CargoGlide 1000XL Sliding Tray for Trucks - 1,000 lbs - Steel Frame - 8" Rail

CargoGlide 1000XL Sliding Tray for Trucks - 1,000 lbs - Steel Frame - 8" Rail

Item # CG1000XL-5841

lowest price pledge


Our Price: $2,041.95

You Save: $283.05
Slide Out Cargo Trays

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Truck Freight Shipping

Shipping Weight: 229 lbs

Slide Out Cargo Trays CG1000XL-5841 - 8 Inch - CargoGlide
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly on sealed bearings. Aluminum sides have built-in tie-down tracks. Tray weight capacity 1,000 lbs. Lowest Prices for the best slide out cargo trays from CargoGlide. CargoGlide 1000XL Sliding Tray for Trucks - 1,000 lbs - Steel Frame - 8" Rail part number CG1000XL-5841 can be ordered online at or call 800-298-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (3)
  • Photos
  • Why etrailer?

CargoGlide Slide Out Cargo Trays - CG1000XL-5841

  • CargoGlide
  • 100 Percent Extension
  • 1000 lbs
  • 20 Main Rollers
  • Laminated Nylon Deck
  • Steel
  • 0 Side Rollers
  • 8 Inch

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly on sealed bearings. Aluminum sides have built-in tie-down tracks. Tray weight capacity 1,000 lbs.


  • Sliding tray extends completely out of your truck bed for convenient access to cargo
  • Built-in safety stops lock tray in place at 12" increments along glides
    • Prevent accidental extension of tray
    • Allow manual bypass with release latch
  • 20 Bearings provide strong cargo support and smooth tray glide, even when you're parked on uneven surfaces
  • Laminated, 3/4", marine-grade plywood deck supports cargo and prevents skid
    • Textured polypropylene surface resists tears, chemicals, moisture, and flame spread
  • Adjustable feet let you fine-tune the tray height for tailgate clearance
  • Handle cutouts with deck-over-latch release lever enable easy extension of tray
    • Increases tray surface area while providing safe position for fingers and hands
  • 4" Tall extruded aluminum side and cab-end walls help contain cargo
    • Increase to 8" tall near the cab end of the tray
  • Integrated tie-down tracks on side and cab-end tray inside walls help you secure cargo
    • Include 4 marine-grade eyebolts
  • Black powder-coated steel tray frame is durable and rust resistant
  • Pre-assembled tray bolts securely to your vehicle's bed with included PlusNut hardware
    • Installs on your truck bed in a few simple steps
    • Requires drilling
  • Made in the USA


  • Tray weight capacity: 1,000 lbs
  • Number of bearings: 20 - with a combined load rating of 56,476 lbs
    • 8 Load bearings - 4,700 lbs each
    • 12 Load bearings - 1,573 lbs each
  • Tie-down track weight capacity: 400 lbs per anchor point
  • Warranty:
    • 4 Years on frame
    • 2 Years on bearings
    • 1 Year on deck surface and substrate

Please note: Because of the size of this item, it ships via truck freight.

CargoGlide sliding truck bed tray

The CargoGlide XL slide-out truck tray extends completely out so you can easily load and unload items in your truck bed without climbing, crawling, or excessive reaching. Instead, this custom-fit bed slide brings the cargo to you - whether you're hauling toolboxes, yard bags, paint cans, or even large appliances and construction materials. And it boasts a 1,000 lbs capacity. Simply move the release lever and give the tray a pull. The tray includes built-in tie-down tracks with eyebolts to help you strap down your cargo. The CargoGlide is perfect for do-it-yourselfers, contractors, hunters, and designated grocery-getters. It's made from top-grade materials, and it installs to your truck bed in just a few steps.

Custom-Fit Sliding Truck Bed Tray

CargoGlide custom-fit precision

The CargoGlide is custom-fit for your vehicle to make the best use of the available space in your truck bed.

CargoGlide slide-out truck bed tray drawer action

The sliding tray works like a supersized, high-quality toolbox drawer. Pull the tray out to bring your gear to you without reaching or climbing up into the bed of your truck. The tray's 20 tough, high-quality bearings are designed to glide smoothly even when the tray is loaded to capacity, so it's a cinch to move heavy loads into and out of your truck bed.

CargoGlide sealed bearings

The CargoGlide uses a combination of full complement, permanently-sealed bearings and sealed needle bearings to ensure smooth, dependable operation without binding, whether you're parked on a level surface or an uneven one, such as a hill or ditch.

Adjustable Positioning

CargoGlide sliding truck bed tray with built-in stops

The CargoGlide has a locking point every 12 inches. These built-in stops let you extend the tray in increments and they serve as safety stops.

To slide the tray out, locate the 2 cutout grab handles and red paddle-latch release. Move the latch to release the tray, grab a handle, and pull. You can bypass the stops by maintaining pressure on the latch. To close the CargoGlide, simply push the tray back in until it locks into place.

Sturdy, Slip-Resistant Tray with Tie-Down Track System

CargoGlide steel frame with laminated deck

The CargoGlide's tray is a stout, 3/4" thick sheet of moisture-resistant, marine-grade plywood, laminated with TPO - a tough, polypropylene-based material that resists water, chemicals, abrasions, and flame spread. The tray is held in place by a sturdy steel frame, finished with a chip-resistant powder coat, and it will remain rock steady as you load or unload tools and equipment. The sturdy construction means it won't bend, warp, or twist under a load. The tray can also be tilted up and removed from its track if you need to make room for tall loads.

CargoGlide built-in side wall t-track system

The tray is surrounded on three sides by extruded, 6061-T6 aluminum walls, 4" tall, designed keep your cargo from sliding off the tray and from bumping into the sides of your truck. The CargoGlide also has a built-in tie-down system that helps control your cargo. A track runs along the side and rear inside walls of the tray to give you lots of options for securing your load. The tray comes with 4, marine-grade steel O-rings that can be positioned anywhere along the track to create tie-down points for your cargo. Each tie-down track anchor point has a 400-lbs capacity.

CargoGlide XL 8 inch side wall

To help contain larger cargo, the walls have extensions built-in that add 4" of height for the first 4' of the tray, beginning at the cab end.

Hassle-free Installation

CargoGlide simple installation with PlusNuts

The CargoGlide can be installed in a few simple steps. It's designed to be attached at 4-6 points in your truck bed using PlusNuts and bolts - all part of the included hardware packet. You will need the following tools: tape measure, crescent wrench, drill, knife, 5/16" bit, 1/2" bit, 1/2" socket, and a ratchet or impact driver.

The steps are straightforward (consult manual for full instructions):

  1. Position the CargoGlide in your truck bed and determine clearances (you will need another person to help lift)
  2. Locate and mark attachment points. Make sure there are no gas lines or other obstructions under the truck or van bed where you plan to drill.
  3. Drill the pilot holes installation holes.
  4. Install PlusNuts, bolts, and washers. Then tighten bolts.

Easy Loading/Unloading for Bicycles

The CargoGlide can be equipped to offer convenient bicycle transport. Install fork- or frame-mount truck bed bike racks (sold separately), and then slide the tray out for bike loading/unloading. No more awkward lifting or painful jabs from pedals and handlebars as you hoist bikes into and out of your truck bed.

Adjustable Height

The 2 adjustable feet on the underside of the tray allow you to fine-tune the height of the CargoGlide tray when you install it. This allows you to customize the tray to the perfect height for clearing your tailgate. Turn the feet clockwise to shorten the height of the tray or rotate the feet counterclockwise to extend it up.

CG1000XL-5841 Cargo Glide Truck Bed Slide - 100 Percent Extension - Steel Frame - 1000 Pounds Capacity

CG1000XL-5841 Installation InstructionsInstallation Details CG1000XL-5841 Installation instructions

This Product Fits The Following Vehicles

2015 - 2020 GMC Canyon Crew Cab - 5 Foot Bed

2015 - 2020 Chevrolet Colorado Crew Cab - 5 Foot Bed

Customer Reviews

CargoGlide 1000XL Sliding Tray for Trucks - 1,000 lbs - Steel Frame - 8" Rail - CG1000XL-5841

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

Slide-out truck bed tray lets you get gear without climbing or crawling. Steel-framed, laminated plywood deck extends smoothly on sealed bearings. Aluminum sides have built-in tie-down tracks. Tray weight capacity 1,000 lbs.

- CG1000XL-5841

LOVE the slide!!!!!!! Except for hosing or power washing the bed I NEVER have to get up into the bed for ANYTHING!!!!!!! 633560

- CG1000XL-6347

Review from a similar CargoGlide 1000XL in Slide Out Cargo Trays

The Cargoglide CG 1000XL-6347 has been a wonderful addition to my new 2016 RAM Eco diesel truck. It is easy to install, I installed it on a Saturday with only a little help from my wife to take the track assembly apart and then to slide them back together once I drilled and installed all the attachments to the bed. Even though my truck has a 5'7" bed I love the fact that I don't have to climb into the bed to grab items from the front end, I just slide everything out and grab it off the CG Slide. We recently moved to a new home and it was a great asset to have in moving many house hold items. Many people have commented on the CG Slide and said they would love to have one! Thank you for such a wonderful product, it truly made my truck more useful to me! 471839


Excellent after one year, no problems, works like the day It was installed, a truly well made product. Thank you, I love it!:

Michael - 02/02/2019


- CG1000XL-7041

Review from a similar CargoGlide 1000XL in Slide Out Cargo Trays

Check anywhere, E Trailer has the best price by far. Arrived in 7 business days. Unbelievably, the shipping was free. Make sure of what you are buying from someone else. This is 1000 lb capacity and full-extension. 420544


Ask the Experts about this CargoGlide Slide Out Cargo Trays

Do you have a question about this Slide Out Cargo Tray?

  • How Much Does the CargoGlide 1000XL Weigh in a Chevrolet Colorado ZR2
  • The correct CargoGlide 1000XL Sliding Tray for your Chevrolet Colorado ZR2 is part # CG1000XL-5841. This unit has a shipping weight of 229 lbs therefore the actual weight would likely be around 220 lbs. According to my research, the payload capacity of your Colorado can be between 1,242 to 1,576 lbs so you will need to subtract from this the weight of the CargoGlide in order to determine how much you can haul. In order to determine the exact payload capacity of your Colorado it would be...
    view full answer...

  • Which CargoGlide 1000XL Fits 2015 Toyota Tacoma 5 ft Bed
  • CargoGlide is the authority on the fits of their CargoGlide 1000XL Sliding Tray for Trucks. Since they have the # CG1000XL-5841 listed as a fit for your 2015 Toyota Tacoma 5 foot bed it will fit and work great! This is the 5 foot bed variation like what you need as well.
    view full answer...

  • Deck Profile Height and Dimensions for CargoGlide CG1000XL-5841 in GMC Canyon 5 Foot Bed
  • The CargoGlide part # CG1000XL-5841 has a deck height of 4.5 inches. The side rails are 4 inches high closest to the tailgate and 8 inches closest to the cab. So the CargoGlide is going to sit 8.5 inches above the bed for the first 4 feet of the tray, closest to the tailgate. From the bottom of the tray to the highest point of the CargoGlide is 12.5 inches tall and that is closest to the cab. It also measures 58 inches long and 41 inches wide.
    view full answer...

Do you have a question about this Slide Out Cargo Tray?

  • Why

    At we guarantee:

  • Highest quality slide out cargo trays for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate slide out cargo tray information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Written by:
Brian B
Updated by:
Jason W
Updated by:
Matthew E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.