SnowBear UTV Snowplow for 2" Hitches - Electric Winch - 72" Wide x 19" Tall

SnowBear UTV Snowplow for 2" Hitches - Electric Winch - 72" Wide x 19" Tall

Item # SB324-110

lowest price pledge


Our Price: $1,472.98

You Save: $443.92
Snowplow Kit

This item qualifies for Free Shipping

Shipping Weight: 230 lbs

Snowplow Kit SB324-110 - 2 Inch Receiver - SnowBear
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

  • For UTV
  • 2 Inch Receiver
  • 72 Inch Blade
  • SnowBear
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your UTV. Lowest Prices for the best snowplow kit from SnowBear. SnowBear UTV Snowplow for 2" Hitches - Electric Winch - 72" Wide x 19" Tall part number SB324-110 can be ordered online at or call 800-298-8924 for expert service.

  • All Info
  • Q & A (1)
  • Photos
  • Why etrailer?

SnowBear Snowplow Kit - SB324-110

Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your UTV.


  • Hitch-mounted plow lets you clear parking lots and driveways with your UTV
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
  • Electric winch allows you to easily raise and lower plow
  • In-cab toggle switch lets you raise and lower the plow from your UTV
  • Adjustable, 5-position blade can be manually angled left, right, and straight ahead
    • Manual release handle is easily accessible from front or back of plow
  • Terrain-adjustable design for efficient plowing with less tripping
    • Rocking blade pivots up to 6" to allow maneuvering over uneven terrain
    • Trip springs and eyebolts are angled so blade rests on ground at correct angle
  • Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Skid shoes let you adjust plow height to prevent blade from digging into the ground
  • Strong rubber deflector allows for better visibility by directing snow away from your windshield
  • Rugged and durable, all-steel construction
  • Black powder coat finish provides corrosion resistance
  • Simple installation
    • Slides into your UTV's 2" front hitch receiver (sold separately)
  • ISO certification ensures consistent, quality manufacturing
  • Made in Canada


  • Application: UTVs with a 2" x 2" front receiver
  • Blade dimensions: 72" wide x 19" tall
  • Height adjustment: 9"
  • Pivot allowance: 6"
  • Distance from bumper: 39"
  • 5 Blade angles:
    • Left 11 degrees
    • Left 22 degrees
    • Straight ahead
    • Right 11 degrees
    • Right 22 degrees
  • Distance from bumper: 39"
  • Winch lift capacity: 3,000 lbs
  • Weight: 230 lbs
  • 1-Year limited warranty

The SnowBear UTV plow conveniently slides into your UTV's front-mounted trailer hitch for easy, convenient mounting. The electric winch allows you to easily raise and lower the plow using a toggle switch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the UTV snowplow has a compact yet strong and sturdy design.

Simple, Hitch-Mounted Installation

UTV hitch mount

This hitch-mounted snowplow simply slides into your UTV's front trailer hitch receiver, making it a breeze to install. Because it offers a nearly universal fit, it can be easily switched between multiple vehicles, and you won't have to buy a new plow when you replace your old UTV.

To install the UTV snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.

How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the UTV and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire UTV. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.

To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the UTV plow.

When you are finished, put your UTV in park and lower the plow. Remove the plow from your UTV after every use.

Easy Lifting with Electric Winch


The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.

Add-On Accessories

SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear UTV snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.


The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your UTV's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.


With the caster kit (SB324-126), it will be a breeze to move and store the UTV snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.


The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on a lifted UTV. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.


Make your UTV snowplow more visible by adding bright red snowplow markers (SB324-076). These markers make plowing safer and more efficient by making the edges of your plow easier to see so that you can avoid obstacles.

324-110 Snow Bear UTV Snow Plow for 2" Hitches - Electric Winch - 72" Wide x 19" Tall

Replaces SnowBear SB324-108

SB324-110 Installation InstructionsInstallation Details SB324-110 Installation instructions


Ask the Experts about this SnowBear Snowplow Kit

Do you have a question about this Snowplow Kit?

  • Why

    At we guarantee:

  • Highest quality snowplow kit for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate snowplow kit information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Updated by:
Sarah W
Written by:
Amanda M

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924