bing tracking image
  1. Roof Rack
  2. Yakima
  3. Crossbars
  4. Aero Bars
  5. 2 Bars
  6. 70 In Bar Space
Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2

Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2

Item # Y00430
lowest price pledge
Our Price: $245.00
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity. Lowest Prices for the best roof rack from Yakima. Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2 part number Y00430 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (269)
  • Q & A (0)
  • Videos (4)
  • Photos
  • Why etrailer?

Yakima Roof Rack - Y00430

  • Crossbars
  • Aero Bars
  • 2 Bars
  • 70 In Bar Space
  • Yakima
  • Silver
  • Non-Locking
  • Aluminum

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.


Features:

  • Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
    • Pair with Yakima towers and a fit kit (sold separately) to create a complete roof rack
  • Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
    • Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
    • Aero-style bars reduce drag to help maintain fuel efficiency
  • Full-length design maximizes space for carriers and accessories
  • Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
    • Works with most universal-mount bike, water, snow, and cargo carriers
  • Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
    • Simply push down on the SmartFill strips to slide in accessories - no trimming required
  • Bottom channels allow for easy installation on Yakima towers
    • Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers (sold separately)
    • Etched measurements on bottoms of bars help center rack on your roof
  • Lightweight aluminum bars are durable and rustproof
    • Internal JetTruss extrusions provide exceptional bar strength
  • Clear anodized alloy finish is corrosion resistant


Specs:

  • Quantity: 2 crossbars
  • Crossbar weight capacity: 165 lbs
  • Dimensions: 70" long x 3-1/8" wide x 1" tall
  • T-slot dimensions: 1" wide x 1/2" tall
  • Limited lifetime warranty


Yakima JetStream

The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit (sold separately) to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.


Aerodynamic JetFlow Design

JetStream Aerodynamic Design

The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.


Strong, Durable Construction

JetStream JetTruss Extrusion

The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.


Hassle-Free Installation

JetStream Bottom Channel

Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.


JetStream Etched Measurements

Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.


JetStream Installation Bracket

Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).


Channel-Mounted and Clamp-On Accessories

JetStream SmartFill Rubber Strips

JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.


JetStream Clamp-On Accessories

You can also attach most universal, clamp-on accessories and carriers to the bars.


Maximum Cargo Carrying Capacity

Full Length JetStream Crossbars

The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.



8000430 Yakima Jet Stream Cross Bars - Aluminum - 70" Long - Qty 2 - Silver



This Product Fits The Following Vehicles




Video of Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Yakima Roof Rack Review - 2018 Ram 1500

Speaker 1: Today on our 2018 Ram 1500 we'll be taking a look at and showing you how to install the Yakima Roof Rack System. The Yakima Roof Rack System is a great solution for carrying your vehicle accessories on your roof, whether those are bike racks, ski and snowboard carriers, or kayak carriers. They also pair well with your ladder racks. This is going to consist of the Yakima JetStream Crossbars, part number: Y00427, the baseline towers, part number: Y00146, and the Fit Kit, part number: Y06135. Now keep in mind that our crossbars are also available in silver, with part number: Y00430.The aerodynamic shape of our crossbars is going to help reduce wind noise and drag, along with that weather strip on the inside. This can also be pushed down and we can add in channel-mounted accessories, unlike some other roof racks where you'll actually have to remove your weather strip.

The BaseLine tower of our Yakima crossbars does have the option to put in the same key system lock core. That's going to help prevent theft and tampering of your roof rack system as a whole. You'll also see our Fit Kit here. It's going to consist of our pads, as well as our clamp. Those will be custom cut to fit our vehicle, and have rubber padding on any portion that touches our vehicle to prevent any scratches or abrasions.

The Yakima roof rack system has a 165 pound weight capacity, but you do what to double check your vehicle's owner's manual to make sure your roof can withstand that much weight. It's also going to come with a Limited Lifetime Warranty, and be quick and easy to install. We'll show you how to do that now.Now, we already have our front crossbar installed. We're gonna show you how to install the back bar. We've got half of it together.

Everything on our table is what we will need to install our roof rack system. Here in the back, we're going to have our weather strip that goes underneath our crossbar. This can be cut down and placed in whenever we have our towers in place on the bar. We'll have our endcaps for our towers, as well as the other tower we're going to install, the pieces of our Fit Kit both the clamp and the pad, our tool to tighten everything down and we've provided our own flat tape measure, and we have our adapter pieces that are going to connect our tower to our crossbar, as well as our crossbar endcap.To start off, we can take the pad and place it onto the bottom of our tower. We're just going to squeeze it until it clicks into place.

Now, at the top we're going to place on our adapters. First the plastic, that will click into place. Then for our metal we're going to pull out on the gray door here. We can place the metal adapter in the center, and flip our tower over. We're going to have two bolts. We're going to loosen the one closest to the front of our tower. When we loosen that we can adjust it so that it connects to the metal bracket, and we can tighten it down until our bracket is flush at the top. Once that bracket is flush, we can place it onto our crossbar.Now we can slide this down on our crossbar until we're at the 46-1/4" mark on our bar. Once we have it in place we can tighten down that bolt. Now would be the time to take our weather strip and cut it down and place it into the empty slots to prevent any wind noise or drag. Lastly, before we load this up onto our vehicle, we'll place on our crossbar endcap. We can start off now by taking our crossbar, and we're going to place it on our roof. We'll now measure out our crossbar spread from the front of our front bar, to the front of the back. That's going to be 32". Again, we'll do the same thing to the other side. Next, we'll open up our vehicle doors, then we can open up the gray door here. We'll take our clamp underneath and make sure it secures to our bolts here. Then we can tighten up the bolt at the top and that's going to lower our clamp so that it sits just up against the door frame. Now we can do the same thing to the other side.Now we can tighten down our clamp by using our included tool, then tightening down the bolt that it is attached to. We want to make sure we tighten this down evenly on each side. Once we hear the clicks, that's when we know we have enough torque behind our bolts. We're going to close up the plastic door, then we can take the endcap and click it into place. Now we're ready to load up our accessories and hit the road.And that's going to be our completed look at the Yakima Roof Rack System on our 2018 Ram 1500.


Customer Reviews

Yakima JetStream Crossbars - Aluminum - Silver - 70" Long - Qty 2 - Y00430

Average Customer Rating:  4.9 out of 5 stars   (269 Customer Reviews)

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

- Y00430
by:
2015 Chevrolet Silverado 1500

As usual, Yakima quality and design are unsurpassed. Easy to mount as well. I have not used them as much as I expected for two reasons. On my pickup they are way up there. Need a ladder to access them. Also, the carwash I use requires that they be removed. So, I leave them off for the most part.



- Y00430
by:



- Y00426
by:

Review from a similar JetStream in Roof Rack


Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!



- Y00428
by:

Review from a similar JetStream in Roof Rack


The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;) These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp. Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise. These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done. They look good, too;) etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.



- Y00425
by:

Review from a similar JetStream in Roof Rack


The rack system seems very good, but time will tell, of course. The installation is difficult and time consuming. I purchased the system needed from etrailer website with guaranteed to fit pieces. I would call myself a very experienced do-it-yourselfer. I followed directions slowly, carefully, and exactly, yet there were problems. The video for installation given for my exact order did not match the printed and actual assembly and installation directions. The baseclips that were guaranteed for my model vehicle were actually for a different model vehicle according to the enclosed sheet ... however they did work anyway but caused some "looking up" and some confusion during assembly. I was careful to assemble exactly to measurements given ... and once that is all done and tightened and "sealed up" you put them on the roof, only to find that they could have been spaced a bit wider for a perfect fit. They are fine enough and we'll see if they stay tight to the vehicle. If not will need to take it all apart and widen the spacing. It is excellent that basically only one tool that is provided with the racks is needed. And also that each part must "click" when properly tightened. That adds reassurance and satisfaction while assembling. There are so many models of vehicles and it is not easy to figure all this out. etrailer has a very helpful website, response, and videos to help ... but my review is to emphasize that the instructions are not perfect. One needs lots of patience, common sense, and perhaps re-assembly for a perfect outcome.



- Y00425
by:

Review from a similar JetStream in Roof Rack


Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.



- Y00426
by:

Review from a similar JetStream in Roof Rack


The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather. etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.



- Y00425
by:

Review from a similar JetStream in Roof Rack


etrailer came through with speed and quality. A couple of other websites that I looked at could not supply all the needed equipment ("on backorder") in a timely manner. As you know, getting "most" of the roof rack is the same as getting "none" of the rack. So I was very pleased to see that etrailer could send me everything quickly. It is exactly what I needed.



- Y00427
by:

Review from a similar JetStream in Roof Rack


The JetStream crossbars are awesome. Unfortunately the box that these came ' in was damaged, and when I opened it both crossbars had scratches. It is only cosmetic, but when you pay top dollars for a good product you expect that it will be well packaged so is not damaged when shipped. If it wasn’t for the damaged packaging and scratches I would give it 5 starts.



- Y00425
by:

Review from a similar JetStream in Roof Rack


I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.



- Y00426
by:

Review from a similar JetStream in Roof Rack


1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.



- Y00426
by:

Review from a similar JetStream in Roof Rack


I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly! I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips. The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish. After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!



- Y00426
by:

Review from a similar JetStream in Roof Rack


I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!



- Y00425
by:

Review from a similar JetStream in Roof Rack


Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.



- 8880653
by:

Review from a similar JetStream in Roof Rack


I recently purchased a rack system for my 1979 Ford Bronco to haul our new Kayaks. And believe me it was not easy to "fit" a vehicle as old as this. I had some interesting challenges - my truck has a 3" lift and only clears my garage entrance by about 1.5 inches, so whatever I got had to be easily removable (at least in the front). I also wanted it to be multi functional so that I could carry other stuff as well, and the Yakima/Thule systems are great for that. Lastly, I wanted whatever I put on the truck to look good as I have put a lot of time and $ into fixing up this old truck and I didn't want it to look cheezey..... Thanks to the good folks at etrailer I ended up with somewhat of a hybrid approach (my choice) but it worked out exactly as I envisioned it. I purchased the Thule Xsporter Pro system for the rear which works well with only minor modifications to the truck. I can lower it easily so I can get the truck into the garage without removing the system altogether. I really like that the tailgate is still functional with the system installed as some others I had in mind were bumper or hitch attached and would not allow use of the tailgate.... And, lastly it looks nice enough to just leave it on all the time. On the front I chose the Yakima JetStream cross bar held up by a pair of Yakima SkyLine Towers and Landing Pads which I chose because I can easily remove the crossbar/towers to get the truck into my garage. The Landing Pads have covers for when not in use and are small enough to not be too noticeable. I also added the security locks for peace of mind. I have added 3 pictures, the first shows the Landing Pads without the towers & crossbar. You can also see the Xsporter Pro on the rear in its lowered position. The 2nd shot is a closeup of the Skyline Tower. The 3rd picture shows the entire system installed ready for my kayaks (or whatever). Thanks again to the folks at etrailer for their expert advice and customer service.



- Y00425
by:

Review from a similar JetStream in Roof Rack


The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.



- Y00426
by:

Review from a similar JetStream in Roof Rack


The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need. I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.



- Y00425
by:

Review from a similar JetStream in Roof Rack


Really well made, great fitment, a little complicated instructions, but perfect install when they’re followed closely.



- Y00427
by:

Review from a similar JetStream in Roof Rack


First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.



- Y00425
by:

Review from a similar JetStream in Roof Rack


The roof rack came packaged nicely and the instructions were simple to follow. I installed it in about an hour and we have already used it this past Memorial Day weekend. My wife loves the way it looks on her Mazda. Much better than the factory rack



- Y00425
by:

Review from a similar JetStream in Roof Rack


The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.



- 8880653
by:

Review from a similar JetStream in Roof Rack


Working very well in my Jeep Grand Cherokee 2020. It is used to carry my roof top tent



- Y00426
by:

Review from a similar JetStream in Roof Rack


My 2nd order from e-trailer. Excellent and timely service.



- Y00425
by:

Review from a similar JetStream in Roof Rack


Will hold a heavy roof top tent and take a beating



- 8880653
by:

Review from a similar JetStream in Roof Rack


Installed these with timberline mounts to factory side rails on a 4Runner. The timberline mounts provided an extra 9” of length, over the factory crossbar spread. The aluminum section of the jetstream bars is 70”. The additional plastic caps make the oal a little over 72”. So far it works well to carry two paddle boards side by side. The cross bars are the width of the body panels and haven’t hit my head yet. etrailer shipped quickly. Customer service was great! Spent about 30 minutes on hold to talk to someone, but Kayla was super helpful, and well informed. Worth the wait.


39
292
Show More Reviews

See what our Experts say about this Yakima Roof Rack




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Test Fit:
Hayden R
Employee Savanna B
Test Fit:
Savanna B
Employee Wilson B
Updated by:
Wilson B
Employee Carrie F
Updated by:
Carrie F
Employee Daron K
Written by:
Daron K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.