1. Tie Down Anchors
  2. Curt
  3. 2 x 4 Stake Pocket
  4. Stake Pockets
  5. Trailer Tie-Down Anchors
  6. Truck Tie-Down Anchors
Curt Stake Pocket for Flatbed Trucks or Trailers - Weld On - Qty 1

Curt Stake Pocket for Flatbed Trucks or Trailers - Weld On - Qty 1

Item # C83072
lowest price pledge
Retail:$6.95
Our Price: $4.28
You Save: 38%
Tie Down Anchors
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.09 lbs
Quantity: 
In Stock
C83072 - Stake Pockets Curt Tie Down Anchors
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Weld-on stake pocket installs on your utility trailer or flatbed truck. It is designed to hold a 2x4 stake so that you can build a sidewall to help keep cargo contained. Lowest Prices for the best tie down anchors from Curt. Curt Stake Pocket for Flatbed Trucks or Trailers - Weld On - Qty 1 part number C83072 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (41)
  • Q & A (5)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Tie Down Anchors - C83072

  • 2 x 4 Stake Pocket
  • Stake Pockets
  • Trailer Tie-Down Anchors
  • Truck Tie-Down Anchors
  • Curt

Weld-on stake pocket installs on your utility trailer or flatbed truck. It is designed to hold a 2x4 stake so that you can build a sidewall to help keep cargo contained.


Features:

  • Heavy-duty bracket attaches to your flatbed truck or utility trailer to create 1 stake pocket
    • Supports a 2x4 stake
    • Can also be used as a tie-down point for cargo straps and binder chains
  • Weld-on installation
  • Sturdy steel construction
  • Assembled in the USA


Specs:

  • Application: utility trailers and flatbed trucks
  • Exterior dimensions: 4-1/8" long x 1-7/8" wide x 3" tall
  • Interior dimensions: 3-3/4" long x 1-5/8" wide x 3" tall
  • Wall thickness: 3/16"
  • 1-Year limited warranty


Dimensions

Note: This stake pocket is designed to accommodate a standard 2x4, which measures 3-1/2" wide x 1-1/2" thick.



83072 Curt Weld-On Pocket Anchor for 2 x 4 Stud





Video of Curt Stake Pocket for Flatbed Trucks or Trailers - Weld On - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Tie Down Anchors - Trailer Tie-Down Anchors - C83072 Review

Today we're going to be taking a look at part number C83072. This is the Curt Stake Pocket for Flatbed trucks or trailers. The heavy duty bracket is simply going to weld on and attach to your flatbed truck or utility trailer, to create one stake pocket. It's going to support a standard 2 x 4 stake, so that you can build a sidewall to help keep your cargo contained and organized. It could also be used as a tie down point for cargo straps and binder chains, hooks, really anything that you need to use it for. These things are really handy and very versatile.

Again, it is a weld on installation. It's made from a solid, sturdy, steel construction. It has that raw steel finish on it, and it's going to be made here in the U.S.A. Again, this is designed for utility trailers and flatbed trucks. We're simply going to go over a few basic measurements starting with the exterior dimensions. Measuring from edge-to-edge, that's going to give us a measurement of about 4 1/8 of a inch.

Measuring this direction, edge-to-edge, it's going to give us a measurement of about 3 inches. If we measure from a flat surface to the very top here, that's going to give us a measurement of about 1 7/8 of an inch. Internally that measurement's going to measure about 1 5/8 of an inch. Inside edge to inside edge, that's going to give us a measurement of about 3 3/4 of an inch. The thickness of the steel, that's going to measure 3/16 of an inch thick. Keep in mind that this stake pocket is designed to accommodate a standard 2 x 4.

That means your standard 2 x 4 is going to measure 3 1/2 inches wide by an 1 1/2 thick, so this is going to work perfect, again, for a standard 2 x 4 board. That's going to do it for our review of part number C83072. This is your Curt Stake Pocket for flatbed trucks or trailers. .


Customer Reviews

Curt Stake Pocket for Flatbed Trucks or Trailers - Weld On - Qty 1 - C83072

Average Customer Rating:  4.7 out of 5 stars   (41 Customer Reviews)

Weld-on stake pocket installs on your utility trailer or flatbed truck. It is designed to hold a 2x4 stake so that you can build a sidewall to help keep cargo contained.

- C83072
by:

Added these to supplement the pockets that the trailer manufacture had provided on the trailer. Can not have too many pockets spaced around the trailer to tie down loads in the most secure manner. They are well made and easy to weld on to the trailer


Comments
very well. i can tie loads where i want to rather than were the trailer manufacture placed pockets
Rab - 04/17/2021


- C83072
by:

These weld on stake bed cleats are exactly what I was looking for. They match the existing cleats of the trailer (which does not have enough of them) so I can transform a 14 ft. flat bed trailer into a stake bed trailer.


Comments
Perfect, no negative issues. Glad I used them. Would recommend them to everyone.
Terry T - 10/04/2018



- C83072
by:

These stake pockets are very well made, clean and easy to weld onto my flatbed car hauler. My stake D-rings fit perfectly in these pockets. I needed a couple extra pockets on my trailer and these filled the bill. I would certainly purchase these again from etrailer, great experience.



- C83072
by:

Wow, great first experience with eTrailer! The part price was very reasonable, and the service was outstanding. Our order was small, we need only one replacement weld-on stake pocket. The stake pocket C83072 was exactly a match to the existing ones on our trailer. Steel edges are a little sharp but quality, size, and fit were good.



- C83072
by:

A bit pricey for bar with two bends. Annoying part was having to remove 1/8" to 3/16" from one side to get the pockets to be square and flat to my trailer frame. A person should not have to rework such a simple fabricated part. After trimming and squaring, the pockets seem to be OK.



- C83072
by:

I received the products as described, and they were exactly as presented. they will work perfectly for the side of my Trailer. They were received quickly and priced well too.



- C83072
by:

Ordered a few Curt Stake Pocket weld-on brackets for my cargo trailer: it was easy, etrailer.com has great products and I received it when they said it would arrive. Thanks, guys!



- C83072
by:

Just a piece of metal, a little pricey for a C shaped piece of plate metal, but worked good and saved time on fabrication. Appeared to be slightly wider than the factory installed 2x4 pockets on my trailer, but work great for tie downs. Had them installed for over a year.



- C83072
by:

1 bracket was not good. A definitely bad one and should not have been shipped. The other 15 were perfect. The bad bracket cost you a star.



- C83072
by:

Great service good product, The only issue with the stake pockets is that they needed to be ground down the edges were sharp on all of the pockets.



- C83072
by:

These are good quality pockets, some of the best I have seen


Comments
all is well and working fine. Your store is the best! could use LESS e-mails Thanks
JR - 09/19/2018



- C83072
by:

What I needed when I needed it!



- C83072
by:

Great communication, fast shipping! I have not welded on trailer yet.



- C83072
by:

Great communication, fast shipping! I have not welded on trailer yet.



- C83072
by:

Works perfect



- C83072
by:

Angled cuts and very sharp edges on 3 of the 4 purchased, definitely need a quick finishing before installing if you ever plan to touch them, otherwise a good fit.



- C83072
by:

Would be better if it came with a hole for inserting a bolt or something as stakes can jump out on bumpy roads. Not a big deal though.



- C83072
by:

Exactly as described. Fast shipping.



- C83072
by:

As described quick delivery just what I needed


Comments
Fantastic
Moe - 05/24/2018



- C83072
by:

What I needed for a fair price. Never let down from etrailer. Thanks!



- C83072
by:

Just what I wanted. The description was perfect. Fast shipping and great price!



- C83072
by:

Stake pockets arrived very promptly and as described in the add. I am very pleased with the entire process.



- C83072
by:

They will work like I wanted



- C83072
by:

They got what you need when you need it!



- C83072
by:

Product was as stated, arrived when stated. Excellent Product and on time shipping.


25
41
Show More Reviews

Ask the Experts about this Curt Tie Down Anchors

  • Difference Between Stake Pockets
    I believe you may have been referencing the Curt # C83072 and the etrailer # HW03-080 because the only stake pocket from Redline is the Stake Pocket Tie-Down Anchor # WFSPDR which has a D-ring and is much more than twice the Curt because it has a different application. Assuming that, the difference between the two stake pockets is simply the dimensions. The Curt # C83072 has inner dimensions of 3-3/4" long x 1-5/8" wide x 3" tall and has steel which is 3/16" thick, while the etrailer...
    view full answer...
  • Stake Pockets for Utility Trailer
    We carry a number of stake pockets and you can choose the correct one for your application in terms of size and weld or bolt on. The bolt-on option is the CE Smith Stake Pocket # CE45004G which is 3-1/2" long x 1-1/2" wide x 2-1/2" tall, has a stake pocket opening of 3-1/2" wide x 1-1/2" deep and 3/8" diameter mounting holes. For weld on stake pockets there is the Curt # C83072 which is 4-1/8" long x 1-7/8" wide x 3" tall; the etrailer # HW03-080 which is 3-9/16" wide x 1-9/16" deep...
    view full answer...
  • Do 2x4s Get Attached Into the Stake Pocket # C83072
    Typically there is a wall section built of wood and the stake pockets like part # C83072 allow the 2 x 4s to install. Usually the top section of the wall is attached at the front and back of the flat bed in some way which will hold the boards into the pockets. These pockets are designed to fit the standard 2x4 size and allow a bit of movement but if the walls built that use the pockets are secured properly the extra space would not be an issue.
    view full answer...
  • Which Stake Pocket Fits a Standard 2x4 Without Cutting the 2x4
    The inside dimensions of the # C83072 Curt Stake Pocket for Flatbed Trucks or Trailers are 3-3/4" long x 1-5/8" wide x 3" tall. A standard 2x4 measures 3-1/2" wide x 1-1/2" thick. Given these dimensions the 2x4 should fit inside of the bracket without a need to cut anything. I have attached a review video for your reference.
    view full answer...
  • Compatibility of the Stake Pocket Tie-Down Anchor Part # WFSPDR
    The Stake Pocket Tie-Down Anchor part # WFSPDR is designed to fit in a standard 2x4 stake pocket opening which actually measures to be around 3-1/2" long x 1-1/2" wide inside to inside. If the "5x1.75inch" you provided is formatted length x width then this tie-down would not be a good fit for you and I recommend adding part # C83072 in order to accommodate it. I have attached a review video of the above tie-down for you. The dimensions for the tie-down can be found on the product page.
    view full answer...

Do you have a question about this Tie Down Anchor?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tie down anchors for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down anchor information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.