CargoGlide 2200XL Sliding Tray for Trucks - 2,200 lbs - Steel Frame - 8" Rail

CargoGlide 2200XL Sliding Tray for Trucks - 2,200 lbs - Steel Frame - 8" Rail

Item # cg2200xl-9548

lowest price pledge

Retail:$4,230.55

Our Price: $2,738.77

You Save: $1,491.78
Slide Out Cargo Trays

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 503 lbs

Quantity: 
CG2200XL-9548 - 2200 lbs CargoGlide 20 Main Rollers
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • CargoGlide
  • 100 Percent Extension
  • 2200 lbs
  • 20 Main Rollers
  • Laminated Nylon Deck
  • Steel
  • 2 Side Rollers
  • 8 Inch
Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly - 100 percent of its length - on sealed bearings. Aluminum sides have built-in tie-down tracks. 2,200 Lbs capacity. Lowest Prices for the best slide out cargo trays from CargoGlide. CargoGlide 2200XL Sliding Tray for Trucks - 2,200 lbs - Steel Frame - 8" Rail part number cg2200xl-9548 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (1)
  • Q & A (1)
  • Photos
  • Why etrailer?

CargoGlide Slide Out Cargo Trays - cg2200xl-9548

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly - 100 percent of its length - on sealed bearings. Aluminum sides have built-in tie-down tracks. 2,200 Lbs capacity.


Features:

  • Heavy-duty sliding tray extends out 100 percent of its length from your truck bed for convenient access to cargo
  • Built-in safety stops lock tray in place at 12" increments along glides
    • Prevent accidental extension of tray
    • Allow manual bypass with release latch
  • 22 Bearings provide strong cargo support and smooth tray glide, even when you're parked on uneven surfaces
  • Laminated, 3/4", marine-grade plywood deck supports cargo and prevents skid
    • Textured polypropylene surface resists tears, chemicals, moisture, and flame spread
  • Adjustable feet let you fine-tune the tray height for tailgate clearance
  • Handle cutouts with deck-over-latch release lever enable easy extension of tray
    • Increases tray surface area while providing safe position for fingers and hands
  • 4" Tall extruded aluminum side and cab-end walls help contain cargo
    • Increase to 8" tall near the cab end of the tray
  • Integrated tie-down tracks on side and cab-end tray inside walls help you secure cargo
    • Include 4 marine-grade eyebolts
  • Black powder-coated steel tray frame is durable and rust resistant
  • Pre-assembled tray bolts securely to your vehicle's bed with included PlusNut hardware
    • Installs on your truck bed in a few simple steps
    • Requires drilling
  • Made in the USA


Specs:

  • Tray weight capacity: 2,200 lbs
  • Number of bearings: 22 - with a combined load rating of 56,128 lbs
    • 2 Load bearings - 3,019 lbs each
    • 18 Load bearings - 2,580 lbs each
    • 2 Carrier bearings - 2,473 lbs each
  • Tie-down track weight capacity: 400 lbs per anchor point
  • Warranty:
    • 4 Years on frame
    • 2 Years on bearings
    • 1 Year on deck surface and substrate


Please note: Because of the size of this item, it ships via truck freight.

CargoGlide sliding truck bed tray

The CargoGlide XL slide-out truck tray extends out 100 percent of its length so you can easily load and unload items in your truck bed without climbing, crawling, or excessive reaching. Instead, this custom-fit bed slide brings the cargo to you - whether you're hauling toolboxes, yard bags, paint cans, or even large appliances and construction materials. And it boasts a 2,200 lbs capacity - over 1 ton. Simply move the release lever and give the tray a pull. The tray includes built-in tie-down tracks with eyebolts to help you strap down your cargo. The CargoGlide is perfect for do-it-yourselfers, contractors, hunters, and designated grocery-getters. It's made from top-grade materials, and it installs to your truck bed in just a few steps.


Custom-Fit Sliding Truck Bed Tray

CargoGlide custom-fit precision

The CargoGlide is custom-fit for your vehicle to make the best use of the available space in your truck bed.


CargoGlide slide-out truck bed tray drawer action

The sliding tray works like a supersized, high-quality toolbox drawer. Pull the tray out to bring your gear to you without reaching or climbing up into the bed of your truck. The tray's 22 tough, high-quality bearings are designed to glide smoothly even when the tray is loaded to capacity, so it's a cinch to move heavy loads into and out of your truck bed.


CargoGlide sealed bearings

The CargoGlide uses a combination of full complement, permanently-sealed bearings and sealed needle bearings to ensure smooth, dependable operation without binding, whether you're parked on a level surface or an uneven one, such as a hill or ditch.


Adjustable Positioning

CargoGlide sliding truck bed tray with built-in stops

The CargoGlide has a locking point every 12 inches. These built-in stops let you extend the tray in increments and they serve as safety stops. When fully extended, the tray pulls out to 100 percent of its length.


To slide the tray out, locate the 2 cutout grab handles and red paddle-latch release. Move the latch to release the tray, grab a handle, and pull. You can bypass the stops by maintaining pressure on the latch. To close the CargoGlide, simply push the tray back in until it locks into place.


Sturdy, Slip-Resistant Tray with Tie-Down Track System

CargoGlide steel frame with laminated deck

The CargoGlide's tray is a stout, 3/4" thick sheet of moisture-resistant, marine-grade plywood, laminated with TPO - a tough, polypropylene-based material that resists water, chemicals, abrasions, and flame spread. The tray is held in place by a sturdy steel frame, finished with a chip-resistant powder coat, and it will remain rock steady as you load or unload tools and equipment. The sturdy construction means it won't bend, warp, or twist under a load. The tray can also be tilted up and removed from its track if you need to make room for tall loads.


CargoGlide built-in side wall t-track system

The tray is surrounded on three sides by extruded, 6061-T6 aluminum walls, 4" tall, designed keep your cargo from sliding off the tray and from bumping into the sides of your truck. The CargoGlide also has a built-in tie-down system that helps control your cargo. A track runs along the side and rear inside walls of the tray to give you lots of options for securing your load. The tray comes with 4, marine-grade steel O-rings that can be positioned anywhere along the track to create tie-down points for your cargo. Each tie-down track anchor point has a 400-lbs capacity.


CargoGlide XL 8 inch side wall

To help contain larger cargo, the walls have extensions built-in that add 4" of height for the first 4' of the tray, beginning at the cab end.


Hassle-free Installation

CargoGlide simple installation with PlusNuts

The CargoGlide can be installed in a few simple steps. It's designed to be attached at 4-6 points in your truck bed using PlusNuts and bolts - all part of the included hardware packet. You will need the following tools: tape measure, crescent wrench, drill, knife, 5/16" bit, 1/2" bit, 1/2" socket, and a ratchet or impact driver.


The steps are straightforward (consult manual for full instructions):


  1. Position the CargoGlide in your truck bed and determine clearances (you will need another person to help lift)
  2. Locate and mark attachment points. Make sure there are no gas lines or other obstructions under the truck or van bed where you plan to drill.
  3. Drill the pilot holes installation holes.
  4. Install PlusNuts, bolts, and washers. Then tighten bolts.

Easy Loading/Unloading for Bicycles

The CargoGlide can be equipped to offer convenient bicycle transport. Install fork- or frame-mount truck bed bike racks (sold separately), and then slide the tray out for bike loading/unloading. No more awkward lifting or painful jabs from pedals and handlebars as you hoist bikes into and out of your truck bed.


Adjustable Height

The 2 adjustable feet on the underside of the tray allow you to fine-tune the height of the CargoGlide tray when you install it. This allows you to customize the tray to the perfect height for clearing your tailgate. Turn the feet clockwise to shorten the height of the tray or rotate the feet counterclockwise to extend it up.



cg2200xl-9548 Cargo Glide XL Sliding Truck Bed Tray - 100 Percent Extension - Steel Frame - 2,200 lbs



CG2200XL-9548 Installation InstructionsInstallation Details CG2200XL-9548 Installation instructions

This Product Fits The Following Vehicles

1999 - 2013 GMC Sierra 2500 and 3500 - 8 Foot Bed

2007 - 2007 GMC Sierra New Body 2500 and 3500 - 8 Foot Bed

1999 - 2013 Chevrolet Silverado 2500 and 3500 - 8 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 2500 and 3500 - 8 Foot Bed

2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed

2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed

2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed

2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed

2010 - 2018 Ram 1500 8 Foot Bed

2019 - 2019 Ram 1500 Classic 8 Foot Bed

2010 - 2019 Ram 2500 8 Foot Bed

2010 - 2019 Ram 3500 8 Foot Bed

1970 - 2000 Chevrolet C/K Series Pickup 8 Foot Bed

1970 - 2000 GMC C/K Series Pickup 8 Foot Bed

1970 - 1983 Ford F-100, F-150, F-250, F-350 8 Foot Bed

1992 - 2018 Ford F-150 8 Foot Bed

1997 - 1999 Ford F-150 and F-250 Light Duty 8 Foot Bed

2004 - 2004 Ford F-150 Heritage Series 8 Foot Bed

1984 - 1991 Ford F-150, F-250, F-350 8 Foot Bed

1992 - 1996 Ford F-250 and F-350 8 Foot Bed

1997 - 1997 Ford F-250 and F-350 Heavy Duty 8 Foot Bed

1999 - 2014 Ford F-250 and F-350 Super Duty 8 Foot Bed

2015 - 2020 Ford F-250 Super Duty 8 Foot Bed

2015 - 2020 Ford F-350 Super Duty 8 Foot Bed

1970 - 1980 Dodge Full Size Pickup 8 Foot Bed

1981 - 2014 Dodge Ram Pickup 8 Foot Bed

2014 - 2019 GMC Sierra 2500 8 Foot Bed

2014 - 2019 GMC Sierra 3500 8 Foot Bed

2014 - 2019 Chevrolet Silverado 2500 8 Foot Bed

2014 - 2019 Chevrolet Silverado 3500 8 Foot Bed

See All Vehicle Fits




Customer Reviews

CargoGlide 2200XL Sliding Tray for Trucks - 2,200 lbs - Steel Frame - 8" Rail - cg2200xl-9548

Average Customer Rating:  4.0 out of 5 stars   (1 Customer Reviews)

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly - 100 percent of its length - on sealed bearings. Aluminum sides have built-in tie-down tracks. 2,200 Lbs capacity.

- cg2200xl-9548
by:
2012 Ram 3500

Exactly what I was looking for. I use mine for mostly music equipment. I have loaded this thing down with some serious weight and it operates perfect on a flat surface. The only complaint is if I’m on a incline and I have it loaded down it is extremely hard to pull out and vice verse if I’m up hill it is hard to slow down the rate it comes out. They might have for more money One that has some kind of Mechanical advantage for this problem but overall I’m am satisfied and will just muscle up. 503065


1
1

Ask the Experts about this CargoGlide Slide Out Cargo Trays

Do you have a question about this Slide Out Cargo Tray?


  • Dimensions of CargoGlide 2200XL Sliding Tray for Trucks # CG2200XL-9548
  • The overall length of the tray is 95 inches and the width is 48 inches. The deck height is 4-1/2 inches and the lower side rails are 4-1/2 inches and the higher side rails are 8-1/2 inches. We can certainly get more dimensions for the CargoGlide 2200XL Sliding Tray for Trucks # CG2200XL-9548 that you referenced if needed. We also have a fitguide info that lists what CargoGlide fits what truck which allows people not to have to measure everything to determine a fit too.
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality slide out cargo trays for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate slide out cargo tray information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Written by:
Brian B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.