1. Roof Rack
  2. Yakima
  3. Fit Kits
  4. 4 Pack
RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers

RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers

Item # Y06028
lowest price pledge
Our Price: $136.00
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 1.82 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
These custom clips and pads let you mount Yakima RidgeLine towers on your vehicle with flush, factory side rails. Clips attach to hooks in tower assembly and tighten together with a single bolt. Kit includes 4 clips and 4 pads. Lowest Prices for the best roof rack from Yakima. RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers part number Y06028 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (30)
  • Q & A (10)
  • Photos
  • Why etrailer?

Yakima Roof Rack - Y06028

  • Fit Kits
  • 4 Pack
  • Yakima

These custom clips and pads let you mount Yakima RidgeLine towers on your vehicle with flush, factory side rails. Clips attach to hooks in tower assembly and tighten together with a single bolt. Kit includes 4 clips and 4 pads.


Features:

  • Custom-fit clips and pads allow you to mount 4 RidgeLine towers (sold separately) on your vehicle with flush, factory side rails
  • Inner and outer clips tighten together with a single bolt for even, secure grip on rails
    • Snap into place on DropHooks inside towers
    • Powder coated stainless steel clips are durable and rust resistant
  • Molded rubber pads fit the contour of your side rails
    • Clip onto bottoms of towers
    • Protect side rails from scratches and abrasions


Specs:

  • Quantity: 4 clips and 4 pads
  • Limited lifetime warranty


DropHook System Installation

RidgeClip

Custom-fit RidgeClips let you mount RidgeLine towers (sold separately) to your vehicle with flush, factory side rails.


RidgeLine and RidgeClip

The clips are easy to install - simply attach them to the hooks inside the towers. Once the clips are installed just sit the towers on top of your flush rails and tighten them down. The inner and outer clips in each tower tighten with a single bolt to ensure an even, secure grip on your rails.


BaseLine and BaseClip

The included molded rubber pads protect your side rails from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your flush side rails.



8006028 Custom Ridge Clips and Pads for Yakima Ridge Line Towers

Installation Details Y06028 Installation instructions




Customer Reviews

RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers - Y06028

Average Customer Rating:  4.8 out of 5 stars   (30 Customer Reviews)

These custom clips and pads let you mount Yakima RidgeLine towers on your vehicle with flush, factory side rails. Clips attach to hooks in tower assembly and tighten together with a single bolt. Kit includes 4 clips and 4 pads.

- Y06028
by:



- Y06028
by:



- Y06010
by:

Review from a similar RidgeClip in Roof Rack


1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.



- Y28FR
by:

Review from a similar RidgeClip in Roof Rack


Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.



- Y94FR
by:

Review from a similar RidgeClip in Roof Rack


The product works, and seems durable. The downside is that the clips aren't locked into place on the towers. They just kind of dangle there until you get them maneuvered onto your rails and tighten them. They often fall off their hooks when making shifts and adjustments with the rack, getting it into place. I've yet to find a way to get the clips into place while the towers are sitting atop the rails. You basically have to take the whole rack and both towers off, reset the clips and gently place into position again while the clips dangle there. Only to be knocked off their position by the rail itself when trying to place and becoming a 2 oz. chunk of metal falling onto your roof sheet metal.



- Y06025
by:

Review from a similar RidgeClip in Roof Rack


I've been a Yakima roof rack consumer for over 33 years and the RidgeLine Towers are not my favorite. They work for my short trips locally and I am hoping will continue when I do my cross country trips. My biggest issue is it is hard to keep the clips on the little hooks in the towers while installing. Especially the ones on the inside of the towers where it's hard to see when mounting on my roof. I don't leave the rack on my car 24/7. That means I'm messing with those dangling easy to knock off clips every time I need my rack. Yakima needs to come up with a locking system to keep the clips on their hooks. Just one little bump and the clips come off the hook. Directions say to have 2 people, I don't have a spare person around to always be available to help when I need my rack. All my previous Yakima systems have been single user friendly. Once they are on, they've stayed put thankfully. I carry 1-2 kayaks on a 33 year old round crossbar that still has the original end caps. I take care of my stuff. At least Yakima has allowed the continued use of my originally purchased crossbar. Grateful for that.



- Y06029
by:

Review from a similar RidgeClip in Roof Rack


Just what I needed to attach racks to my 2017 cx 5 . Tip of the day , periodically check torque with supplied driver .



- Y06029
by:

Review from a similar RidgeClip in Roof Rack


I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The RidgeClip Fit kit for RidgeLine Towers used with Yakima crossbars are vehicle specific, and worked great. The installation (10-15 min) is super easy. The whole setup looks cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing everything is also super easy (10 min tops). Highly recommend.



- Y33FR
by:

Review from a similar RidgeClip in Roof Rack


Had the parts I needed when I couldn’t find them anywhere else and they were delivered on time.



- Y06025
by:

Review from a similar RidgeClip in Roof Rack


I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.



- Y06006
by:

Review from a similar RidgeClip in Roof Rack


This Yakima rack system for my 2017 Kia Sedona works great and are rock solid. I have two Kayaks I take to the lake, river, and beach house for vacations. Dena was extremely helpful and kept me up to date on everything. It’s very seldom to find a company with reps that actually care about the customer!!!! Please keep this going! The shipping was fast and easy and I had them installed within an hour in this Georgia heat! The only thing missing was the etrailer stickers......... ;p I would definitely recommend this product from etrailer for any of you rack needs!!!



- Y06023
by:

Review from a similar RidgeClip in Roof Rack


They worked!



- Y06022
by:

Review from a similar RidgeClip in Roof Rack


Everything arrived in a timely fashion and the instructions were simple to follow. The fit is good and look forward to many years of use. Kayaks are awaiting for racks to arrive. Thanks for a great product



- Y06022
by:

Review from a similar RidgeClip in Roof Rack


Etrailer had a yakima part I needed that the actual Yakima site didn’t have!!! Fast shipment, no hassles.



- Y06025
by:

Review from a similar RidgeClip in Roof Rack


I was impressed with the ease and speed with which my order was placed, shipped and delivered. While the rack hasn't yet been installed (it's a Christmas present), the package contents are as expected. I appreciate the professionalism in the handling of this order.



- Y06029
by:

Review from a similar RidgeClip in Roof Rack


The RidgeClip Fit Kit made instillation with the Ridgeline Towers a breeze. The clips are great quality and slid into the Towers easily.



- Y89FR
by:

Review from a similar RidgeClip in Roof Rack


Product came sooner than expected. Ashley E. Was the representative I spoke to. I have a lot of experience in the industry and she was well informed and was a great help.



- Y06021
by:

Review from a similar RidgeClip in Roof Rack


No complaints. Except I wish we used it more. Everything went well, their assistance in selection was great and the install went flawlessly.



- Y06029
by:

Review from a similar RidgeClip in Roof Rack


The Yakima roof rack system for my 2019 CX9 with flush mounted rails worked out great, and etrailer customer service was excellent. My first choice was to purchase the Thule system but after digging deeper, I realized that the Yakima was much easier to install. Changing my mind to Yakima was very easy even though the Thule system was almost ready to ship. One suggestion that I think will help with the installation. Add some blue masking tape to the backside of the inner ridge fit clip to temporarily hold it in place. Once secured, the tape can be removed.



- Y06029
by:

Review from a similar RidgeClip in Roof Rack


good product, instructions could be bet ter.



- Y89FR
by:

Review from a similar RidgeClip in Roof Rack




- Y94FR
by:

Review from a similar RidgeClip in Roof Rack




- Y06021
by:

Review from a similar RidgeClip in Roof Rack




- Y06027
by:

Review from a similar RidgeClip in Roof Rack




- Y06013
by:

Review from a similar RidgeClip in Roof Rack



25
30
Show More Reviews

Ask the Experts about this Yakima Roof Rack

  • Roof Rack and Kayak Carrier Recommendation for 2019 Subaru Outback Wagon
    For your 2019 Subaru Outback wagon with flush rails on the roof the roof rack I recommend is the Yakima JetStream part numbers # Y00425, # Y00148, and # Y00241 because this rack will give you aero shaped crossbars which will minimize wind noise and because this rack installs easily and is made of very high quality components. If you happen to have the Touring model you'd need the part numbers # Y00425, # Y00145, and # Y06028 instead. Then for a kayak carrier the Yakima JayLow part...
    view full answer...
    Image 1 for
  • Roof Rack Recommendation to Carry Fishing Kayak with 2018 Subaru Outback Wagon Touring
    Thank you for all of the information! We do have a solution for you to carry a heavier fishing kayak, like the Old Town Predator PDL or the Hobie Outback, on the roof of your 2018 Subaru Outback Wagon Touring Edition. For your application I recommend using the Yakima JetStream roof rack system which consists of their 50" Long Black # Y00425 or Silver # Y00428 JetStream Crossbars, RidgeLine Towers # Y00145, and RidgeClip Fit Kit # Y06028. This system has a 165 lb weight capacity so you...
    view full answer...
    Image 1 for
  • Yakima Roof Rack Compatibility with 2019 Subaru Outback Touring Flush Mounted Rails
    The Yakima Railgrab towers were phased out before being tested with the flush mounted rails that run front to back on your 2019 Subaru Outback Touring. The round bars can be reused if desired using adapter # Y03536 but the towers you need are the RidgeLine Towers for Yakima Crossbars # Y00145 and then you need fit kit # Y06028. I recommend using locks # Y07204 to secure your system. If you don't want to reuse the round bars, then you can forget the adapter and add the Jetstream crossbars...
    view full answer...
  • How To Carry Two Fishing Kayaks On a 2018 Subaru Outback Touring
    In order to carry kayaks on a 2018 Subaru Outback Touring you will first need to start with a roof rack, the Yakima JetStream Crossbar part # Y00425, part # Y00145, and part # Y06028 is what I recommend. Then, you can add kayak carriers which will be based on the kayaks you'll be using. In order to fit two kayaks on the roof, you can either carry both on the side with j-style cradles or one on the side with a j-style cradle and the other on the hull with a saddle style cradle. That...
    view full answer...
  • How to Transport 3 Bikes 1 E-Bike with a 2018 Subaru Outback Wagon
    I do have a recommendation for you, but with your specific bike rack needs you don't be able to use your 1-1/4" trailer hitch on your 2018 Subaru Outback Wagon to carry all 3 bikes. Either the bike rack is way too heavy and requires a 2" receiver, like the Draw-Tite # 76227, or it doesn't have the attachment option you need, plus the weight capacity for your heavier bike. For your application you'll need to use a hitch bike rack and a roof mounted bike rack. The hitch mount bike rack...
    view full answer...
  • Highest Capacity Roof Rack for a 2018 Subaru Outback Touring
    The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails). All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack...
    view full answer...
  • Recommended Roof Rack for a 2019 Subaru Outback Wagon Touring Edition
    Correct, the roof rack for a 2019 Subaru Outback Wagon Touring Edition does install a bit differently. I recommend the Yakima JetStream Crossbar part # Y00425, part # Y00145, and part # Y06028 which is one of the highest quality options for your vehicle that we offer. The RidgeLine Towers that comes with this system have multiple different adjustments which makes for the best fit to the vehicle's roof and the crossbars to sit level. The rubber strips also don't require any trimming as they...
    view full answer...
    Image 1 for
  • Recommended Roof Rack System Compatiable With Yakima SkyBox Lo 15 On 2019 Subaru Outback Wagon
    The Yakima SkyBox Lo Rooftop Cargo Box - 15 cu ft # Y07338 you purchased will fit the 50" Yakima CoreBar Crossbars # Y00421 you were looking at, and will allow you to open the rear hatch without interference. To install the # Y00421 on your 2019 Subaru Outback Wagon you will need the RidgeLine Towers for Yakima Crossbars # Y00145, and Fit Kit # Y06028 if your Subaru is the Touring model. If you do not have the Touring Model you will need the SkyLine Towers for Yakima Crossbars # Y00148,...
    view full answer...
  • Yakima Roundbar Roof Rack Recommendation for Subaru Outback 2018 Touring
    Yakima does have a round bar roof rack that fits your 2018 Subaru Outback Wagon but the recommended bars are considerably shorter than you 66 inch long bars. They recommend the 48 inch bars part # Y00408. Which your bars would technically fit the rest of the roof rack but they would be so long that you'd have clearance issues. They stick way past the sides of your vehicle which could hit other motorists etc. The towers you'd need are the Ridgeline # Y00145, the round bar adapter # Y03536,...
    view full answer...
  • Will the RidgeClip Fit Kit Work On a 21 Ford Edge?
    I have a great setup for you. Unfortunately, the RidgeClip fit kit # Y06028 will not fit the 2021 Ford Edge. The parts that attach your vehicle depend not only on the year/make/model of your vehicle, but also what brand you use. Also, as is the case with the 2021 Ford Edge, If you want a complete roof rack system on your vehicle, here are the parts you need: - Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long - Qty 2 # TH711420 - Evo Clamp Feet for Thule Crossbars - Naked...
    view full answer...

Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jonathan S
Updated by:
Jonathan S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.