Yakima HD Crossbars - Aluminum - Black - 78" Long - Qty 2

Ask the Experts about this Yakima Roof Rack

• Recommended Crossbar Size for Yakima Overhaul HD on 2019 Ram 2500
  You really could use either one of the 68" # Y01158 or 78" # Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars # Y01158. Obviously having longer bars means more space, but the usable space outside of the bars really isn't all that beneficial since it's not going to be able to bear heavier loads. The only time I would recommend going with longer bars in this case is if you were using an awning...
  view full answer...
• Are Thule Accessories Compatible With Yakima HD Crossbars
  The Yakima HD Crossbars are 3" wide x 1-1/2" tall, so most Thule accessories are compatible with them, so long as the Thule accessories mount to channels or bars of that width (you didn't mention the specific accessory for me to verify). The Yakima HD crossbars come in a number of different lengths: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159 I have added...
  view full answer...
• Putting Stronger Crossbars on Sylvan Sport Go Easy Trailer
  That is an interesting project you have there, and I called my friend in Yakima to discuss how it could fit. Since Sylvan Sport is not a brand we work with and can test on, we don't have the information to give confirmed fits. I can give my recommendation though based off my experience with kayak trailers. I am curious about how you can fit 4 bikes and two kayaks onto your bars. A close equivalent of the Go Easy Trailer is the Malone LowMax XtraLight # MAL75FR with its 78" bars or the...
  view full answer...
• Parts to Install Yakima 78 HD Crossbars and Watersport Carriers on a 2014 Jeep Wangler Unlimited
  To use your 78" Yakima HD Crossbars, part # Y01159, on your 2014 Jeep Wrangler Unlimited, you will need the Yakima 42" Tracks, Skyline Towers, HD Bar SL Adapters, and Landing Pad 1s. The Track Pads, part # Y01126, are designed for use on naked roofs (those without rails). They give a more flush look for the roof rack system. This will require some drilling into the hard top, but they allow you to slide the crossbars along the length of the Jeep. The Skyline Towers, part # Y00148,...
  view full answer...
• Yakima BaseLine Roof Rack for 2018 F150 Supercrew 4x4
  In addition to the # Y00426 JetStream crossbars and the # Y00146 BaseLine towers, you'll also need the # Y06122 BaseLine fit kit. If you wanted to go with the HD crossbars, the 78 inch long bars are part # Y01159 and you'd also need the SL adapter so the bars work with the BaseLine towers. The adapter is part # Y03541. According to Yakima, the fact that you have a sunroof won't prevent the rack from being installed, but I recommend taking care before operating it as it can interfere...
  view full answer...
• What Type of Roof Rack System do you Recommend for my 2018 Ram 2500 with a Bare Roof
  Of course using the Yakima HD Crossbars part # Y01159 will give you the bars you're looking for then we can get the rest put together. This will be the towers, HD Bar Adapter and the Baseclips listed. BaseLine Towers for Yakima Crossbars part # Y00146 HD Bar SL Adapter part # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06135 For locks use the Yakims SKS Lock Cores part # Y07204. With this setup you will be able to use the Thule Hullavator Pro Kayak Carrier...
  view full answer...
• Best Way To Add Crossbars To The Bed of a 2008 Chevrolet Silverado
  I have the perfect system to add crossbars to the bed of your 2008 Chevrolet Silverado without drilling. For this, I recommend using the Yakima BedRock HD Towers part # Y01160 with the Yakima HD Crossbars part # Y01159. This is a brand new system from Yakima that features clamp on mounting feet that locks to your bed and durable crossbars capable of up to 300 lbs. There is not going to be another system on the market that will be able to provide you with a 300 lb weight capacity save for...
  view full answer...
• Yakima HD Crossbar on Overhaul System Compatibility with Thule Hullavator Pro Kayak Carrier
  For your 2018 Ford F-150 Short bed, the Yakima OverHaul HD Adjustable Truck Rack w/ 68" HD Crossbars - Aluminum - 500 lbs # Y01151-58 is the correct fit. These Yakima HD bars are 3 inches by 1-1/2 inches and will work perfectly with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading # TH898. If you desire longer bars for more clearance when using the Hullavator, then you will use the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights - Aluminum...
  view full answer...
• Can Pace Edwards Ultragroove Tonneau Cover Be Used With Yakima OverHaul Or OutPost Ladder Rack?
  You can install either the Yakima Outpost HD or the Yakima Overhaul HD onto the Pace Edwards UltraGroove Retractable Hard Tonneau Cover # 311-KRDA24A55. These Yakima systems both use the HD crossbars and have a weight capacity of 300lbs on-road use. For the OutPost setup you will need Uprights # Y01152, Adapter Kit # Y01155, and HD Crossbars 71" # Y01159. For the OverHaul setup you will need Uprights # Y01151, Adapter Kit # Y01155, and HD Crossbars 71" # Y01159. I attached a few...
  view full answer...
• Do Yakima Rooftop Cargo Boxes Fit on the Yakima OverHaul HD Crossbars
  Yes they do! The Yakima OverHaul HD Adjustable Truck Rack # Y01151-59 that you referenced utilizes the Yakima HD Crossbars # Y01159 which measure 78" long x 3" wide x 1-1/2" tall which means they are about 1/2" taller and 1/8" thinner than the Yakima JetStream crossbars. Yakima has confirmed that all of their rooftop cargo boxes, like the SkyBox 18 # Y07336 are compatible with the HD bars. I have attached a link to all of the Yakima rooftop cargo boxes that you can filter through....
  view full answer...
• Recommended Ladder Rack for 2005 Hummer H2 SUT for Rooftop Tent
  The Reese Towpower TransRACK Workmate Truck Bed Ladder Rack - 800 lbs # RP7063500 will not be compatible with your 2005 Hummer H2 SUT. There isn't a confirmed fit from any of our manufacturers so you will likely need to have something customized. The closest option that may be compatible is the Yakima Overhaul HD Adjustable Truck Bed Rack - Aluminum - 500 lbs # Y01151 which is height adjustable to also utilize the roof rack rear crossbar and has a base that is more easily mounted....
  view full answer...
• Tonneau Cover for 2019 Ford F-150 That works With Yakima OverHaul and Yakima OutPost Bed Rack
  You can use the Yakima Overhaul HD Adjustable Truck Bed Rack # Y01151 or the Yakima OutPost HD Mid-Height Truck Bed Rack # Y01152 with a tonneau cover on your 2019 Ford F-150; the compatible tonneau cover is the RetraxPRO XR Hard Tonneau Cover, and the correct part number will depend on the size of your 2019 F-150's bed: - 5-1/2 Foot Bed: RetraxPRO XR Hard Tonneau Cover # RTT-80373 - 6-1/2 Foot Bed: RetraxPRO XR Hard Tonneau Cover # RTT-80374 - 8 Foot Bed: RetraxPRO XR Hard Tonneau...
  view full answer...
• Can You Use the Yakima HD Crossbar On a Rack and Roll Trailer
  No. 78" Long Yakima HD bars # Y01159 cannot be mounted on the Yakima Rack and Roll Trailer # Y08107. The Rack and Roll trailer is only designed to be used with round crossbars. If you're looking for a kayak carrier that has a higher capacity and comes with the HD bars the Yakima Easy Rider # Y08129 is what you're looking for. The EasyRider is a double-decker trailer that gives you 2 levels of storage, plus the built in shocks on the trailer provide you with added cushioning to protect your...
  view full answer...
• Compatible Tonneau Cover, Ladder Rack, and Kayak Carrier Set on 2020 GMC Sierra 1500
  The Tonneau Cover that's a confirmed fit for your 2020 GMC Sierra 1500 with 5-3/4 foot bed is # RTT-80481. The Yakima Overhaul HD that works with this is # Y01151 paired with the Tonneau Cover Adapter # Y01155 and the 78" HD Bar Crossbars # Y01159. As for the Thule Hullavator # TH898, with your 78" of bar space, you have plenty of bar space and some overhang for this kayak carrier. Just note that the ladder rack has 300 lbs weight capacity on-road and 180 lbs off-road. Since the Hullavator...
  view full answer...
• Is Yakima MegaWarrior Cargo Basket Compatible With Yakima HD Crossbars
  You can absolutely use Yakima HD crossbars with the Yakima MegaWarrior Large Roof Rack Cargo Basket # Y07080. The two are compatible, but you will need to use the clamps to install the MegaWarrior as there is not a way to mount this basket in the bars' channel. The only thing I do recommend adding to this basket, in order to protect your investment, is the Locking Brackets with SKS Cores # Y07064. As for the Yakima HD crossbars, they are available in a number of different sizes: 55...
  view full answer...
• Can the Yakima OutPost HD Truck Bed Ladder Rack Be Used with a Toolbox
  Yes, you can position the uprights on the Yakima OutPost HD Mid-Height Truck Bed Ladder Rack Towers part # Y01152 further in so that you have room for your crossover style toolbox. The crossbar spread is pretty much up to you and what you are carrying. Please note the above system does not come with crossbars so you will need to purchase these separately. For this, we have part # Y01157 for mid-size trucks or part # Y01159 for full-size trucks. If you have a Nissan or Toyota with the...
  view full answer...
• Cargo Basket Mounted on an UltraGroove Tonneau Cover on a 2016 Ford F-150
  We do have Yakima and Thule crossbar systems that will install with your UltraGroove Tonneau Cover. For Yakima, you can go with the HD Bars, choosing whichever length works best for you. We have a 68" set, part # Y01158, and a 78" set, part # Y01159. To pair them with your tonneau tracks, combine the bars with the HD Bar SL Adapter, part # Y03541; the Skyline Towers, part # Y00148; and the Landing Pad 19, part # Y00245. I've linked to a video review of the HD Bars. For the Thule crossbars,...
  view full answer...
• Ladder Rack Compatibility on 2010 Toyota Tundra with Hard Tonneau Cover with Track System
  The Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum - 800 lbs # 59799 will fit on a 2010 Toyota Tundra without the tonneau cover in place but not with it installed. For a track system on a hard tonneau you can use the Yakima Overhaul HD Adjustable Truck Bed Rack # Y01151 which is compatible with the track rails. Then you can use the separate crossbars available in the following lengths: 55"--Y01156 60"--Y01157 68"--Y01158 78"--Y01159 The weight capacity on the rack will...
  view full answer...

Do you have a question about this Roof Rack?