BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2

See what our Experts say about this Yakima Roof Rack

• Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Toyota Tacoma Access Cab
  For your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part # Y00409, # Y28TR, # Y03536, # Y06125, # Y06128. This is a 58 inch bar setup and based on install pictures I've seen of this rack on a similar Tacoma a shorter 48 inch bar would not fit.
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Yakima Roof Rack Components Fit HD Bar Setup on 2020 Toyota Tacoma with Naked Roof
  Yakima does have an HD roof rack that fits your 2020 Toyota Tacoma with a naked roof but the correct towers for your vehicle are the Baseline towers and not the Skyline. What you would need is the following components # Y01156, # Y28TR, # Y03541, # Y06145, and # Y06128. The fit kit you mentioned does not fit your truck. Since you already have the bars you may not need the part # Y01156 as well.
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Kayak Carrier Recommendation for Hobie Mirage Compass Fishing Kayak
  Since your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
  view full answer...
• Correct Yakima SKS Lock Core Kit for Yakima HD Roof and OverHaul HD on a 2016 Toyota Tacoma
  That is an excellent setup and I know you'll be happy with that on your 2016 Toyota Tacoma. I'll list out all of the parts you'll need (just so you have them all in one place) but I did want to say while the OverHaul HD does come with locks, we don't have a way to choose the correct lock cores that come in the packaging so your best bet is to go with the 6-lock core SKS # Y07206 because it gives you matching cores for the 2 needed for the ladder rack and then the 4 needed for the roof rack. With...
  view full answer...
• Roof Rack to Fit a 2018 Toyota Tacoma with Fixed Mounting Points
  If you definitely want a Yakima roof rack then the clamp-style attachment is all that is available at this time. For their system I recommend CoreBar system using BaseLine towers # Y28TR, fit kits # Y06145 and # Y06128, and then either the 50 inch, part # Y00421, or 60 inch, part # Y00422, crossbars. Since your 2018 Toyota Tacoma has the fixed mounting points there are Rhino-Rack systems that fit. I recommend the Vortex Aero bars, part # RRVA126B-2, with # RRRLT600 legs, and # RRQMFK08-2...
  view full answer...
• Ladder Rack and Roof Rack Recommendation for a 2013 Toyota Tacoma
  The Yakima Roof Rack in the video you referenced has been discontinued by the manufacturer. If you have the double cab, then I recommend the following parts for a Yakima roof rack: # Y00426, # Y28TR, # Y06125, and # Y06128. The locks to secure this are # Y07204. This roof rack could be used in conjunction with a truck bed ladder rack like the Thule Xsporter part # TH500XT for your 2013 Toyota Tacoma. This is an adjustable height ladder rack that will let you perfectly match up the height...
  view full answer...
• Which Yakima Roof Rack System For 2021 Toyota Tacoma and Shell
  To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers # Y28TR, Round 48" Crossbar # Y8810021, Round Bar Adapter # Y03536, and Base Clip Fit Kit # Y06128 if you are mounting the crossbar on the rear of the vehicle, or Base Clip Fit Kit # Y06145 if you are mounting the crossbar on the front of the vehicle. For your shell you can use your existing Yakima Round Crossbars or Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition you will...
  view full answer...
• What Yakima Roof Rack Do You Recommend For My 2022 Toyota Tacoma With A Camper Shell
  You will be able to put Yakima tracks on your shell. The rack will consist of the following: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars, part # Y00421, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers, part # Y00221, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. The crossbars have a weight limit of 220 lbs, but check your shell owner's manual to find out its weight limit. Your racks maximum...
  view full answer...
• Roof Rack or Truck Bed Rack for 2022 Toyota Tacoma Double Cab
  For your 2022 Toyota Double Cab you could go with a Thule roof rack like the Wingbar Evo # TH711420, # TH710501, and # TH145107 to carry your bikes with a bike rack, or you could go with the bed rack option from Yakima the BedRock HD # Y01160-58 if you preferred to carry them there. I like the bed option because you won't have to lift your bikes as high and the bikes would be shielded slightly from the wind behind the cab. If your truck bed is clear this would be what I would go with. If...
  view full answer...
• 2018 Mazda CX-9 Roof Rack For A Naked Roof
  If you have what we call a naked roof, meaning no raised rails or flush rails, you cannot choose where to place the rack on the roof of your 2018 Mazda CX-9. Here is a setup for your car on a naked roof. The rack would consist of three separate parts; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06138, BaseClip...
  view full answer...
• Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota Tacoma
  For a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
  view full answer...
  
• Can I Use Yakima Crossbars And Skyline Towers On A 2020 Toyota Tacoma Double Cab
  I can certainly point you in the right direction. Since your 2020 Tacoma Does not have the fixed mounting points, you will not be able to re-use your Skyline Towers. The SkyLine Towers can only be used with fixed mounting points, flush rails and track systems. You will however, be able to re-use your Yakima crossbars. We recommend a minimum 50" crossbar for the 2020 Tacoma Double Cab. So as long as your crossbars are 50" (or longer), we can set you up. You will need the following parts...
  view full answer...
• Parts Needed to Complete Yakima Roof Rack on a 2008 Toyota Tacoma
  Since it looks like you have a Q-towerYakima crossbar setup you would only need the correct fit kit so that it could install on your 2008 Toyota but the clips for those towers are no longer available. Instead you will use the following: BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06125 and # Y06128 Hopefully the crossbar is at least 58 inches long. Otherwise you would need the part # Y00409 as well.
  view full answer...
  
• Will Yakima OffGrid Cargo Basket Fit on 2018 Toyota Tacoma Roof?
  Absolutely! The Yakima OffGrid Cargo Basket # Y07138 is 44" long by 40" wide. From my experience with the Tacoma and some research, the roof size is about 60" long and 52" wide on the double cab. The usual aftermarket roof rack crossbars for the 2018 Toyota Tacoma like # Y00425 are 50" long. This means the Yakima OffGrid will definitely fit on your roof. I attached my video review and install of this rack on a 2020 Toyota Tacoma. It's also a double cab which is an extra point for you since...
  view full answer...
• Yakima Q-Clips for a 2009 Toyota Tacoma Double Cab
  Thanks for sending us a picture! The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y28TR, # Y03536, # Y06125 and # Y06128.
  view full answer...
  
• Solution for Transporting Kayak on 2017 Toyota Tacoma with Extang Encore Tonneau Cover Installed
  I have a couple possible solutions for you to transport your kayak with your 2017 Toyota Tacoma, however there is not a standard ladder rack available that is compatible with the Extang Encore Tonneau Cover. This is because the hardware for the Encore Tonneau Cover partially covers the top of the bed rails and any ladder rack will either require access to the inside of the bed rails or complete access to the stake pockets. The first option for your setup is to add a rail system and crossbars...
  view full answer...
• Aero Bar Roof Rack that Fits 2022 Toyota Tacoma Access Cab
  Since Rhino Rack states it can't fit the Access Cab models that would be the correct fit info. So for a similar roof rack that does fit the Access Cab of your 2022 Toyota Tacoma we have the Yakima JetStream part numbers # Y00425, # Y28TR, # Y06145, # Y06128.
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for 2018 Toyota Tacoma Couble Cab
  You'd need a roof rack confirmed to fit your 2018 Toyota Tacoma Double Cab with longer crossbars like the Yakima Corebar Rack part numbers # Y00422, # Y28TR, # Y06145, and # Y06128 which has 60 inch long crossbars. You could easily use a SweetRoll # Y04074 for each of your kayaks then with this rack. This leaves your truck bed open for the tonneau cover and would work well.
  view full answer...
• Roof Rack for 2013 Toyota Tacoma Double Cab to Carry Two Hullavators
  To carry two Thule Hullavators kayak carriers # TH898 on the roof of a vehicle you'd need to have a roof rack with longer bar lengths as each of these takes up about 28.5 inches of bar space. So your best roof rack setup for your 2013 Toyota Tacoma double cab would be the part # Y00426, # Y28TR, # Y06125, and # Y06128 which has 60 inch long crossbars that the Hullavator could fit on.
  view full answer...
• Parts Needed to Install Yakima Round Bar Roof Rack on 2016 Toyota Tacoma Double Cab
  Since the Q Tower style of Yakima roof rack is being phased out they don't have a set of Q Clips that fit a 2017 Toyota Tacoma double cab at this time but we do have a solution that would work for you. If you have a set of round bars like the part # Y00408 they recommend for your vehicle you can piece together the rest of the roof rack that you'd need. You'll want the BaseLine Towers part # Y28TR, RoundBar SL Adapter # Y03536, the BaseClip kit part # Y06145, and BaseClip kit part # Y06128.
  view full answer...
• Components Needed To Mount Yakima CoreBar Crossbars To A 2023 Toyota Tacoma
  Hey Mike, In order to mount your Yakima CoreBar crossbars on your 2023 Toyota Tacoma you'd need the following components depending on the following factors: Access Cab - Naked Roof: BaseLine Towers # Y28TR BaseClip Fit Kit # Y06128 BaseClip Fit Kit # Y06145 Double Cab - Naked Roof: SkyLine Towers # Y53TR Landing Pad 24 # Y74FR Double Cab - Raised Rails: TimberLine Towers # Y33TR
  view full answer...
• Rack for Rooftop Tent with Tonneau Cover for 2017 Toyota Tacoma
  The best way to mount a roof-top tent to your 2017 Toyota Tacoma with a Truxedo LoPro tonneau cover is using a roof rack like Yakima's CoreBar Crossbars Roof Rack System: # Y00421, # Y28TR, # Y06145, # Y06128. With the way your tonneau cover secures to your bed and the lack of stake-pockets on the Tacoma there isn't a ladder rack available for your Tacoma that works together with your tonneau. I like the CoreBar system because it has a high capacity and it looks good. One thing that...
  view full answer...

Do you have a question about this Roof Rack?