To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This aerodynamic roof rack mounts flush on your roof for a factory look. Crossbars with push-down rubber strips in top channels work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.
Features:
Specs:
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today at our 2014 Toyota Corolla we are doing a test fit of the Inno Aero Bar Roof Rack. The Crossbar numbers are INXB100-2. The Flush Feet are INXS200. The custom fit pad and clamp are INK306. We have the first one already on, I'm going to show you how to install the second one. This is our crossbar, we have 1 and 1/2 of the feet already on.
This is the feet, the clamp, and the pad. This is the adapter for the crossbar to put on our feet. There we're 2 covers and the tools that actually come with the kit itself. The first thing we're going to do is put this adapter on. We need to bring this all the way out, and it has a little notch here that actually fits here, so bring it up like that and slide it back in. Now we take our foot, this little knob here is going to fit inside there, that one's going to fit there and the screw is going to eventually go into there.
Set it on there like so, pull it out . Take our Allen wrench here, this tightens up this bolt. Get that nice and tight. Then we put on our pad, as you can see it has the screws imprint on there so that's the way you want to put it on. Put that on like so.
Then we need to take our clamp and what we need to do is inaudible 00:01:52 all the way out . Set the nail like so. We are ready to put it on our vehicle. I'm going to set this out of the way for a second and open up our doors. Set it up there like so. Make sure this side is on there also.
Now I need to take a measurement after I get this one inaudible 00:03:25. Now the measurement will be 17 and 1/4 inch from the middle to here. Move it out just a little bit. That's pretty much there. Now we need to do the other side. We are pretty much there. We're going to go ahead and take our other tool, tighten it up, we can put on our covers and be on our way. The good thing about Inno Aero Bar Roof Rack here; the tool actually tightens itself so once you hear it click, you should be done. You don't want to go no more than when you hear the click because it'll be tightened enough. We're going to keep going, kinda switch to both sides, don't want one side to pull at the other. It's pretty much getting tight, so you should pretty soon hear (click) there's the click. As soon as you hear the click you don't want to go any further than that. Now we can put our covers on. Put the cover on there, go on the other side and finish that one up. Now the good thing about the Inno Aero Bar is you can find the other accessories on their web site such as bike racks, surf and paddle board carriers or even kayak carriers. We got them all locked up; we're ready to go. That's going to complete our look at the Inno Aero Bar Roof Rack on Today's 2014 Toyota Corolla.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.