See what our Experts say about this Yakima Roof Rack

• Yakima Round Bar Roof Rack that Fits 2010 Toyota Highlander
  That's an older Yakima roof rack than we have replacement towers for. It looks like your buddy ruined the lock assemblies and there wouldn't be a way to replace the lock setup. What vehicle do you have? I can look into what the correct Yakima round bar rack is and see if there's a way to reuse at least the bars.
  view full answer...
• Which Yakima BaseClips Fit 2018 Toyota Tundra
  The correct rear baseclip set for a 2018 Toyota Tundra is the part # Y06129. The front clip is part # Y06121.
  view full answer...
• Recommended Roof Rack for a 2024 Toyota Corolla Hatchback w/ No Rails or Crossbars
  To add a roof rack to your 2024 Toyota Corolla Hatchback that does not stick over the sides, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y69UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06129 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06131 This aero bar roof rack system has a 165 lbs capacity. I recommend adding...
  view full answer...
• Will Malone Cargo12 Cargo Box # MPG901 Fit a 2018 Ford Ecosport Titanium?
  The Malone Cargo12 Rooftop Cargo Box # MPG901 will fit your 2018 Ford EcoSport if you have a roof rack with crossbar spread within 24" - 28". It will work with all types of crossbar styles. If you need a roof rack, we actually don't have any options available for your vehicle that will work with the required crossbar spread of the Malone Cargo12. For a roof rack, I recommend the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers # Y28TR with BaseClip Fit Kits # Y06129 and #...
  view full answer...
• Kayak Carrier Solution for 2019 Tundra Crewmax
  I looked up the tonneau cover you have on your 2019 Toyota Tundra with a 5-1/2 foo bed and the deck rail system and it's going to prevent you from being able to install a ladder rack to carry kayaks since it covers up the tops of the bed rails. So you'd probably best served with a roof rack like the Yakima HD rack part # Y01157, # Y28TR, # Y03541, # Y06121, and # Y06129 for the kayaks and lumber. For a kayak carrier you could then use the JayLow part # Y04073.
  view full answer...
• Roof Rack Recommendation for a 2016 Toyota Tundra Crewmax
  Yakima makes a roof rack that is confirmed to fit your 2016 Toyota Tundra Crewmax. For that you would want the part numbers # Y00409, # Y28TR, # Y03536, # Y06121, and # Y06129. Your moonroof would be compatible with this rack. I also was able to get a picture of this rack installed on a Tundra very similar to yours.
  view full answer...
  
• Recommended Roof Rack and Kayak Carrier for 2021 Toyota Tundra
  Because they're a lot more quiet than square or round profile crossbars, I'd recommend a roof rack with aero-style crossbars. I really like the quality and the ease of use provided by the Yakima JetStream roof rack, which can be assembled from the following parts: • JetStream 60 Inch Aero-Style crossbars part # Y00426 • BaseLine roof rack towers, part # Y28TR • Vehicle specific fit kit # Y06121 • Vehicle specific fit kit # Y06129 A lock kit is available separately as part # Y07204 To...
  view full answer...
• Roof Rack Placement and Recommendations for a 2009 Toyota Venza with Naked Roof
  The roof rack options for a 2009 Toyota Venza include custom fit kits that must be placed in certain locations on the vehicle. The measurements for them are included in the installation instructions. Regarding bar spread (the center to center distance from one crossbar to the other) on your Venza it will be 27-1/2 to 33 inches apart depending on the roof rack you choose. A wider spread offers more stability. For a 33 inch bar spacing I recommend the following set up: Yakima CoreBar Crossbars...
  view full answer...
• 2012 Toyota Venza Panoramic Roof Carrying Weight Capacity
  I wouldn't recommend resting any weight whatsoever directly upon the glass panels that make up the panoramic roof of your Venza. The glass that makes up that sunroof is very expensive to replace. If you're wanting to carry cargo on the roof, your best bet would be to use a Yakima Q-Tower roof rack and a small cargo basket like the Thule # TH859XT. According to Yakima, when installed on the Venza, the roof rack will have a 125 lb capacity and would consist of the following parts: 58 inch...
  view full answer...
• What Crossbars do I need to Attach a Thule Hullavator on a 2016 on a 2016 Toyota 4Runner?
  The crossbars you would need can include round, square, aero, elliptical, and most factory crossbars. The Hullavator cannot go on factory bars. With that being said, the Yakima CoreBar Crossbars # Y00421 will allow you to attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The Minimum crossbar spread on the rack is 24 inches, and the Stingray needs to have a maximum width of under 36 inches. Depending on if you have a naked roof, a flush roof, or raised...
  view full answer...
• Will Hullavator Pro Kayak Carrier Fit Thule WingBar Evo Roof Rack on a 2024 Toyota Tundra
  The Thule WingBar Evo system that fits your 2024 Toyota Tundra uses 60" crossbars which are too short to allow enough clearance for the Thule Hullavator Pro # TH898 to keep from hitting your vehicle during use. Instead you'll need to use the Yakima JetStream system and upgrade to larger bars, so you'll need the following parts: - 70" JetStream Crossbars # Y00427 - BaseLine Towers # Y28TR - BaseClips # Y06121 and # Y06129 - Lock Core Kit # Y07204 (optional) These longer bars will give...
  view full answer...
• Yakima CoreBar Roof Rack Installation Measurements for a 2015 Toyota Tundra CrewMax
  When installing a Yakima roof rack on your 2015 Toyota Tundra CrewMax that utilizes the BaseLine Towers, like the Corebar Roof Rack parts # Y00422, # Y28TR, # Y06121, and # Y06129, you want to position the front of the front crossbar 11-3/4" back from the corner of your roof. Then from the front of the front crossbar to the front of the rear crossbar you want to have a distance of 32". This is known as your crossbar spread. Let me know if you have any other questions or if you have a...
  view full answer...
• Which Yakima Base Clips for 2011 Toyota Tundra to Use with Existing Yakima Crossbars
  All of the parts you're looking for can be purchased separately, so you can re-use existing crossbars for your 2011 Toyota Tundra. The parts you're looking for that correspond to your BC121 with B-30 clip and #4 Landing pad can be found with Yakima part # Y06129. The BC129 with B-58 clip and #5 landing pad is available with part # Y06121. If you don't already have the Yakima Base Line Towers you can get 4 of those with part # Y28TR.
  view full answer...
• Yakima Roof Rack System For a 2019 Toyota Corolla Hatchback Naked Roof
  You will need the following parts for installing a Yakima roof rack on your 2019 Toyota Corolla hatchback. Yakima JetStream Crossbars # Y00425 BaseClip Fit Kit # Y06129 BaseClip Fit Kit # Y06131 BaseLine Tower # 8880618 Qty: 4 Torque Wrench # 8881045 You can use the Yakima Same Key System to secure the bars. We have a set with 4 Locks # Y07204 to secure just the towers or a set with 8 Locks # Y07208
  view full answer...
• Wider Spread Roof Rack Recommendation for 2015 Toyota Venza with Naked Roof
  The only wider crossbar roof rack we have available for your 2015 Toyota Venza is the Yakima part numbers # Y00409, # Y28TR, # Y03536, # Y06129, and # Y06131 that you mentioned which has 33 inches of crossbar spread. Most Thule roof accessories that are designed for square bars are also designed for round bars so this should still work great for you.
  view full answer...
• How Can Thule Hullavator Kayak Carrier Get Installed on 2019 Ford EcoSport with Flush Rails
  If you'd be willing to remove the flush rails on the roof of your 2019 Ford EcoSport so that you could install a naked roof Yakima rack that fits your vehicle like the JetStream kit part # Y00425, # Y28TR, # Y06129, and # Y06169 you'd have a great way to install the Thule Hullavator part # TH898! There isn't an aftermarket roof rack configuration out there though that will fit with the flush rails you have now.
  view full answer...
  
• Is Rhino Rack Roof Rack Compatible with 2011 Toyota Venza with Sunroof
  Sounds like your 2011 Toyota Venza has a panoramic glass roof. Currently Rhino-Rack has no roof rack that is a fit for the panoramic glass roof. However we do have a solution for you. The Yakima roof rack, which consists of parts 58" crossbars # Y00409, BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06129 and # Y06131 is a confirmed fit for your Venza. Please consult the vehicle owners manual and/or Toyota for the roof weight carrying capacity prior to loading.
  view full answer...
• Roof Rack Recommendation that Fits 2011 Toyota Venza with Sunroof
  Yakima has a roof rack that fits the 2011 Toyota Venza with a naked roof and a sunroof, but Thule does not have any fits so I can't recommend any of them for you. For an aero style roof rack that fits you'd want the Yakima Corebar roof rack part numbers # Y00422, # Y28TR, # Y06129, and # Y06131 which is a confirmed fit.
  view full answer...
• How to Carry Cargo or Use Bike Rack With 2019 Toyota Corolla Hatchback
  While there is a fantastic option to carry cargo with your 2019 Toyota Corolla Hatchback, there are currently no trailer hitches available for this vehicle. If you were looking for a way to haul cargo as opposed to towing with this your car, I strongly recommend a roof rack, which will let you you use the same type of accessories as a hitch, not to mention give your '19 Corolla Hatchback a cool aesthetic. The roof rack I strongly recommend is from Yakima and consists of: - Yakima JetStream...
  view full answer...
• How to Get 58 Inch Yakima Round Crossbars For 2021 Toyota Corolla Hatchback
  Hey Roy, So to get the 58 inch Yakima round crossbars instead of the 48 inch it's pretty simple, you'll just need to order the parts separately. Here's exactly what you'll need for your 2021 Toyota Corolla Hatchback: - Yakima RoundBar Crossbars - Steel - Black - 58" Long # Y00409 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06129 - BaseClip Fit Kit # Y06131 - RoundBar SL Adapter # Y03536
  view full answer...
• Recommended Roof Rack For 2012 Toyota Highlander With No Side Rails
  I called my contact at Yakima about your 2012 Highlander. They told me the 4 points you said that are on your roof are actually there if you would decide to have the raised side rails installed and are not used as mounting points for a roof rack. The Yakima roof rack we have that is a confirmed fit for your Highlander has three components. To order this roof rack you would need part # Y00426, # Y28TR, and # Y06129.
  view full answer...

Do you have a question about this Roof Rack?