View Cart
Erickson E-Track Tie Down Ring - 1,200 lbs

Erickson E-Track Tie Down Ring - 1,200 lbs

Item # 59131

lowest price pledge

Retail:$12.45

Our Price: $5.34

You Save: 57%
Tie Down Anchors

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.3 lbs

Quantity: 
In Stock, Ships Today
Erickson E-Track Tie Down Ring - 1,200 lbs 1200 lbs 59131
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • E-Track Parts
  • E-Track Anchor
  • Trailer Tie-Down Anchors
  • Track Systems and Anchors
  • 1200 lbs
  • Erickson
Attaches anywhere along e-track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure. Lowest Prices for the best tie down anchors from Erickson. Erickson E-Track Tie Down Ring - 1,200 lbs part number 59131 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (263)
  • Q & A (26)
  • Videos (2)
  • Photos
  • Why etrailer?

Erickson Tie Down Anchors - 59131

Attaches anywhere along e-track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure.


Features:

  • Tie-off Ring
  • 4,000 lbs Capacity
    • Safe Working Load Limit: 1,200 lbs
  • Color may vary
  • Not compatible with Snap-Loc E-Track Tie-Down Anchors


Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.



59131 Erickson E-Track Tie-Off Ring - 4,000 lbs







Video of Erickson E-Track Tie Down Ring - 1,200 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Erickson Tie Down Anchors - Trailer Tie-Down Anchors - 59131 Review

Today we are going to show you part number 59131 from Erikson. This is a part to our E-Track. This is an E-Track D-Ring which is rated at 4,000 pounds. It will fit on all traditional E-Track systems. We will go ahead and show you how it works. All you do is pull this little tab back and it snaps into place then you can tie off what you want to it. You can even attach a regular tie down to it. That is it for part number 59131 from Erikson the 4,000 pound D-Ring.


Customer Reviews

Erickson E-Track Tie Down Ring - 1,200 lbs - 59131

Average Customer Rating:  4.9 out of 5 stars   (263 Customer Reviews)

Attaches anywhere along e-track to provide a tie-down point where you need it. Push-button design makes it easy to move and secure.

- 59131
by:

Purchasing experience was outstanding. Order placed on Monday March 26 and received on March 27. Noah was very helpful and great to work with. Shipment came in 2 packages and was complete. I would highly recommend etrailer.com for purchasing your towing needs. This was the second time I have ordered from etrailer.com and both times they have exceeded expectations. 490435



- 59131
by:

I've used these Erickson E-Track tie-off rings for many years in all my other trailers. I bought a new trailer and therefore, needed new tie-off rings. These units are the lighter version of ring available from Erickson and I've used both types to secure my ATVs. I've never had any problem with either tie-down. These units are plenty strong enough to hold any ATV, motorcycle. In fact, I've hit terrible potholes and other obstacles with my trailers over the years, that I've had ATV's pop the tie-down straps off. However, no matter how hard the jolt, I've never had one of these Erickson rings pull lose, bend, crack, or any other malfunction. In addition, they are super easy to remove, reposition, attach etc. They lock into position as soon as they are fully inserted into the E-tracks sytem. 176069


Comments

Thanks for the follow-up. All the products I purchased are performingwonderfully!

RONBO - 03/10/2016

17060

- 59131
by:

As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer. 110015



- 59131
by:

Let me just start by saying I Love etrack! These tie off rings make loading the truck and trailers quick and easy. I even installed a couple on the side of my tailgate so i could strap down longer items when tailgate is open. (Dont forget to remove the ring when done and closing tailgate) 111160



- 59131
by:

Perfect tie down for my toy hauler. Very secure when I need it...virtually gone when I don't!! 683380



- 59131
by:

Excellent! 672652



- 59131
by:

Works as described. 652119



- 59131
by:

Fit good inside the track I bought, good pricing too. 647378



- 59131
by:

Adding these E Tracks to a second utility trailer. These are fantastic quality and are indispensable! They dramatically increase the functionality of any trailer! 636747



- 59131
by:

They work well. These are light duty. I wish I had sprung for the heavy duty ones. 619130



- 59131
by:

Yes I did receive the order and it was exactly what I needed. I installed the e-track on my trailer and hauled my bike to Florida. It worked great and I didn’t have to worry about the tie downs coming loose. Thanks 610953



- 59131
by:

VERY EASY TO INSTALL, SEEMS TO WORK FINE. COULD NOT BEAT THE PRICE 610394



- 59131
by:

You can never have too many of these. 605748



- 59131
by:

Awsome anchors very easy to use. Shipping was fast and a great company to deal with Thanks 583432



- 59131
by:

Got the product quickly and it appears to be exactly what I need. Thank you! 552078



- 59131
by:

Great option for tie downs. Move them where I need them and use a number of them to ensure the load doesn't shift. Great product. 520836



- 59131
by:

The items that I ordered were exactly what I wanted and have positive remarks from individuals that have used them. The ease of use is fantastic, 505194



- 59131
by:

The product makes adjusting tie down points a breeze. 501639



- 59131
by:

Got exactly what I wanted, with no hass le! 501532



- 59131
by:

Currently use these to attach tie-down straps when hauling partial loads. also came in handy to hold a closet pole for my hanging clothes when I moved. 495069



- 59131
by:

The thing's that I order were right , from coupler lock to lighting, tie down rings it even got here a day sooner than they said it would . that works for me. 487737



- 59131
by:

Not much to say other than they work gr eat. 483541



- 59131
by:

no issues 481194



- 59131
by:

Top quality 479629



- 59131
by:

Tie downs was as described worked perfe ct 477576


Comments

Working good

Nick M - 02/21/2019

49725

- 59131
by:

The website and service are second to none. I had a question about which product to use and within a couple of hours etrailer had an expert reply, creating a web page with detailed information and links to suggested solutions. Also a photo of the guy who wrote it and his name and email address in case I needed more help. I went ahead and ordered and well within the promised time the box arrived. To me this is the standard by which all other online retailers should be compared. Whenever I need anything they sell, etrailer is the place I will return for more purchases. I couldn't be happier with the company. 475643



- 59131
by:

I am pleased with quality, value, and p erformance. 463356



- 59131
by:

Good enough product that arrived in time. I'd order again. 462908



- 59131
by:

Great product. Thanks 462613



- 59131
by:

Very satisfied with all aspects of ordering, quick delivery, very timely customer service , items being the right ones, and being a perfect fit for quick installation. 450450



- 59131
by:

product is exactly what we need for our needs and on top of the ease of ordering we received the order a day earlier than expected. 449671



- 59131
by:

Does a good job of keeping my harley in place and scratch free and has done well on rescue missions for other bikes no signs of wear or fraying after a year 448947



- 59131
by:

All e-track are great with a very reasonable fair price Thanks Mel 442394



- 59131
by:

Well made and easy to use. 440637



- 59131
by:

Did you know these will fit in the back of your Ford Pickup if you have BOXLINK. 432680



- 59131
by:

Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products ! 420962



- 59131
by:

Great service and products. 416722



- 59131
by:

Have not had a chance to use them yet - looks like they will work fine. 413579



- 59131
by:

It work find 411265



- 59131
by:

bought these to go with my e tracks for my bike trailer. Love the versatility. 408386



- 59131
by:

Perfect for strapping down anything in your trailer with easy tracks 407657


Comments

Still working like day 1.

Doug l - 07/18/2018

41127

- 59131
by:

We are using these e-track tie-down rings in an enclosed trailer - to (mostly) tie down large motorcycles. These were actually ordered by mistake. I almost always go way over and above and get the heaviest-duty hardware available..... but am pleasantly surprised at the quality, fit, and finish on these tie down rings. 392172



- 59131
by:

Couldn't be happier I have Three trailers and all three I've installed the etrack. So nice!!! 381982



- 59131
by:

Well constructed and the ring itself is strong. The clip works well. 379794



- 59131
by:

My whole order came in quick and all seems to be great quality. Can't wait to get everything installed 378590



- 59131
by:

Everything was there. It looks good to me. Thank you very much, it was a real pleasure doing business with you. John Korn 377255



- 59131
by:

Worked great 373973



- 59131
by:

These work perfectly for what I needed. Very flexible and the price is right. 372007



- 59131
by:

Great product very heavy duty. Price was good and you can't beat free shipping. 369828



- 59131
by:

Works for what I need 368118


55
270
Show More Reviews

Ask the Experts about this Erickson Tie Down Anchors

Do you have a question about this Tie Down Anchor?


  • Mounting Suggestion For E-track To Aluminum Utility Trailer
  • For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 8' Long - Qty 1 # E19135 along with the E-Track Backing Plate - Zinc Plated Steel - 6-1/2" Long x 6" Wide # BPEZ. This will save you the expense of the dual track and will allow you the flexibility of plates between the braces or around them. This track also comes in 5 foot sections # E19148, 4 foot # EM19147, and 2 foot # EM59150. I recommend using the E-Track Plastic End...
    view full answer...

  • Using E-Track and Accessories in a 5 x10 Enclosed Trailer to Carry a Harley or an ATV
  • In order to secure either a motorcycle or ATV I recommend 2 sections of E-Track # E19135 so that you can have one on either side of the motorcycle. This will be the most stable set up for the bike. The ATV really only needs to use one of the tracks to be secured using a wheel net with E-Track fittings, # 77314. For the motorcycle I recommend using at least 2 of D-ring # 59131, assist straps # 06303, and some ratchet straps such as # 34414. I have included some links to videos on these...
    view full answer...

  • E-Track and Motorcycle Wheel Chock Recommendation for Securing Motorcycle to Trailer
  • That sounds like a great plan, the E-Track part # E19148 will provide a great tie-down point for securing the motorcycles. Since this part number is for a 5 foot section you would be better off getting an 8 foot section like part # E19135, and then trimming it down to the right size. For tie-down rings you would want the # 59131 and then for a wheel chock I would recommend the # MT70075 because of how well it secures motorcycle and how easy it is to use. Check out the review video I...
    view full answer...

  • How Does Etrailer Slot and Anchor Typically Install on Truck Tailgate
  • Sounds like you are talking about using a single E-Track slot like part # SLSB to instal the Erickson E-Track Tie Down Ring # 59131 in a tailgate application like the picture we recieved from a customer who did the same. There isn't an exact recommended way to accompolish this. It looks like the picture you referenced has a tailgate that has an internal panel that can be removed so that the customer could use nuts and bolts to hold the slot to the side of the tailgate. We don't have exactly...
    view full answer...

  • Tie Downs and E-Track Recommendation for Securing a BMW K1200, ATV, and Dirt Bike on a Trailer
  • I would recommend using 2 sections of Horizontal E-Track, # E19148, down each side and 2 sections of Horizontal E-Track down the middle of your trailer, 6 sections in all, to give you as many tie down options as possible for securing all of your different toys. Your BMW K1200 sounds like the heaviest item you will need to tie down. I recommend using 2 packages of the Retractable Ratchet Straps, # 34414, along with 4 of the E-Track Tie-Off Rings, # 59131. Four tie down points are needed...
    view full answer...

  • Where to Install E-Tracks in Enclosed Trailer Carrying Polaris ATV and Motorcycles
  • Since you will be using your E-Track system, part # E19148, for transporting more than one type of vehicle, you will want to try to find mounting locations that will work for all of them. The main consideration for deciding where to mount the E-Tracks is to select locations that provide access to structural components, such as wall studs and floor supports. These structural elements of your trailer will serve as the backbone of your E-Track system. It is important that the tracks mount...
    view full answer...

  • E-Track Recommendations For 7 By 14 Enclosed Trailer To Carry Classic Motorcycles
  • With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I recommend you make sure they are secured either to the metal structure of the trailer or use metal plates like the E-Track Backing Plate, part # BPEZ, to make it as secure as possible. If the interior floor and walls are 7 ft long I recommend 5...
    view full answer...

  • E-Track Recommendation for Securing ATV to Utility Trailer
  • E-track can easily attach to the wood floor you have in your open utility trailer. This is a very common style of trailer that is used with the E-tracks. I attached a couple review videos that show etracks installed in a similar trailer as yours and what they use to secure the cargo. The etrack sections like the part # E19148 would be more than adequate to secure your ATV. The # 59131 is a great anchor to use, or if you want a strap that attaches directly to the etrack we have the...
    view full answer...

  • Can the Erikson E-Track System Be Used In An Aluminum Utility Trailer
  • The Erickson E-Track system will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals. This layer can consist of almost any material, such as wood, rubber, or plastic. When installing the E-Track system in a trailer, one thing to keep in mind is to select locations that provide structural components, such as wall studs and floor...
    view full answer...

  • Length of Buyers Products Super Track Kit
  • The Buyers Products Super Track Kit # 337ST93 only comes in a length of 46-1/2 inches, or just under 4 feet. There is a 5 foot length of E-Track, the Brophy Horizontal E-Track # ET05 which will allow you to use the Erickson E-Track Tie Down Ring # 59131. I have added a link to a video review of the Buyers Products Track Kit for you to take a look at.
    view full answer...

  • Recommended Erickson E-Track System for Transporting Motorcycle in Enclosed Trailer
  • Installing the Erickson Horizontal E-Track # E19135 in your enclosed trailer is an excellent idea. Along with securing your motorcycle into place, the E-Tracks will provide great versatility to tie down various other cargo items in your trailer. For your motorcycle, I recommend installing the tracks on either side of the motorcycle to provide multiple tie-down points in order to keep it secure. Then you can use the Erickson E-Track Tie Down Rings # 59131 along with D-Ring Straps # E59143...
    view full answer...

  • E-Track Recommendation to Secure 4 Motorcycles in an Enclosed Trailer
  • You would be more than okay to run two tie downs off of one the E-Track Tie-Off Ring part # 59131 that you referenced. Each of these has a 4,000 lb capacity which would be more than enough for what you are doing. Your plan to use 9 of the E-Tracks # EM59150 with the # 59131 like the drawing you sent in would work perfectly. For backing plates you could use the part # BPEZ. I attached an install video for the E-track for you to check out as well.
    view full answer...

  • Hardware Recommendation for Securing E Tracks to Plywood Trailer Floor
  • Securing the Erickson E-Track # E19148 to 3/4 inch plywood should be sufficient. To secure the track to the plywood, you can use screws, or rivets. Using 1/2 inch screws would be a good length with 3/4 inch plywood. You will want to attach screws at least every other mounting hole. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2 inch D-Ring, part # E59143. Also available is the Erickson E-Track Strap with Ratchet, part # EM59136.
    view full answer...

  • Single E-Track Anchor for E-Track Tie-Off Ring # 59131
  • In the picture, the customer is using the Erickson tie-off ring # 59131 with single E-track anchor, # SLSB. There is also a stainless model, # SLSS, and a zinc model, # SLSZ. If you want one you can paint yourself there is also an unfinished model, # SLSU. I have linked a couple of videos to the right for you. There are all kinds of E-track accessories that could be used in the anchors. I have also included a link with the accessories, anchors, and tracks for you.
    view full answer...

  • Compatibility of Erickson ATV E-Track Tie-Down Kit EM09160 with Brophy Backing Plate BPEZ
  • Erickson E-Track fittings like the Tie Down Ring # 59131 will work just fine in their ATV E-Track Tie-Down Kit # EM09160. Please note you will supply appropriate installation hardware for the ATV kit based on the requirements of the mounting surface where you will install it. The four outside holes on the Brophy plate # BPEZ do generally align with the mounting holes on the ATV kit but we have found that it may sometimes be necessary to enlarge two of them to get the best fit. Just a...
    view full answer...

  • Recommendations for Carrying 5 or 6 Bikes on a 5 ft by 8 ft Trailer
  • To carry five or six bikes in your trailer, I would recommend picking up five or six Yakima BlockHead truck bed bike mounts, # Y01117. These bike mounts can mount to the side rails or floor if you have an open utility trailer or they can mount to the walls or floor if you have an enclosed trailer. The fork mount design allows you to mount multiple style and sizes of bikes on the same mount. You could also take a different route and install a cargo control system like the E-Track, #...
    view full answer...

  • Using The E-Track Trailer Cargo Control # EM59150 On Trailer To Secure ATVs and Motorcycles
  • Installing the E-Track Trailer Cargo Control, part # EM59150, would work well to strap down your ATVs and motorcycles on your V-nose trailer. You could mount the E-Track sideways or perpendicular to the trailer frame over the floor as you described. The E-Track can also be mounted on the wall of trailers, so perhaps you could mount the track for the ATVs on the floor towards the front of the trailer. Then you could mount track on the trailer walls for the motorcycles or on the floor...
    view full answer...

  • E-Track Recommendation for Installing on the Inside of a Carson Fun Runner Toy Hauler
  • Sounds like a good plan. For the 5 foot sections of the E-track you would want part # E19148. The # EM59150 that you referenced is sold in 2 foot sections. You might also be interested in the E-Track Tie-Off Ring # 59131, E-Track Wood Beam Socket # 59149, and E-Track 2" D-Ring part # E59143.
    view full answer...

  • E Track Placement Recommendation for Motorcycle Trailer
  • Basically you'll have to mock up where you want the motorcycle to be and where the best place will be for the e-track as there isn't a set place to install the tracks in every trailer. Typically you want the tie down anchors to be about 36 inches apart from each other to get the best angle for them to pull down. For tie down anchors that fit in the e-track slots we have the part # 59131 which would fit and work well. Then for a set of ratchet straps the Erickson kit part # EM31353 would...
    view full answer...

  • Is it Possible for E-Track and Snowmobile Carbides to Scratch Each Other
  • From what I understand about snowmobiles, and please correct me if I am wrong because I have little knowledge on them, the carbides are the part the skis attach to. Is that correct? I am not sure how the E-track or the carbides would come into contact with each other. But if they did then it would be possible for one to scratch the other. To avoid that you could use 3 lengths of tracks; one on the far left side and one on the far right with one in the center between the snowmobiles...
    view full answer...

  • Spare Tire Carrier and Cargo Control Tie Downs for 5 x 8 Enclosed Trailer
  • The various spare tire carriers for trailers that we offer are shown on the linked page. Their fit with your spare is based on the wheel bolt pattern not the actual tire size. We also have different types of carriers including hitch-mount, bumper-mount, frame-mount and carriers with height lift which will increase ground clearance. For example, if you have a 3 x 4-inch trailer frame and your wheels are 4- or 5-lug types you could use the Fulton # FSTC1000301. If you have a 4-inch...
    view full answer...

  • Cargo Solutions for a 7 x 16-Foot Enclosed Trailer
  • Erickson's E-Track Cargo Control systems offer excellent flexibility at a moderate cost. Their E-Tracks are offered in several lengths, such as a 5-foot # E19148 for horizontal applications. Many types of accessories are offered as well, including tie-off rings like # 59131, D-rings like # E59143 and ratchet straps like # EM59136. I have included links for both E-Track items as well as some interior trailer cargo control items.
    view full answer...

  • Is Erickson E-Track Trailer Cargo Control Available With Galvanized Mounting Base
  • It is possible that the galvanized plate is a custom job, it could be part of the cargo truck, or the track was already installed in the truck from the manufacturer. The item you selected, Erickson E-Track Trailer Cargo Control, part # EM59150 is zinc plated. The E-Track can be mounted using screws, or rivets. If using screws, I would use a stronger grade screw like sheet metal screws. For tie downs and straps I would recommend either the E-Track Tie-Off Ring # 59131, or E-Track 2...
    view full answer...

  • Would 8 of the Erickson Tie Down Anchors 59131 Have Weight Capacity for 1,200 UTV
  • Each of the Erickson E-Track Tie Down Rings part # 59131 have a 1,200 lb capacity. With several of these your 1,200 lb Wolverine would be secured well.
    view full answer...

  • Length and Width of E-Track Tie Down Anchors 59131 and 59147
  • I went and pulled both the part # 59131 and # 59147 from our warehouse to get the dimensions you requested. The width of both measures 7/16 inch. The overall length of the part # 59131 where it clips down into the e-track is 2-13/16 inches. That portion of the # 59147 measure 2-3/4 inches.
    view full answer...

  • Ratcheting Strap that Works Like Highland # 1154000 But as an E-Track Mounting End
  • I do have a couple of options for you but they are not exactly the set up you have asked about. What you could do is use the ratcheting strap you want, # 1154000, and then use an E-Track tie off ring # 59131 and hook onto it with one end of the strap. Another option is a strap like # EM59136. It is not the same ratcheting style as the other strap but it does have E-track ends on the straps. And the third option is to take the Erickson strap, # EM59136, remove the ratchet part from...
    view full answer...


Do you have a question about this Tie Down Anchor?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality tie down anchors for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down anchor information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Jackie C
Expert Research:
Jameson C
Video Edited:
Dustin K
Installed by:
Cole B
Photos by:
Zach O
Updated by:
Jacob W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924