2. TST
  3. 4 Sensors
  4. Mounts to Valve Stems
  5. RV
  6. Trailer
TST TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors

TST TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors

Item # TST-507-RV-4-C
lowest price pledge
Our Price: $327.00
You Save: $57.00
This item qualifies for Free Shipping
Shipping Weight: 1.95 lbs
In Stock
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


TPMS monitors your RV's tire pressure and temperature and sends real-time info to a wireless color monitor. Tire sensors run checks every 12 seconds and send alerts to monitor. Presets let you monitor up to 4 separate vehicles or orientations. Lowest Prices for the best tpms from TST. TST TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors part number TST-507-RV-4-C can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (11)
  • Videos (1)
  • Photos
  • Why etrailer?


  • 4 Sensors
  • TST
  • Mounts to Valve Stems
  • RV
  • Trailer
  • Standard Sensors
  • Monitor Display

TPMS monitors your RV's tire pressure and temperature and sends real-time info to a wireless color monitor. Tire sensors run checks every 12 seconds and send alerts to monitor. Presets let you monitor up to 4 separate vehicles or orientations.


  • TPMS lets you monitor your RV's tire pressure and temperature via included monitor
    • Also works great with your motorhome, 5th wheel, motor coach, or trailer
  • Full-color, wide-screen monitor provides early warning detection with visual and audible alerts
    • Detects blowouts, significant pressure changes, and tire temperatures exceeding 158 degrees
    • Refreshes automatically with new tire information every 5 minutes
    • Presets let you monitor up to 4 separate vehicles or orientations
  • 4 Sensors check tire pressure and temperature every 12 seconds
    • Brass construction designed for use on rubber, steel, chrome, or nickel valve stems
    • Easy installation onto your tires' valve stems
    • Theft-resistant covers require use of included cap wrench for removal
    • Additional sensors (sold separately) let you monitor up to 38 tires
  • Multiple mounts allow optimal monitor positioning
    • Easy-to-use suction cup mount lets you stick monitor to windshield or dashboard
    • Non-slip, rubber cradle mount lets you set monitor on dashboard
  • Micro USB cable and adapter let you charge monitor with your vehicle's 12-volt accessory outlet
  • Booster strengthens sensor signal and eliminates electronic interference


  • Tire sensors:
    • Dimensions: 1-1/8" diameter x 1-1/8" long
    • Pressure range: 0 psi - 196 psi
    • Operating frequency: 433.92 MHz
    • Operating temperature range: -40 F - 176 F (-40 C - 80 C)
    • Storage temperature range: -40 F - 185 F (-40 C - 85 C)
    • Battery life: 12 months - 18 months
  • Monitor:
    • Overall dimensions: 3" tall x 4-1/2" wide x 1" deep
    • Screen dimensions: 1-5/8" tall x 3-1/4" wide
    • Battery life: 5 days - 7 days on a full charge
    • Battery recharge time: 4 hours
  • Booster dimensions: 2-1/2" tall x 3" wide x 5/8" deep
  • Booster lead wire length: 57"
  • Monitoring capacity with included sensors: 4 tires
  • 3-Year limited warranty


This TST tire pressure monitoring system monitors the pressure and temperature level of the tires on your RV, motorhome, 5th wheel, motor coach, or trailer. The system utilizes sensors that attach to the valve stems of your tires. When a tire sensor detects an anomaly, it will wirelessly transmit an alert to the included digital color monitor. Your monitor will emit flashing lights and an audible alert to notify you of an issue, and it will display details regarding the anomaly. A booster is included to strengthen and amplify the signal that the sensors are sending to the display monitor.

Initial Setup

The TST TPMS is easy to set up and includes all mounting hardware and tools for installation. First, assign the tire sensor positions through the monitor's Learning Mode. Label each sensor with the corresponding numbering code sticker so that you know which sensor is programmed to which tire position. When you are setting up the sensors make sure the one you are programming is at least 2' away from the other sensors. Otherwise the other sensors will interfere with the sensor you are attempting to program. Once the tire sensors have been recognized by the monitor, attach them to the valve stems of your vehicle's tires. Next, install the booster and connect it to a 12-volt power source on your vehicle or trailer.


Use the included suction cup holder to mount the color monitor on your windshield so you can monitor your tires while you drive. You can also use the included rubber, non-slip cradle mount to set the monitor on your dashboard.

TST Color Monitor Display

App Diagram

  1. Current Tire Selection - The tire icons indicate the position of your tires. A solid tire icon indicates that tire is programmed into your current setup. A blinking tire icon indicates that tire is experiencing an anomaly.
  2. Sensor Low Battery Alert - This displays when one of the sensor's batteries is low. The corresponding tire light will also flash to indicate which sensor's battery is affected.
  3. Display Battery Level Indicator - Shows the charged level of the internal battery. When this icon shows one bar it is recommended to charge the display as soon as possible. It takes approximately 4 hours for the battery to fully charge.
  4. Out Of Parameter Alert - This icon will flash during a high or low pressure alert, a high temperature alert, or a fast leak alert. In conjunction with this flashing light, the affected tire light will flash, the HI or LO PRESSURE, HI TEMP, or FAST LEAK indicators will light up, and an audible alert will sound.
  5. Display Alerts - These icons, along with the specific tire icon, will light up to indicate HI or LO PRESSURE, HI TEMP, or FAST LEAK. The bottom row indicates which programming mode you are in.
  6. Red LED Indicator - Lights up during an alert.
  7. Antenna - The multidirectional antenna helps eliminate electronic interference when paired with the signal booster.
  8. Temperature Indicator - Displays the current temperature of the selected tire in Fahrenheit or Celsius. This will also display your selected high temperature parameter during programming.
  9. Tire Pressure Indicator - Displays the current tire pressure of the selected tire. This will also display your selected high and low pressure parameters during programming.
  10. Power Switch - Lets you turn the monitor on and off.
  11. Charging Port - Plug the included USB cable into this port to charge the monitor. The side power switch will not turn off the display when constant power is applied to the unit.
  12. Backlight and Motion Detector - The backlight turns on when the vehicle is in motion, and there is little ambient light. It will sense periods of inaction and the display will "go to sleep" until the vehicle resumes motion.

TST Color Monitor Function Buttons

App Diagram

  1. GO Button - Press the GO button to tell the system where to "go". When pairing the sensors, once you have the tire icon flashing that you want to code, hit the GO button to tell it to get its unique code. If you only want to code a trailer, press the GO button to tell it to go to the trailer. When moving from axle to axle to set your warning pressures, hit the GO button to go to the next axle or next trailer.
  2. SET Button - Press the SET button to program your warning parameters, or to go into coding and set your configurations. This button locks in all specific settings.
  3. BACK Button - Press the BACK button to leave programming, or take the system back to the previous screen. If you need to remove a sensor code, use this button in the coding section to take the sensor position back to the factory settings.
  4. + Button - Press the + button to increase the temperature and pressure settings from the factory defaults. You can also scroll forward through your tires. Press the + button in conjunction with the GO button to drop your towing vehicle from a setting and add it back in.
  5. - Button - Press the - button to decrease the temperature and pressure settings from the factory defaults. You can also scroll backward through your tires. Press the - button in conjunction with the GO button to drop your towed vehicle from a setting and add it back in.

Multiple Wheel Layouts


You can program multiple layouts into the monitor, and you can scroll through each setup on the screen. This system can support up to 4 tire layouts and up to 38 tires total. Make sure to set your high and low pressure alarms for each layout that you are using. Some examples of popular layouts are shown above.

Tire Sensor Installation

Tire sensor Install Diagram

  1. Place the included wrench around the sensor. You must use the wrench to install or remove the sensor from your tire's valve stem.
  2. Screw the sensor onto the valve stem. Tighten the sensor until the air stops leaking and the sensor bottoms out on the valve stem. Give it a slight twist to fully seat the sensor while being careful not to over-tighten

Note: To inflate or deflate a tire you must remove the sensor.



The booster - or repeater - amplifies the signal strength that the sensors send to the monitor. Booster installation requires a 12-volt power source. It is waterproof and can be mounted inside or outside your vehicle with the included mounting hardware. On a trailer, you can mount it in the battery box in front of the propane bottles. On a 5th wheel, you can install it in the house battery bay underneath the overhang. You will want to place it below the bank of mirrors so they don't bounce the signal back and cause the system to malfunction. On coaches with towed vehicles, you can install it in the back battery bay. The power draw is so minimal that you can leave the booster installed without running the battery down. If you decide to unhook it for storage remember to reconnect when you are ready to hit the road. A red light on the repeater indicates that the unit is connected to power and operating correctly.

TST-507-RV-4-C Truck System Technologies RV Tire Pressure Monitoring System w/ Color Display - Repeater - 4 Cap Transmitters

Installation Details TST-507-RV-4-C Installation instructions

Video of TST TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Review of TST Tire Inflation and Repair - TPMS - TST-507-RV-4-C

Today we're gonna take a look at the TST Tire Pressure Monitoring System for your RV with this full color display and the four tire sensors. Now this TPMS kit will let you monitor your RV's tire pressure and temperature with the included full color LCD display unit. It is designed to work great with your motor home, 5th wheeler, or trailer. It does offer a full color widescreen display, which will provide early warning detection with visual and audible alerts.I just wanted to show it. We're gonna zoom in here. And then we're gonna go ahead and turn it on, so you can see the full color on it.

Then you can see it flips right to the . It shows the PSI and the temperature. And then again to set all the settings you just hold the set button. And then when it beeps then you can just hit the plus or minus to go from setting to setting. I'm just gonna turn it back off and turn it back on just to show you the color again.Now this will detect blow outs, significant pressure changes, and tire temperatures exceeding 158 degrees.

They do refresh automatically with new tire information every five minutes. The pressure as you can record are either PSI or bar. Temperature is Celsius or Fahrenheit. We'll zoom back out here.Now the sensors that are used with this are right here. It comes with four sensors.

It'll check the tire pressure and the temperature. They are brass construction. They are designed for use on rubber, steel, chrome, or nickel valve stems. I happened to pull a rubber valve stem here just to show you how the sensor will work. They install very easily onto the tire's valve stems.

Basically what you do is just get them started. You gotta twist the bottom here because the cap will rotate, so you twist that bottom to get it started. And then once you get it started then it snugs up. Now it's snug.You'll take this included cap wrench here. This has a theft resistant cover on it, so what happens is to tighten this on here you take this cap wrench, get it on to the . There you go. And then just finish, tighten this up. Tighten until it seals and then you snug it a little bit more. And then once you do that and take the wrench off that keeps anybody from just walking by thinking they can just unscrew these and take them off because the cover will just spin. And then to remove it just take your cap wrench again, loosen it, and once you get it loose then just go ahead and turn it the rest of the way off. So, very easy to install.And if you notice they give you this little bag here and it includes extra screws, washers, and O rings. The battery is in this sensor here, so if you ever have to replace the battery in any of the sensors you can. There's three screws here that you remove. Take it off. Take off some washers and O ring, and then they give you new ones if you put a new battery in there.The monitoring capacity on this with the included sensors is for four tires. Now you can purchase additional sensors. We do sell them separately. This display monitor will monitor up to 38 tires, and that sounds like a lot, but if you think about it what you can end up doing is putting some on your RV, some on your motor home. They just can be on everything, and then you can just move your monitor from each vehicle around.It does include these display mounts which will allow for optimal positioning. It has this easy to use suction mount for windshield or dashboard mounting. All it does is hook onto the back. Now you can suction it down. It has multiple angles up or down that you can set it in. And if that one doesn't work for you they also offer this cradle mount for a flat surface. You just set it down on the flat surface. Put your display in there and it'll hold it into place.Now this kit also offers a repeater. This repeater will strengthen and amplify the sensor signal forward to the display. It eliminates electronic interference. Right here is a red light. When it's all hooked up this red light will illuminate when it's working. This whole unit is waterproof. It can be mounted inside or outside. It does mount with these included screws, or the hook and loop fastener.It does also include this micro USB cable and the adapter included for charging with your vehicle's 12 volt outlet. You just plug this into your 12 volt power. Put your USB in there. Plug this into your unit and it'll charge your display.A few specs on this monitor. The run time is five to seven days on a full charge. Battery recharge time is about four hours. Screen dimension is gonna be right at 3 1/4" wide by 1 5/8" just on the screen. The dimension overall on the unit is gonna be right at 4 1/2" wide. To the top of the antenna 3" tall and 1" deep.Now the tire sensors. I'm just gonna go ahead and turn that off. The four tire sensors here, pressure range on those is 0 PSI to 196 PSI. Operating temperature range is -40 degrees Fahrenheit to 176 degrees Fahrenheit. Storage temperature range is -40 degrees Fahrenheit to 185 degrees Fahrenheit.Battery life on these sensors is about one to one and a half years. The nice thing about them as I mentioned earlier, they have a replaceable battery in them. It uses a battery Part Number CR1632. Again, you just remove the three screws. Take the O ring and washer apart. Put your new battery in and again they give you some new screws, O rings, and washers.Dimension on the sensor itself, diameter is right at about 1 1/8" wide by about 1 1/8" long. The repeater is gonna be about 2 1/2" tall, 3" wide, and about 5/8" of an inch deep. It does come with a nice Owner's Manual to describe how to operate it, how to hook it all up. But that should do it for the review on the TST Tire Pressure Monitoring System for the RVs with the full color display and the four tire sensors.

Customer Reviews

TST TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors - TST-507-RV-4-C

Average Customer Rating:  4.9 out of 5 stars   (16 Customer Reviews)

TPMS monitors your RV's tire pressure and temperature and sends real-time info to a wireless color monitor. Tire sensors run checks every 12 seconds and send alerts to monitor. Presets let you monitor up to 4 separate vehicles or orientations.

- TST-507-RV-4-C

etrailer is a great place to shop with low prices, a lot of places claim to have low prices only to make up for the low price with high shipping! Not etrailer, you know up front what the price and shipping are. Shipping is usually free depending on what you buy 673140

- TST-507-RV-4-C

I'm not a "gadget freak" and actually trying to simplify my life at this point, but I'm almost ecstatic about how well this system works! After buying my first pick-up truck at age 60, we were finally able to take our 24' travel trailer on out-of-state trips where traversing multiple hills/mountains would be called for. After having been saved by the vehicle's TPMS when returning from a local camping trip last summer after one our 2002 Jeep Grand Cherokee's new tires was punctured by a metal shard, I'd made a firm decision to buy a system to monitor the trailer tire pressure given the severe damage (or worse!) that would likely occur if a trailer tire were to fail while traveling at interstate highway speeds. I chose this particular system after researching various systems as well as evaluating numerous customer reviews. After studying the manual which I'd downloaded before ordering it, I was able to quickly get it set up and "installed" after it was received. Put simply, I literally couldn't be more pleased with how well it works. I opted to use the silicone rubber stand to position the display/control unit in the center dash-top well of our new F250 crew cab diesel, as I already had an Escort 360 and Garmin Nuvi hanging out on the windshield. The receiver was able to consistently receive the transmissions from each of the cap sensors without having to use the repeater, and the display was clearly visible even when I was wearing sunglasses during midday driving under a cloudless sky. I've always prided myself in monitoring my vehicle's dash gauges while driving to help ensure that I'll at least have a chance to preempt an unnecessarily disastrous situation from occurring, so the ability to accurately monitor the pressure and temperature of all four trailer tires without posing an undue distraction while driving is arguably some of the best insurance that I could buy. Of note is that I opted to purchase a system with cap sensors instead of flow-through sensors since the cap sensors have much less mass (i.e. they're much lighter) and therefore more suitable for use on wheel rims with rubber valve stems. 717479

- TST-507-RV-4-C

This is one of those items that is a must have. It's easy to install and setup. I also watched the product video and the spokesman was very detailed on programming. I would recommend watching it. I installed the repeater in the battery compartment located in the front of my trailer. It does not have a switch but you can unplug the inline fuse if your trailer is going to sit for some time. I trimmed the included rubber monitor support to fit the top dash tray for my Colorado. 656807

- TST-507-RV-4-C

I have ordered and received the TPMS from eTrailer. I continue to order from an excellent stock of accessories from eTrailer. Timely delivery and support! Thank you. 635321

- TST-507-RV-4-C

This is an initial review - before I've used this while towing. Setup was fairly straightforward. I entered the setting mode and set the low and then high pressure range and then scanned the ID of each of the 4 monitors. Note: When setting the pressure, you have to cycle through the tires using the go button until the tire you're monitoring is blinking. This isn't really clear but makes sense since potentially if you're using this on the tow vehicle the tire pressure range will be different for front vs rear vs trailer vs spare tires. Once I figured that out everything worked great. 663107

- TST-507-RV-4-C

I have used this exact product (older version) for three years. I am here to tell you that the peace of mind you get from knowing how your tires are doing every second while towing is priceless. I damaged the monitor for the TPMS and ordered a replacement (updated) system that day. 611227

- TST-507-RV-4-C

Seems to be a well-made product, I stumbled a little bit getting it set up needed to make a call for assistance, the person was helpful and I worked through it. Departing in a few days for the Alaska Highway by 38 hundred mile trip from California, I'll see how this works along the way. 641647

- TST-507-RV-4-C

Product works perfectly, gives me incredible peace of mind towing my travel trailer knowing what the tire pressure and temperature is. I don't want a blowout while towing, would not tow without it. 772066

- TST-507-RV-4-C

Item was shipped promptly and in good condition at considerably less $ than available locally. 764479

- TST-507-RV-4-C

The unit is well packed and includes all the mounting equipment one could need. I like the color screen. I'm going to try to use it without the repeater as my trailer is only 20'. 758803

- TST-507-RV-4-C

We have used this unit for a year now and it has worked great. No issues and set up is very straight forward. 749549

- TST-507-RV-4-C

All I have done is read the information on this. Can’t wait to use it on my RV, it is put away for the winter!! The shipping was great , no damage at all. The reason for four stars is because I have not set it up yet. 727520

- TST-507-RV-4-C

Everything I ordered came on time and in great condition. I’ve already recommended you to two fellow campers this morning. 716969

- TST-507-RV-4-C

Product worked as expected and shipping was prompt. Thanks 708233

- TST-507-RV-4-C

Needed something to help monitor the temperature and pressure on our camper tires. Looking forward to trying this. 666824

- TST-507-RV-4-C

Great product. Works as specified.Customer service and Tech support is great, second to none. Etrailer is my go to source for all RV and trailer parts. 665600


Ask the Experts about this TST TPMS

  • How To Add Additional Sensors to the TST TPMS for RVs TST-507
    In order to add TPMS sensors to your tow vehicle to use with the TST TPMS for RVs part # TST-507-RV-4-C you will also need the Brass Tire Sensors for TST TPMS part # TST-507-RV-S4. The only other thing I recommend for you is extra batteries, the Replacement CR1632 Batteries part # MRI-CR1632. The above will include everything that you need to get setup and hit the road.
    view full answer...
  • Does the TST TPMS System Have An Alert for a Low Sensor Battery?
    Yes. The Truck Systems Technologies TPMS for RVs # TST-507-RV-4-C has a low battery monitoring system will let you know when one of the batteries on the sensors is low or completely dead. I've attached a photo of the monitor that shows where you can find the Sensor Low Battery Alert on the screen as a reference.
    view full answer...
  • Is the Signal Booster Required On the TST TPMS for RV Part TST-507-RV-4-C
    It is recommended to install the signal booster that is included with the TST TPMS for RV part # TST-507-RV-4-C. This does help when used with longer trailers yes but its main purpose is to improve the quality of the signal even if not being used over a long distance. The signal booster only has two wires so it's easy to install and it only draws milliamps of power so you don't have to worry about it draining the battery. For your 5th wheel, I recommend you install it in the house battery...
    view full answer...
  • Is 125 PSI Inside a Load Range G 235/80-16 Trailer Tire Too Much While Warm
    The recommended cold psi rating for your Westlake 235/80-16 Tires will take into consideration the increase in both temperature and pressure as they warm while in travel so no, you should not be concerned. I don't really have a max psi while warm but if the temperature inside the tire reaches more than around 160 degrees then you could be at risk of a blowout. If you want to be more cautious of your tires then your best option is to install the TST TPMS for RVs part # TST-507-RV-4-C which...
    view full answer...
  • Does Signal Repeater of TST TPMS for RVs Have to Be Installed
    Yes, you would need to install the signal repeater that comes with the TST TPMS for RVs # TST-507-RV-4-C that you referenced to ensure the monitor always has signal/reception. Especially since you plan to use it with a trailer as well. The repeater needs to be install in a location that's protected from the elements. So in a storage compartment is your best choice if installed on a trailer, but if you can install it elsewhere that's also protected that would be sufficient as well.
    view full answer...
  • Double Beep Heard When Coding Sensors on the TST TPMS TST-507
    I suppose it is possible for the batteries to be dead in your new sensors but this is unlikely. However, I took a look in the manual for the TST TPMS for RVs part # TST-507-RV-4-C and on page 5 it states the following: "Note: If a double beep is heard and the “FFF FFF” does not change, try quickly pushing the “CODE” button once again. This may have to be done a few times for the code to appear. If the sensor does not code, check the battery voltage, be sure other sensors are not close...
    view full answer...
  • Are Sensors On The TST TPMS For RVs Rechargeable
    The TST TPMS for RVs # TST-507-RV-4-C monitor has an included USB recharger so you can recharge that to any computer or device with a USB port. The sensors themselvs use CR2032 batteries that do not recharge but are easily available for replacement at most retailers. TST estimates these batteries last 1-1.5 years between replacement. Included is an overview video for more information.
    view full answer...
  • Recommended Tire Pressure Monitor System for Rubber Valve Stem with Brass Threads
    The TST TPMS for RVs - Color Display - Signal Booster - 4 Flow Through Tire Sensors # TST-507-FT-4-C as our product page states is brass construction designed for use on steel, chrome, or nickel valve stems. These flow through sensors are larger and require that metal stem for support like # AM20906. The TST TPMS for RVs - Color Display - Signal Booster - 4 Tire Sensors # TST-507-RV-4-C on the other hand is brass construction designed for use on rubber, steel, chrome, or nickel valve...
    view full answer...
  • Recommended TPMS System for 40 Foot Long 5th Wheel Trailer Pulled by Long Bed Crew Cab Truck
    According to the folks at ASA Electronics, due to the combined length of your fifth wheel and truck the # NCTP100 iN-Command TPMS system wouldn't be the best choice for your setup. The system would work perfectly on your truck tires, but performance would be inconsistent for your 5th wheel, especially for the back axle. We do have a system that would work very well for you though. I'd recommend the # TST-507-RV-4-C from Truck Systems Technologies. This system provides 4 theft resistant...
    view full answer...
  • Is TireMinder Smart TPMS Compatible with Sync 3 Bluetooth in 2018 Ford F-250
    From what I could find it doesn't look like the Sync 3 system from Ford will support the TireMinder App just yet. You may still be able to use the TireMinder # TPMS-APP-4 that uses the Smartphone display but I don't think you'll be able to utilize it with your 2018 Ford F-250 unless you are somehow able to install the app on your truck. If you can't download the app and/or it doesn't work with the Sync 3 then we have the TST System # TST-507-RV-4-C which uses the standard sensors or...
    view full answer...
  • What Tire Pressure Sensor Kits Does Signal Booster for TST TPMS Use
    The only brand of tire pressure sensors the Signal Booster for TST TPMS # TST-507-R can work with is TST. This will boost the signal for the following sensor kits: # TST-507-RV-4-C, # TST-507-RV-6-C, # TST-507-FT-4-C, and # TST-507-FT-6-C I attached a review video for this signal booster for you to check out as well.
    view full answer...

Do you have a question about this TPMS?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tpms for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tpms information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Installed by:
Jeff D
Installed by:
Adam E
Expert Research:
Jameson C
Video by:
Chris R
Video by:
Michael B
Written by:
Matthew S
Test Fit:
Shane H
Updated by:
Matthew E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-8924