Hub is designed for use on trailer idler axles. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles with #42 spindles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.
Features:
Specs:
The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
THE PRODUCT ITSELF IS GOOD, HOWEVER THE SHIPPING QUALITY IS TERRIBLE AND WE CONTINUE TO RECEIVE DAMAGED PRODUCTS.
Fit was exact, good quality work well as replacement for Dexter part.
Great replacement
all in all, I'm satisfied with the product. the bakes do not stop as well as I'd hoped, but it is sufficient. The only hiccup was my own fault for not realizing the installed studs would have been smaller than the ones on my trailer. I changed all studs and kept rolling.
great price on the hub!
Thank you for the excellent service.
etrailer sent EVERYTHING that i needed. Received 1 wrong size lug nut. 7 out of 8 is not bad. Shipping was great.
I use these on my log arch. They support the weight of the arch and logs, which weigh between 4,000-7,000 pounds. Usually our log arch is used on uneven terrain which can cause the log to sway and bounce a little when being moved. Occasionally we tow our log arch on the road, up to 40-50 mph. Absolutely zero issues with this product. I will be buying a second set when we build our 4 wheel log arch.
Combined with k2r79d and hba16 is the best upgrade ever to a trailer with 7k axele
Troy
Everything was great. Excellent packaging. A tracking number and shipping notice would have been a nice addition.
I think the video link incorrectly describes the outer bearing ID.
Exactly what I expected
Exactly as described. Perfect fit
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.