1. Roof Rack
  2. Yakima
  3. Fit Kits
  4. 4 Pack
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4

Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4

Item # Y00245
lowest price pledge
Retail:$142.99
Our Price: $126.00
You Save: $16.99
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 2 lbs
Quantity: 
In Stock
Yakima Roof Rack - Y00245
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Custom-fit Landing Pads attach to the fixed mounting points in your vehicle's flush, factory side rails. The pads create mounting points for Yakima Skyline or Control towers. Lowest Prices for the best roof rack from Yakima. Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 part number Y00245 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (102)
  • Q & A (39)
  • Videos (8)
  • Photos
  • Why etrailer?

Yakima Roof Rack - Y00245

  • Yakima
  • Fit Kits
  • 4 Pack

Custom-fit Landing Pads attach to the fixed mounting points in your vehicle's flush, factory side rails. The pads create mounting points for Yakima Skyline or Control towers.


Features:

  • Provide mounting points for Yakima SkyLine or Control towers (sold separately)
    • Pads install in the fixed mounting points inside your vehicle's flush, factory side rails
  • Protect your vehicle from scratches with UV-resistant, rubber base pads
  • Include snap-on covers for protection when towers are not in place


Specs:

  • Quantity: 4 pads
  • Limited lifetime warranty


8000245 Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4

Installation Details Y00245 Installation instructions



Video of Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Yakima Roof Rack Review - 2017 Honda CR-V

Speaker 1: Today on our 2017 Honda CR-V, we're going to be test fitting the Yakima JetStream roof rack system. This is going to be consisting of part numbers Y00425, these are the JetStream crossbars. Part number Y00148, these are the SkyLine Towers, and they kind of snap into place with our landing pads. And the landing pads are going to be part number Y00245. This is specifically for the Honda CR-V.It attaches to two pre-attachment points on the actual flush mounted side rails of your CR-V, and these bars are designed to work with a wide variety of accessories. This helps you put anything you don't want inside the vehicle, outside, or just to free up a little bit more space if you need to.

It can work with bike racks, cargo baskets, or cargo boxes, and the general shape of the bars is going to be an aerodynamic shape. That's going to help cut down wind noise and drag while you drive.Moving our end cap here, this also works with T-Track accessories, but unlike the others, you actually just push down the strip at the top here so the T-Track accessory just slides in there that way. A lot of the other styles out there, you'll have to remove the strip, cut it to length, and kind of go through a hassle to get this installed, and this eliminates that for you.At the ends here, we do have these plastic locks that can be taken out and removed, and replaced with the Yakima SKS lock system, so you can secure this to your vehicle and also make inaudible 00:01:28 with your accessories that you're hauling. And, once everything is finished with your trip, these just can pop out of place by opening the ends and we have these plastic pieces that fit on top here, so you don't have to remove the mounts, and they're ready to go for next time.Now that we've shown you how this looks here, let's go ahead and show you how it actually installs. We have our rear bar partially assembled on our table here.

We'll go through the process of installing it onto our vehicle. We have the bar and the towers applied on one side, so our next step is we're going to go to the tower here as well as the fit kit for our actual bar, and install that on the other side.Starting with our plastic piece here that just pushes in place on top of our tower until you hear a light click. Then we'll take our metal piece here, which attaches to this screw on the inside. Then you tighten that down with the included tool. You're going to hear two or three audible clicks once this is done, like so.

Then we can slide this into the bottom of the bar. Then our final step is putting in our end cap.Now we can move on to our actual mounting point here. We'll take the padded portion and these points here will fit into the holes in the bottom. Just kind of match up. Then just push them into place like so.

Then we'll take the screws and the flat washers and install them onto our fixed mounting points onto our flush mount side rails. Find our points, and find the proper configuration, too, that works best for your vehicle. We'll get these finger tightened first. Then we use the tightening tool and finish them off.Now we can take our bar and set it into place as well, making sure that they're open all the way. We'll set them into our cradles. Our landing pads, I should say. And then we'll get the crossbar overhang figured out as well. You're going to want to make sure that that's even on both sides. Have to loosen it up just a little bit. And try not to do that. There we go. All right, that looks good. Our final step is to tighten down the bolt in the center here. This is going to tighten up the tower to our bar. That's done. Close this up, and that'll lock it to the landing pad, and repeat this on the driver's side as well.Next, I'm going to give you a couple quick measurements here that'll help you out in regards to the height that it's going to add to your vehicle. We're going to start in the center of the roof and measure to the bottom and the top of the bar. From the center to the bottom, it's going to be about five inches. From the center to the top, it's going to be about five and seven eighths inches, so that's adding quite a bit to the top of your roof, so keep that in mind when you have your bike racks and your cargo baskets fully loaded when you're pulling it into your garage. And this roof rack system does have 165 pounds of carrying capacity once installed, but you always want to double check with your vehicle's manual and go by its recommendations, and go by the smaller of the two numbers. And there you have it for the Yakima JetStream roof rack system on our 2017 Honda CR-V.


Customer Reviews

Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 - Y00245

Average Customer Rating:  4.8 out of 5 stars   (102 Customer Reviews)

Custom-fit Landing Pads attach to the fixed mounting points in your vehicle's flush, factory side rails. The pads create mounting points for Yakima Skyline or Control towers.

- Y00245
by:

Great service! 915335



- Y00245
by:

Stacey was very helpful to ensure I ordered the right part for my vehichle. Excellent customer service! 895220



- Y00245
by:
Ford Explorer

Yakima Towers and Pads arrived on time and all in order. Service was extremely fast and the price was better than every other site I looked through. 831202



- Y00245
by:

Yakima Landing pads are vehicle specific. Good quality mounts are supplied with good stainless steel fasteners. Required as a base for the towers. 828267



- Y00245
by:
2018 Honda Pilot

I like the strength of the Yakima brand and it looks great. It does seem a bit more complicated than might be necessary. I know they have to fit to many different cars but the matching of components is confusing and the installation less than intuitive. The end result is great and etrailers is awesome in every way! 756559



- Y00245
by:
2017 Honda Pilot

Yakima racks are always a good choice. Etrailer made it easy for me to know all the parts I needed and it was so easy to install! 612863



- Y00245
by:
2019 Buick Enclave

Great service. Solid product. 592786



- Y00245
by:

The system fit perfectly. Thank you! 554260



- Y00221
by:

Review from a similar LandingPad in Roof Rack


Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash. Will definitely be doing business with you all again. 97523



- Y00244
by:

Review from a similar LandingPad in Roof Rack


Amazing quality easy set up fast shipping buy the locks the 4 pack With this fast shipping super impressed 698076



- Y00244
by:

Review from a similar LandingPad in Roof Rack


Easy to install. Not impressed with the fit though. The biggest selling point is being able to remove the towers and leave the pad though. Overall happy with the purchase. 523534



- Y00221
by:

Review from a similar LandingPad in Roof Rack


It says 4 pack on the item description and I got 2? And now there is no reply from etrailer about my inquiry. Is there really someone sending me a request to review this or is George J a computer ? 418906


Comments
Thank you for taking the time to submit your review and we appreciate your business. I apologize for the delay in responding, but I can assure you that reviews are viewed by real people. I see that customer service was able to help you and we hope that you will continue to use etrailer.com in the future.
-- Laura E - 08/19/2017

27385

- Y00221
by:

Review from a similar LandingPad in Roof Rack


Delivery was fast and efficient. Everything arrived in good shape with excellent feedback from the website. Have always had a great experience with etrailer.com 643503



- Y00221
by:

Review from a similar LandingPad in Roof Rack


Product worked well with my already installed Yakima rails and the towers attached to bars that I use on another vehicle. Easily installed. Now I can switch the kayak carrying Yakima bar and tower rigs from one vehicle to the other with minimal effort. 494644


Comments
Just fine!
Clifford T - 04/10/2019

52761

- Y00227
by:

Review from a similar LandingPad in Roof Rack


I recently purchased a rack system for my 1979 Ford Bronco to haul our new Kayaks. And believe me it was not easy to "fit" a vehicle as old as this. I had some interesting challenges - my truck has a 3" lift and only clears my garage entrance by about 1.5 inches, so whatever I got had to be easily removable (at least in the front). I also wanted it to be multi functional so that I could carry other stuff as well, and the Yakima/Thule systems are great for that. Lastly, I wanted whatever I put on the truck to look good as I have put a lot of time and $ into fixing up this old truck and I didn't want it to look cheezey..... Thanks to the good folks at etrailer I ended up with somewhat of a hybrid approach (my choice) but it worked out exactly as I envisioned it. I purchased the Thule Xsporter Pro system for the rear which works well with only minor modifications to the truck. I can lower it easily so I can get the truck into the garage without removing the system altogether. I really like that the tailgate is still functional with the system installed as some others I had in mind were bumper or hitch attached and would not allow use of the tailgate.... And, lastly it looks nice enough to just leave it on all the time. On the front I chose the Yakima JetStream cross bar held up by a pair of Yakima SkyLine Towers and Landing Pads which I chose because I can easily remove the crossbar/towers to get the truck into my garage. The Landing Pads have covers for when not in use and are small enough to not be too noticeable. I also added the security locks for peace of mind. I have added 3 pictures, the first shows the Landing Pads without the towers & crossbar. You can also see the Xsporter Pro on the rear in its lowered position. The 2nd shot is a closeup of the Skyline Tower. The 3rd picture shows the entire system installed ready for my kayaks (or whatever). Thanks again to the folks at etrailer for their expert advice and customer service. 408198



- Y00244
by:

Review from a similar LandingPad in Roof Rack


917003



- Y00242
by:

Review from a similar LandingPad in Roof Rack


899179



- Y00242
by:

Review from a similar LandingPad in Roof Rack


899177



- Y00244
by:

Review from a similar LandingPad in Roof Rack


Perfect replacement and fast shipping ! 884003



- Y00221
by:

Review from a similar LandingPad in Roof Rack


882725



- Y00242
by:

Review from a similar LandingPad in Roof Rack


fit great 877335



- Y00221
by:

Review from a similar LandingPad in Roof Rack


This company is great! I was looking everywhere for a set of crossbars that would fit my pop up camper. After not being satisfied with the options I called the customer service line and spoke with Crystal. She was great at recommending which parts would work on my camper. I had a lot of questions and she answered them all. If she didn't know the answer she found out for me. I installed my new crossbars on my camper this afternoon and they fit perfectly! They're solid as a rock! I'm so excited to use them! 863989



- Y00239
by:

Review from a similar LandingPad in Roof Rack


Subaru stock roof rack was too low to accommodate a Roofnest. These landing pads towers work great and hold the Roofnest very tight when driving down the highway. 857584



- Y00234
by:

Review from a similar LandingPad in Roof Rack


The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always. 853065



- Y00233
by:

Review from a similar LandingPad in Roof Rack


Parts were shipped the same day as I ordered them and arrived 3 days later -- 2 days sooner than the estimate. Everything fit as advertised. I couldn't be more satisfied. 852052


31
109
Show More Reviews

Ask the Experts about this Yakima Roof Rack

  • Buying ONLY The Yakima Landing Pad 19 For A 2017 Cadillac XT5
    Yes, if you bought the part # Y00245 that will come with just the landing pad! If you have all the other Yakima components # Y00421 and # Y00148 you will be good to install! Check and see if you have I've included an install video for you!
    view full answer...
  • Roof Rack Recommendation for 2017 Chevy Bolt with Factory Flush Rails
    Yakima offers a roof rack for your 2017 Chevy Bolt with factory flush rails. For the landing pad you'd want the Yakima Landing Pad 19 part # Y00245, for the feet you'd want the skyline part # Y00148, and then for crossbars part # Y00425.
    view full answer...
  • Roof Rack that Fits 2019 Cadillac XT4 with Raised Side Rails
    Yakima has a roof rack fit for your 2019 Cadillac XT4 with side rails with the part numbers # Y00245, # Y00148, and # Y00425 which will give you the very aerodynamic JetStream style of crossbar that will minimize wind noise! The bars also have top channels which makes attaching accessories easy as well.
    view full answer...
  • Parts Needed to Install Yakima Roof Rack on 2017 Honda CR-V with Naked Roof
    Thanks for the pictures and description of the roof of your 2017 Honda CR-V. The correct Yakima Jetstream roof rack would be the part numbers # Y00425, # Y00146, # Y06188, and # Y06189. I attached an install video on a similar CR-V as yours for you to check out as well. This attaches to the fixed points on your roof.
    view full answer...
  • Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
    The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y00146.
    view full answer...
  • Can 53" Thule WingBar Evo Crossbars be Used for a Roof Rack on a 2019 Honda CR-V
    There is a chance that the 53" Black # TH711420 or Silver # TH711400 WingBar Evo Crossbars will fit on your 2019 Honda CR-V but since the WingBar Evo crossbars have limited mounting space on the bottom side (see attached) it is hard to say if the 6" longer bars will fit. If you are really wanting the WingBar Evo system then I recommend using the 47" Black # TH711220 or Silver # TH711200 Crossbars with the Podium Feet # TH460R and the Fit Kit # THKIT3166. If you are really wanting to...
    view full answer...
  • Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
    Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with...
    view full answer...
  • Roof Rack Recommendation for a 2016 Ford Explorer with Sunroof and Roof Rails
    The weight capacity of most of the roof racks is 165 pounds but you're going to be limited by the capacity of your Explorer's roof. I took a look at an online copy of your owner's manual and it states that you're limited to only 45 pounds with the moonroof. Check your printed copy to verify. If it's correct then you'll only be able to carry about 30 pounds on a roof rack because most racks are roughly 15 pounds or so. If you can carry kayaks on your 2016 Ford Explorer that has flush...
    view full answer...
  • Roof Rack and Kayak Carrier Recommendation for 2020 Buick Envision with Flush Rails
    For your 2020 Buick Envision the Yakima JetStream roof rack part numbers # Y00425, # Y00148, and # Y00245 is what I recommend as your best choice. This rack attaches to the flush rails you sent in a picture of and gives you an aerodynamic roof rack that will minimize wind noise while also being easy to install and very solid/high quality. Then for a kayak carrier we have the Thule HullaPort XT # TH848 that I would recommend highly. It is folding, padded, and easy to load and install....
    view full answer...
  • Recommended Roof Rack for a 2019 Chevy Bolt EV with Flush Mounted Rails
    Out of the available selection for your 2019 Chevrolet Bolt EV I recommend using the Yakima roof rack. This gives you the aero-style bars for a contemporary look while keeping the 165 lb weight capacity that is the typical max rating for roof racks. This roof rack consists of the 50" JetStream Crossbars # Y00428 Silver or # Y00425 Black, the SkyLine Towers # Y00148, and the Landing Pad 19 # Y00245. I also recommend installing the Yakima SKS Lock Cores # Y07204 to deter theft of your...
    view full answer...
  • Does Thule Motion XT Rooftop Cargo Box - 22 Cubic Feet - Fit 2020 Cadillac XT6
    So long as you have a roof rack on your 2020 Cadillac XT6, your vehicle is absolutely compatible with the outstanding Thule Motion XT Rooftop Cargo Box - 22 cu ft # TH629906. If your 2020 Cadillac XT6 does not have a roof rack, I highly recommend a Yakima rack because it will give your XT6 a roof rack that is strong, quiet, and help give your Cadillac a distinguished look. The exact parts you need for a Yakima rack on your '20 XT6 are the following: - Yakima JetStream Crossbars -...
    view full answer...
  • Roof Rack for 2017 Ford Explorer Compatible With Thule Hullavator Pro
    There is a roof rack for your 2017 Ford Explorer that is compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898, although the 53 inch bars of the Rhino-Rack system are not going to be quite long enough to work. Due to that, in order to get long enough bars you will need to go with the Yakima roof rack. The reason is due to how crossbars mount; they foot pack that attaches to the bars slides into a channel underneath the crossbars. That channel on the Rhino-Rack...
    view full answer...
  • Can Yakima Q Clips and Towers From 2016 Honda CR-V be Used on 2018 Honda CR-V
    I checked with Yakima and found that you will need a new set of towers and clips for your 2018 Honda CR-V. It looks like there was a generational change for the CR-V starting with the 2017 model that required a new fit for the roof rack hardware. You will be able to transfer your existing round crossbars to the new vehicle if desired. If your 2018 CR-V has a completely naked roof you will need # Y00146 for the BaseLine Towers, # Y06188 for the Front BaseClip Fit Kit, # Y06189 for the...
    view full answer...
  • 70 inch Aero Crossbar Roof Rack Recommendation for 2017 Honda Pilot Elite with Flush Rails
    I have a solution that will give you 70 inch long aero shaped crossbars on your 2017 Honda Pilot. What you'll want is the Yakima CoreBar roof rack that consists of part # Y00423, # Y00148, and # Y00245. Yakima either has 60 inch or 70 inch bars so since you needed 65 inch at least 70 seemed to be the best choice.
    view full answer...
  • Roof Rack for 2021 Chevy Trailblazer that Does Not Require Drilling
    The Yakima round bar roof rack # Y00408, # Y00148, # Y03536, and # Y00245 that fits your 2021 Chevy Trailblazer with a naked roof does not require any drilling to install as it attaches via fixed mounting points on the roof. I attached a picture that shows how the rack attaches to your roof as well.
    view full answer...
  • Recommended Roof Rack for Tent on 2019 Ford Explorer
    Adding a roof rack with horizontal crossbars to your 2019 Ford Explorer will be required to not only support the weight of the tent and its occupants but also to protect your vehicle's roof. With that being said there is not a roof rack available that features a 600 pound capacity, as they all will still be limited by the capacity of the vehicle's roof, which looks to be 165 pounds on your Ford Explorer. Most roof tents though, such as the Yakima SkyRise Tent # Y07437 that we have available,...
    view full answer...
  • Recommended Roof Rack for 2019 Acura MDX
    For your 2019 Acura MDX I recommend the Rhino-Rack aerobar roof rack as long as you have a naked roof. The bars are available in black, # RRVA137B-2, and silver, # RRVA137S-2. You also need the legs # RRRLKVA and fit kit # DK400. The Rhino-Rack is a good aerodynamic system that reduces wind noise, looks nice, and doesn't break the bank. It includes locks in the legs and plastic locks in the bars that can be upgraded to metal using part # RRVA-LEC4. I've attached a link of a video...
    view full answer...
  • Best Roof Rack With Silver Crossbars For 2020 Buick Envision With Flush Mount Rails
    I recommend the Yakima JetStream Crossbars in silver part # Y00428, the SkyLine Towers part # Y00148 and the Landing pads part # Y00245 for the 2020 Buick Envision with flush mount rails. The JetStream cross bars are designed with a top channel for accessories compared to the Corebar that is not designed with a T-slot so they are not as versatile. They are also designed with a bottom channel with a rubber strip to cut down on wind noise. I have attached an installation video for your reference.
    view full answer...
  • High Capacity Roof Rack Recommendation for 2017 Honda CR-V for Off-Road Application
    For an off-road application there's only one roof rack I can recommend for your 2017 Honda CR-V with flush rails and it's the Yakima HD roof rack part # Y01156, # Y00148, # Y03541, and # Y00245. This rack has a 500 lb capacity and sits far enough off of the roof of the vehicle (see picture) that you'd never have to worry about flex in the bars. You should note that the capacity of this rack is not the capacity of your roof. You'd still be limited by the weight capacity of your roof but...
    view full answer...
  • Proper Cargo Box with Hatch Clearance for 2017 Acura MDX
    You've got two great options for your box. Yakima's Rocketbox Pro 11, part # Y07193 and Rocketbox Pro 14, part # Y07192. These boxes both require 45 inches of clearance to use on your roof. The two largely share features, such as dual side access, an easy to use mounting system and the capability of handling your 172 centimeter skis, but have a few differences in terms of size and capacity for non-ski uses. If you're primarily concerned with transporting the skis and no other real...
    view full answer...
  • Yakima CoreBar Roof Rack Recommendation with 60 inch Crossbars for 2017 Ford Explorer
    If you wanted to use the 60 inch CoreBars part # Y00422 that you referenced on the roof of your 2017 Ford Explorer you could. You'd need the towers part # Y00148 and the landing pad # Y00245 and you'd be set. Since the CoreBars use a sleeve that can slide up and down the bar easily as the attachment point you can go with a longer bar and not have to worry about fit issues.
    view full answer...
  • Thule AeroBlade Podium Roof Rack with Longer Bars for 2017 Ford Explorer
    It is possible in some cases to substitute longer-than-recommended roof rack crossbars in a roof rack setup. But do note that bars that extend out past the roofline can pose a safety issue - head bumps happen. That said, the various roof racks made for your 2017 Ford Explorer that has flush mounted rails that run front to back DO come in different crossbar lengths ranging from 48-inches with the Yakima round bar system (parts # Y00408, # Y00148, # Y03536 and # Y00245) up to 54-inches...
    view full answer...
  • Platform Rack for 2021 Honda Pilot With Flush-Mounted Rails
    There is one option for a platform rack that will fit your 2021 Honda Pilot with flush-mounted rails, and give you the off-road look and capability you want. And it will not interfere with your sunroof either, so long as the sunroof retracts into your roof as opposed to jutting upwards. The rack that fits your '21 Pilot is from Yakima and is made up of the following: - Yakima LockNLoad Platform Roof Tray # Y05045 - SkyLine Towers # Y00148 - LockNLoad SL Adapter # Y05042-2 - Landing...
    view full answer...
  • High Capacity and Aerodynamic Roof Rack Recommendation for 2019 Honda Pilot
    For a quiet and higher capacity roof rack for your 2019 Honda Pilot for carrying a roof tent the Yakima HD roof rack part numbers # Y01156,# Y00148, # Y03541, and # Y00245 is the way to go. The bars are aero shaped for quietness and also have the highest weight capacity as well.
    view full answer...
  • Availability of Foot Pack for Inno Dual Angle Carrier for 2018 Acura MDX with Factory Side Rails
    I do have a solution for you to use the Inno Gravity Ski and Snowboard Carrier # INA951 on your 2018 Acura MDX but Inno doesn't have a fit kit that allows you to mount the (discontinued) Inno Dual Angle Ski and Snowboard Carrier INTX726 on your vehicle. For the Inno Gravity you need a roof rack. I recommend going with the Yakima CoreBar roof rack because it gives you the high-end aero-style crossbars but they are at a lower price-point than the aluminum crossbars. For this you need the...
    view full answer...
  • 60 inch Crossbar Roof Rack Recommendation for 2020 Honda CR-V
    If you went with a Yakima corebar setup you could install a 60 inch aero bar rack. So for that you'd want the SkyLine Towers # Y00148, Landing Pad 19 # Y00245, and 60 inch bars # Y00422 and you'd be set! This attaches directly to your flush roof rails. I attached an install video for a similar corebar roof rack on a 2016 Honda CR-V for you to check out as well.
    view full answer...
  • Recommended Roof Rack and Cargo Box for 2020 Chevy Bolt EV with Factory Flush Mounted Rails
    For your 2020 Chevrolet Bolt EV with flush mounted rails, I recommend the extremely quiet and low profile Yakima JetStream Crossbars # Y00425. To install these on your roof, you also need a set of SkyLine Towers # Y00148 and Custom Fit Landing Pads # Y00245. The JetStream Crossbars are full length (50 inches) and have a capacity of 165 lbs, so the Yakima roof rack actually provides the most space and strength of any other roof rack system available for your Chevy Bolt. There are a few...
    view full answer...
  • Fitting a Cargo Box to a 2016 Acura MDX
    You have a couple of options for this situation. Prior to any changes, I'd take a minute and get the full clearance that you have on your vehicle. To get this, you'll measure from the center of the front bar to the line where your roof meets the hatch. This is your available clearance, and your roof boxes will need to have a clearance requirement of less than this measurement to fit. You can check the measurement of your Evolution box by measuring from the center of the rear mounting...
    view full answer...
  • Roof Rack, Basket and Kayak Carrier Recommendation for 2018 Jeep Compass with Flush Rails
    Thanks for the picture of the flush rails you have on the roof of your 2018 Jeep Compass. For a roof rack to fit your vehicle the Yakima Corebar Crossbar Rack part # Y00421, # Y00148, and # Y00245 is what I recommend. This rack gives you an easy to install rack with aero shaped bars which means you'll experience minimal wind noise from the rack. Then for a roof basket the Yakima LoadWarrior part # Y07070 would fit well and since it's 39 inches wide it would allow you to also fit a kayak...
    view full answer...
  • Roof Rack for 2019 Cadillac XT5 Platinum
    In regards to vehicles that have a trailer hitch - which would be put on at the factory - some of them can be removed, but some are welded on, and there is unfortunately no way for us to know which vehicles have welded hitches. Additionally, there is not a fit for a trailer hitch fit for a 2019 Cadillac XT5 Platinum which would allow you to replace it. The roof rack is another story and that can be removed on a '19 XT5 Platinum. The roof rack on this vehicle (which I checked out and...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Zack K
Test Fit:
Hayden R
Video by:
Andrew K
Video by:
Jonathan Y
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Written by:
Daron K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.