is very, very strong. Although over the years I've hit many potholes, dips in the road and other obstacles that have dislodged my tie-down straps from their anchors, but I've never had any E-track rail or tie-down come lose, stretch, bend, crack or other condition. It's a quality product that is made to last a lifetime! That's why I just ordered a another set for my newest trailer.

Thanks for the follow-up. All the products I purchased are performingwonderfully!
RONBO - 03/10/2016


System works great. I use it to tie down 2 dirt bikes and a quad in my enclosed trailer. It was easy to install. I put it on the floor as opposed to the wall simply because of my plans to install some other equipment on the walls.


I love these E tracks. I installed them on the floor and walls of my work trailer to stabilize equipment and materials while transporting. I highly recommend this product and E-Trailer for their great customer service, and informative installation videos!

Still working great even after a year long heavy use.
Art S - 04/08/2020


The tracks still look new a year later on a trailer stored outside. Makes it easy to find a tie down point anywhere along my trailer now. I got some longer through bolts to attach to the angle iron frame in addition to shorter lag bolts into the wood decking. Makes for a very secure tie down point for my UTV


Excellent system

Show More Reviews

Ask the Experts about this Erickson E-Track

  • Do the E-Track Cargo Control Systems Resist Corrosion
    The E-Track Trailer Cargo Control # E19148 that you referenced has a protective, galvanized finish that protects it from rust and corrosion. Under normal use you would not have to worry about rust or corrosion even with an open trailer it should resist corrosion for a very long time. But if the product experienced a lot of exposure to salt water over time I am sure that eventually it would begin to rust. I attached a couple pictures of this system installed on a couple trailers for you...
    view full answer...
    Image 1 for Image 2 for
  • Installing the E-Track Trailer Cargo Control on a 5th Wheel Toy Hauler with Rubber Flooring
    I spoke with my contact at Erickson and she said the E-Track Cargo Management System, # E19148, can be mounted on the floor of your fifth wheel toy hauler with rubber flooring. You will want to make sure that when you are screwing the track to the floor that you are using screws long enough to penetrate through the rubber flooring and through the wooden floor underneath and into the support members under the floor. The rubber flooring is not strong enough to secure a load. I have attached...
    view full answer...
  • Installing an E-Track Cargo Control to Secure a Harley Electra Glide in a Enclosed Trailer
    The method you described for installing the E-Track Trailer Cargo Control # E19148 should be sufficient, but if you really wanted to secure the tracks you could run wood screws through the holes into your plywood floor as well as the self tappers into the frame of your trailer.
    view full answer...
  • How Far Does the E-Track Trailer Cargo Control Track System Part # E19148 Stick Up When Mounted
    I pulled a section of the track off the shelf. Calipers say they are .430 inches thick or roughly 7/16 inch.
    view full answer...
  • Installation Tips for E-Track Trailer Cargo Control, # E19148
    Determining the mounting locations of your E-Track, part # E19148, will depend on the construction of your trailer and personal preference. If you are mounting the E-Track on the bed of your trailer, to tie down a car or similar item, you will need to determine the best position for the vehicle or item and the best situation for installing the E-Track. You may need to install bracing under the bed of the trailer to get enough mounting points for a secure installation. It sounds as if...
    view full answer...
  • Recessed E-Track Installation on Walls of an Enclosed Cargo Trailer
    Installing the E-Track system to your enclosed trailers upright frame is a good idea for the strongest mounting location and cutting the plywood out to fit around the E-Track would not be an issue that I can see as long as the plywood sides have enough mounting locations left to secure it safely in the trailer and the Accessories for the E-Track can be installed in the track. As far as how much the stress the trailer frame can handle, you would need to contact your trailer manufacturer...
    view full answer...
  • Installing E-Track on 1 Inch Thick Wood Floored Trailer
    A 1 inch think wood floor should be sufficient. I would use 3/4 long wood screws to provide some more gripping threads. I would use screws at least every other hole if not every hole, starting from the center and working to the ends to ensure the track lays flat. Use enough tension from the straps to hold the bikes securely, but do not over-tension them as you might blow our your fork seals.
    view full answer...
  • Do Horizontal E Track Installs Require Recessed Mounting
    You would not need to recess the installation of the E-Track Trailer Cargo Control # E19148 to mount it horizontally. If you really wanted to you could, but it definitely wouldn't be required and people install these without it all the time. I attached a picture of an E track system installed horizontally on a trailer without them having to be recess mounted.
    view full answer...
    Image 1 for
  • Best Direction To Attach Load When Using E-Track Cargo Control System
    For the E-Track Trailer Cargo Control to be able to reach it's full capacity, the direction of the pull should be parallel to the direction that the e track is installed. How much the capacity would be lowered by pulling the load perpendicular to the E-Track will depend on the weight of the load and the stress placed on the track. If the load is close to the capacity of the straps, pulling at a 90 degree angle could damage the track or the clip that locks the strap into the track.
    view full answer...
  • How Does the E-Track System Install to a Trailer
    The E-Track Trailer Cargo Control # E19148 can be secure by screws, rivets, or welding. If you went with screws to install this you would need to base the size of the screw on how thick the wood is you are attaching the track to. For example, if your trailer had 3/4 inch thick plywood you would want to use a 1/2 inch long wood screw. I would recommend using every other hole of the track for installing the tracks. Check out the video I attached to the right for more info.
    view full answer...
  • Corrosion Concerns When Installing E-Track On Aluminum Trailer
    I did some research online to find out what metals when in contact with each other promote corrosion. Surprisingly, zinc coated steel, like the E-Track Cargo Control track, part # E19148, and aluminum like your trailer would not promote corrosion nearly as fast as most metals when attached to one another per the nobility of metals chart I found online. As with any metals, the environment plays a major role in the corrosion between metals. If the materials are subjected to a lot of salt...
    view full answer...
  • Fastening E-Track to the Sides of an Enclosed Trailer
    The screw holes on the E-Tracks are 1/4 inch in diameter and the E-Tracks are made of galvanized steel. Erickson does not recommend a specific type of fastener, so you can use any type of steel fastener, screw or bolt, that you wish. If you choose to use screws, be sure the underside of the head is flat and not curved so it sits flush on the E-Track. I also recommend using screws long enough to pass through the plywood and into the support beams where you can. This will provide the best...
    view full answer...
  • Can E-Track be Flush or Recess Mounted Instead of Surface Mounted
    There aren't specific instructions for flush mounting E-track such as # E19148 but as long as the openings on top are clear and there is space enough below the holes to insert/remove accessories then it can be flush mounted or recessed some. It is pretty versatile stuff.
    view full answer...
  • What Is The Recommendation For Welding Erickson E-Track System
    The typical installation of the Erickson Horizontal E-Track, part # E19148 is by installing bolts or screws through the mounting holes on the track system. It can be welded, but specific precautions should be used when doing so as this is a zinc-coated steel and welding produces dangerous fumes. It should always be done in a ventilated area. In my research I found that the zinc coating has a lower melting point at 1,600 degrees F versus steel at 2,800 degrees F, and if not removed before...
    view full answer...
  • Can Erickson E-Track Be Cut to Needed Length for Trailer
    The Erickson Horizontal E-Track # E19148 can be cut to length for your application. We suggest using a metal saw or cutting wheel and grinder to cut the tracks to the needed length.
    view full answer...
  • Can E Tracks Have Accessories that Pull to the Sides
    In order to achieve the full capacity of the etrack the direction of pull should be parallel to the direction that the etrack is running. How much the capacity would be diminished by pulling 90 degrees to the side will depend a lot on the weight of the load. If the weight is close to the capacity you would run the risk of damaging the clips of the attachments used.
    view full answer...
  • Can a Zero-Turn Mower Drive Over E-Track Installed on Trailer Floor
    The E-tracks like the part # E19148 are very sturdy. This piece has a 6k capacity so your mower riding over them would not be an issue at all. Your trailer floor would give out long before the E-track would get damaged.
    view full answer...
  • Can E Track be Used in a 5 foot by 10 foot Cargo Trailer
    The 5 foot section of E-Track part # E19148 would work well in a 5 foot by 10 foot cargo trailer like what you have. Check out the install and review video I attached that shows this track being used in a similar cargo trailer.
    view full answer...
  • How to Pick the Height for Installing E-Track on a Trailer Wall
    The height of where you install the E-track will depend greatly on where it will work best for the cargo you plan to tow. Most people put it around half way up or lower. But once again that will just depend on where it will work the best for you. You might take the sections out into the trailer with the cargo you plan to carry and see where it would work the best.
    view full answer...
  • Recommendation for Installing Erickson E-Track System on Aluminum Trailer
    When installing the Erickson Horizontal E-Track # E19148 to the floor of your aluminum trailer, the amount and type of fasteners you use will depend on the particular structure of the floor. If you are able to use the wood planks for mounting the system, there will be enough floor structure for the fasteners to securely attach to. Erickson states that you should use no less than 2 fasteners per linear foot per side. For this application, going with the minimum will be sufficient. If you...
    view full answer...
  • Is E-Track # E19148 Designed to be Flush Mounted
    The E-Track part # E19148 that you referenced is not designed for a recess mount although if you wanted to come up with a way to do that you certainly could. There aren't specific instructions for flush mounting E-track such as # E19148 but as long as the openings on top are clear and there is space enough below the holes to insert/remove accessories then it can be flush mounted or recessed some. It is pretty versatile stuff. I attached a picture of the track installed as well as an install...
    view full answer...
  • Where to Put E-Track in Motorcycle Trailer
    E-Track such as the Erickson Horizontal E-Track # E19148 can be used in any way that allows you to mount your pair of motorcycles. As you can see in some of the photos I've added, there is not a set way to add the track. You will need to take measurements to ensure your bikes fit and position the track accordingly. I've added a link to our selection of e-track for you to find what works best for you, as well as the accompanying parts you'll need such as backing plates.
    view full answer...
    Image 1 for Image 2 for
  • Are E-Tracks that are Zinc Coated Steel Resistant to Rust
    Zinc coated steel is the only e-tracks we carry, like part # E19148. Unfortunately, we don't carry stainless steel. However, the zinc coating is designed to resist rust and corrosion as well. And these have been used on trailers that leave them exposed the elements and they still get great reviews
    view full answer...
  • E-Track for 2017 Mercedes-Benz Sprinter 2500
    We do have e-track available and you could add the Erickson Horizontal E-Track if you are comfortable bolting it into your 2017 Mercedes Sprinter 2500. We do not have any that measure 14' long so I recommend instead using 6 of the 5' long Erickson Horizontal E-Track # E19148 to get a pair of 15' tracks which you can cut down to 14'. I've added links to video reviews of this track as well as a link to each of our available e-track systems for you to check out.
    view full answer...

< Previous
123. . .11

Do you have a question about this E-Track?

  • Why

    At we guarantee:
  • Highest quality e-track for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate e-track information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Chelsea B
Updated by:
Chelsea B
Employee Mary E
Updated by:
Mary E
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.