FITS 2001 Dodge Ram Pickup
CargoGlide 1500XL Sliding Tray for Trucks - Heavy Duty - 1,500 lbs - Steel Frame - 8" Rail

CargoGlide 1500XL Sliding Tray for Trucks - Heavy Duty - 1,500 lbs - Steel Frame - 8" Rail

Item # CG1500XL-7548

lowest price pledge

Retail:$2,872.00

Our Price: $2,485.90

You Save: $386.10
Slide Out Cargo Trays
Confirmed to Fit
2001 Dodge Ram Pickup

6-1/2 Foot Bed without bedliner

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Truck Freight Shipping

Shipping Weight: 440 lbs

Quantity: 
CG1500XL-7548 - Spray-On Coated Deck CargoGlide Slide Out Cargo Trays
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed


  • CargoGlide
  • 100 Percent Extension
  • 1500 lbs
  • 22 Main Rollers
  • Spray-On Coated Deck
  • 14 Side Rollers
  • Steel
  • 8 Inch
Call etrailer.com at 800-298-8924 for expert service. We are your Dodge slide out cargo trays experts, and offer a lowest price guarantee. etrailer.com carries a complete line of CargoGlide products for your Dodge Ram Pickup 2001. CargoGlide 1500XL Sliding Tray for Trucks - Heavy Duty - 1,500 lbs - Steel Frame - 8" Rail part CG1500XL-7548 from CargoGlide can be ordered online at etrailer.com. Complete slide out cargo trays installation instructions and technical support.


  • All Info
  • Reviews (1)
  • Q & A (5)
  • Videos (2)
  • Photos
  • Why etrailer?

2001 Dodge Ram Pickup - CargoGlide 1500XL Sliding Tray for Trucks - Heavy Duty - 1,500 lbs - Steel Frame - 8" Rail

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly - 100 percent of its length - on sealed bearings. Aluminum sides have built-in tie-down tracks. 1,500 Lbs capacity.


Features:

  • Sliding tray extends out 100 percent of its length from your truck bed for convenient access to cargo
  • Built-in safety stops lock tray in place at 12" increments along glides
    • Prevent accidental extension of tray
    • Allow manual bypass with release latch
  • 36 Bearings provide strong cargo support and smooth tray glide, even when you're parked on uneven surfaces
  • Laminated, 3/4", marine-grade plywood deck supports cargo and prevents skid
    • Textured polypropylene surface resists tears, chemicals, moisture, and flame spread
  • Adjustable feet let you fine-tune the tray height for tailgate clearance
  • Handle cutouts with deck-over-latch release lever enable easy extension of tray
    • Increases tray surface area while providing safe position for fingers and hands
  • 4" Tall extruded aluminum side and cab-end walls help contain cargo
    • Increase to 8" tall near the cab end of the tray
  • Integrated tie-down tracks on side and cab-end tray inside walls help you secure cargo
    • Include 4 marine-grade eyebolts
  • Black powder-coated steel tray frame is durable and rust resistant
  • Pre-assembled tray bolts securely to your vehicle's bed with included PlusNut hardware
    • Installs on your truck bed in a few simple steps
    • Requires drilling
  • Made in the USA


Specs:

  • Tray weight capacity: 1,500 lbs
  • Number of bearings: 36 - with a combined load rating of 57,158 lbs
    • 4 Load bearings - 3,019 lbs each
    • 16 Load bearings - 2,508 lbs each
    • 2 Carrier bearings - 2,473 lbs each
    • 14 Side-thrust bearings - 1,573 lbs each
  • Tie-down track weight capacity: 400 lbs per anchor point
  • Warranty:
    • 4 Years on frame
    • 2 Years on bearings
    • 1 Year on deck surface and substrate


Please note: Because of the size of this item, it ships via truck freight.

CargoGlide sliding truck bed tray

The CargoGlide XL slide-out truck tray extends out 100 percent of its length so you can easily load and unload items in your truck bed without climbing, crawling, or excessive reaching. Instead, this custom-fit bed slide brings the cargo to you - whether you're hauling toolboxes, yard bags, paint cans, or even large appliances and construction materials. And it boasts a 1,500 lbs capacity. Simply move the release lever and give the tray a pull. The tray includes built-in tie-down tracks with eyebolts to help you strap down your cargo. The CargoGlide is perfect for do-it-yourselfers, contractors, hunters, and designated grocery-getters. It's made from top-grade materials, and it installs to your truck bed in just a few steps.


Custom-Fit Sliding Truck Bed Tray

CargoGlide custom-fit precision

The CargoGlide is custom-fit for your vehicle to make the best use of the available space in your truck bed.


CargoGlide slide-out truck bed tray drawer action

The sliding tray works like a supersized, high-quality toolbox drawer. Pull the tray out to bring your gear to you without reaching or climbing up into the bed of your truck. The tray's 36 tough, high-quality bearings are designed to glide smoothly even when the tray is loaded to capacity, so it's a cinch to move heavy loads into and out of your truck bed.


CargoGlide sealed bearings

The CargoGlide uses a combination of full complement, permanently-sealed bearings and sealed needle bearings to ensure smooth, dependable operation without binding, whether you're parked on a level surface or an uneven one, such as a hill or ditch.


Adjustable Positioning

CargoGlide sliding truck bed tray with built-in stops

The CargoGlide has a locking point every 12 inches. These built-in stops let you extend the tray in increments and they serve as safety stops. When fully extended, the tray pulls out to 100 percent of its length.


To slide the tray out, locate the 2 cutout grab handles and red paddle-latch release. Move the latch to release the tray, grab a handle, and pull. You can bypass the stops by maintaining pressure on the latch. To close the CargoGlide, simply push the tray back in until it locks into place.


Sturdy, Slip-Resistant Tray with Tie-Down Track System

CargoGlide steel frame with laminated deck

The CargoGlide's tray is a stout, 3/4" thick sheet of moisture-resistant, marine-grade plywood, laminated with TPO - a tough, polypropylene-based material that resists water, chemicals, abrasions, and flame spread. The tray is held in place by a sturdy steel frame, finished with a chip-resistant powder coat, and it will remain rock steady as you load or unload tools and equipment. The sturdy construction means it won't bend, warp, or twist under a load. The tray can also be tilted up and removed from its track if you need to make room for tall loads.


CargoGlide built-in side wall t-track system

The tray is surrounded on three sides by extruded, 6061-T6 aluminum walls, 4" tall, designed keep your cargo from sliding off the tray and from bumping into the sides of your truck. The CargoGlide also has a built-in tie-down system that helps control your cargo. A track runs along the side and rear inside walls of the tray to give you lots of options for securing your load. The tray comes with 4, marine-grade steel O-rings that can be positioned anywhere along the track to create tie-down points for your cargo. Each tie-down track anchor point has a 400-lbs capacity.


CargoGlide XL 8 inch side wall

To help contain larger cargo, the walls have extensions built-in that add 4" of height for the first 4' of the tray, beginning at the cab end.


Hassle-free Installation

CargoGlide simple installation with PlusNuts

The CargoGlide can be installed in a few simple steps. It's designed to be attached at 4-6 points in your truck bed using PlusNuts and bolts - all part of the included hardware packet. You will need the following tools: tape measure, crescent wrench, drill, knife, 5/16" bit, 1/2" bit, 1/2" socket, and a ratchet or impact driver.


The steps are straightforward (consult manual for full instructions):


  1. Position the CargoGlide in your truck bed and determine clearances (you will need another person to help lift)
  2. Locate and mark attachment points. Make sure there are no gas lines or other obstructions under the truck or van bed where you plan to drill.
  3. Drill the pilot holes installation holes.
  4. Install PlusNuts, bolts, and washers. Then tighten bolts.

Easy Loading/Unloading for Bicycles

The CargoGlide can be equipped to offer convenient bicycle transport. Install fork- or frame-mount truck bed bike racks (sold separately), and then slide the tray out for bike loading/unloading. No more awkward lifting or painful jabs from pedals and handlebars as you hoist bikes into and out of your truck bed.


Adjustable Height

The 2 adjustable feet on the underside of the tray allow you to fine-tune the height of the CargoGlide tray when you install it. This allows you to customize the tray to the perfect height for clearing your tailgate. Turn the feet clockwise to shorten the height of the tray or rotate the feet counterclockwise to extend it up.



CG1500XL-7548 Cargo Glide XL Truck Bed Slide - 100 Percent Extension - Steel Frame - 1500 Pounds Capacity



CG1500XL-7548 Installation InstructionsInstallation Details CG1500XL-7548 Installation instructions

Video of CargoGlide 1500XL Sliding Tray for Trucks - Heavy Duty - 1,500 lbs - Steel Frame - 8" Rail


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for CargoGlide 1500XL Sliding Tray Installation - 2009 Dodge Ram

Today we will be installing our Cargoglide Sliding Tray on our 2009 Dodge Ram Quad Cab, part number cg1500xl-7548. To begin with you will want to clean the bed of your truck out. Next, youll want to position the cargo slider in the bed of the truck and youll want to center it between the wheel wells, as well as setting it about a half inch from the front of the bed. You will want to get the help of at least three other friends to help you set this unit into the bed of your truck. You will notice that the feet on this particular unit all bolt on the outside of the rails, and all of the locations are on the top section of the bed rib. Now that you see where the bolts will be drilled through, youll want to look under the bed and make sure there will be nothing in the way when you drill through.

Now, you will notice in our installation we had to remove the tailgate cover because the sliding tray interfered with it. Once you have the cargo slider situated in your bed, youll want to pull it back to the first stop notch and mark the first two holes. Now that youve done this, youll need to slide the whole unit back far enough that you can go ahead and drill your holes. To do this we will start with a pilot hole of an 1/8-inch bit. Then we will use a 7/16 drill bit to make the final hole.

Once this hole is done youll install your plus nuts using the installer nut tool as well as the longer bolt supplied with the kit. Now once you have both of the anchor points set you will need to remove the bolt as well as the tool needed to install them. Now that we have this done on both of the front holes, youll want to slide the unit back into position and bolt these two down. With this completed youll want to have somebody hold the back of the unit as you slide it all the way out as then the unit is not securely fastened to the bed yet to mark your other six holes. Youll repeat the same process that we did for the first two holes.

Now that the unit is securely fastened to the bed, we will go ahead and install the side rail extenders. These are done by using a hex key wrench and a wrench to hold the nut. As you will notice, you have to angle the pieces to slide them into the track properly. Now that the unit has been bolted down and the side extenders added, you can see how the latch works on a sliding unit. It is under the center section and it is painted red.

You will also notice that this unit slides all the way out to the back of the bed section. You can also use the channel that is along both sides as well as the front of the cargo glide to install the o-ring tie down locations. A few additional things to note for this particular unit; the actual tray area is approximately six foot long by four foot wide. The original sides are approximately 3 inches, and once you add the side extenders you get approximately 8 inches of height. And thatll do it for the installation on our 2009 Dodge Ram Quad Cab of the Cargoslide Sliding Tray 1500xl, part number cg1500xl-7548.


Customer Reviews

CargoGlide 1500XL Sliding Tray for Trucks - Heavy Duty - 1,500 lbs - Steel Frame - 8" Rail - CG1500XL-7548

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly - 100 percent of its length - on sealed bearings. Aluminum sides have built-in tie-down tracks. 1,500 Lbs capacity.

- CG1500XL-6548
by:

Review from a similar CargoGlide 1500XL in Slide Out Cargo Trays


I won't own another pickup with a topper on it without installing a CargoGlide. It is the best upgrade I have ever done. Thank you CargoGlide for the 100% slide out version. I would not go with anything less. 322221


Comments

I am still enjoying the slide out. It was well worth the investment.

Troy - 12/05/2017

31465
1
1

Ask the Experts about this CargoGlide Slide Out Cargo Trays

Do you have a question about this Slide Out Cargo Tray?


  • Aluminum Adapter Kit for CargoGlide 1500XL Heavy Duty Sliding Tray for Trucks CG1500XL-7548
  • The CargoGlide 1500XL Heavy Duty Sliding Tray for Trucks # CG1500XL-7548 is a confirmed fit for the 2013 Ford F-150 with 6-1/2-foot bed and with it you can use the Adapter Kit # CGIK-ALUM6 which includes replacement aluminum washers, zinc bolts, and Nyloc nuts that you will use instead of the standard hardware included with the tray.
    view full answer...

  • Replacement Hardware for Cargoglide 1500XL
  • We have the installation kits that are compatible with Ford Aluminum beds and will work with other models as well. This kit comes with Aluminum washers (which you'll want to switch if you don't have an aluminum bed, zinc bolts, and nyloc nuts. The nuts and bolts will work well with steel bed or aluminum beds. For an 8 foot bed, use CargoGlide Adapter Kit for Aluminum 8' Truck Beds # CGIK-ALUM8 For a 6 foot bed, use # CGIK-ALUM6 If you have a Ford or Dodge, you will also want the...
    view full answer...

  • Will CargoGlide 1500XL Sliding Tray Clear Tailgate on 2017 GMC Sierra 2500
  • The CargoGlide 1500XL Sliding Tray for Trucks # CG1500XL-7548 referenced in your question is confirmed to fit your 2017 GMC Sierra 2500 with a 6-1/2 foot bed. This model actually has 2 adjustable feet on the underside of the tray that will allow you to fine-tune the height of the CargoGlide tray during installation. This will allow you to customize the tray so that it will clear the tailgate on your truck. I spoke with my contact at CargoGlide and he stated that it can be adjusted up...
    view full answer...

  • Does the CargoGlide Slide Out Cargo Tray # CG2000XL-7548 Attach to Truck Bed or Frame
  • The CargoGlide Slide Out Cargo Tray # CG1500XL-7548 that you referenced attaches to the truck bed and not to the truck frame.
    view full answer...

  • Can a Bed Slide be Driven in Extended Position to Haul Cargo?
  • We can offer you a solution to haul lengthy cargo, but the CargoGlide 1500XL, # CG1500XL-7548, is designed to give you easier access to your cargo and should not be in the extended position while traveling. The reason for this is because when driving, additional force would be added to the sliding bed that wouldn't be present when you are parked, which it is not designed to support. If you are looking to transport something like 14 ft. 2x4's, I recommend the Erickson Over-The-Cab Truck...
    view full answer...


Do you have a question about this Slide Out Cargo Tray?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality slide out cargo trays for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate slide out cargo tray information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Video by:
Andrew K
Written by:
Tricia G
Updated by:
Adele M
Expert Research:
Adam R
Updated by:
Laura H
Test Fit:
Shane T
Updated by:
Brian B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924