Heavy-duty D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring.
Features:
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Square Bolt-On D-Ring Tie Down Anchor. It has a 6,000 pound weight capacity. Now this is a heavy duty tie down, which will provide a solid point to secure your cargo with straps or bungee cords. The maximum load capacity on this is stamped on here, 6,000 pounds.
Safe working load limit of that is a third of it, so it's 2000 pounds. If you notice, this D-ring pivots 90 degrees so that you can attach your straps or bungee cords from multiple angles. The recessed design allows the cargo to slide over the ring without interference when it's not being used. And it is a simple bolt-on installation. You can see it uses square holes, which are designed to be used with carriage bolts.
Now the hardwood install this is not included. A few dimensions on this. The bolt holes, the square holes, are three eights inch by three eights inch. The plate itself, if we measure the width on it, it's right at four and a half inches. The height on it, right at four and seven eight inches tall.
The ring diameter, the D ring diameter, is a half an inch. And the inner ring diameter is gonna be right at one and three eights inches. But again, when this is installed, you can see you can lift your ring up all the way up 90 degrees. Hook to it, and when you're not using it, just go ahead and lay it flat and it's recessed. But that should do it for a look at the Square Bolt-On D-Ring Tie Down Anchor.
.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Heavy-duty D-ring provides a solid attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring.
Do you have a question about this Tie Down Anchor?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.