To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has a built-in C-channel for mounting legs, and the kit includes endcaps and installation hardware.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's going on, everybody Adam here with etrailer. Today, we're gonna be taking a look at this really cool track system. It is the Rhino-Rack RT-Style roof rack track system. Some vehicles, we don't have the option to put a roof rack on the roof. Kind of like our Odyssey, we have here. Usually it's because of sliding doors, but there are some other instances, where we aren't gonna be able to put a roof rack on here.
But with these rails, it's going to allow us to do that. We can do a two-bar setup, to get a lot of accessories on our roof. With the Rhino-Rack kit, we have two different cross bars to pick from, and two different colors for each. Or we can just go with the arrow cross bars. It's gonna be a little bit quieter up on your roof, a little bit more aerodynamic.
And then, we're gonna have the HD bars as well. So pick whichever ones you think is gonna be best for you. In my opinion, the arrow bars are typically the ones that are gonna work with most of your accessories. On the one side, we're gonna have an open little slot, so we don't have to remove anything, to put in our accessories. And with our towers that we're using, for the arrow bar system, all of your accessories are gonna slide in this little end cap here.
So you don't have to remove anything, which is nice. And it goes all the way along the whole entire track. So you really find out exactly where you wanna put your bars. And it's gonna accept a block that is about 1 inch by 13/16 of an inch. The Rhino-Rack system is awesome, when it comes to taking your towers and your crossbars off.
All you need is your key. You're gonna unlock this, and look at that. All you gotta do is pull these in, pull this out, and we're gonna have a little end cap here. If you wanted to take these off, all you have to do is just take the little tool, loosen it, and slide it all the way off. But I do not mind having these on here, cause it's gonna be a lot quicker than your other option, which is Thule. The Thule ones, the towers are gonna take a little bit longer to take off, but they won't leave this little bottom section. So that's kind of all up to you. I like having these here, just because it makes for adjusting the whole entire roof rack a lot quicker. And also, I just don't mind the look. I think it kind of looks cool. So, if I we're to go with one of the two kits, you have an option for, whether it's a Thule or the Rhino-Rack, I would definitely go with the Rhino-Rack. So if we wanted to go back to the bare track system, it would just loosen it up, and then you can just go ahead and slide it out and we're done. So, I think that's also gonna be quicker, than the Thule option, which is why I really like the Rhino-Rack. Of your two options, both the Thule and the Rhino-Rack, the track system is gonna be a flat black. Which I think that's the best looking, in my opinion. I don't know if it's just because of our white car, but it does look really, really good. And that's pretty much it, for a look at the Rhino-Rack RT-Style roof rack track system..
Average Customer Rating: 4.9 out of 5 stars (22 Customer Reviews)
These tracks mount directly to your naked-roof vehicle to create strong, low-profile attachment points for Rhino-Rack roof-rack legs. Each track has a built-in C-channel for mounting legs, and the kit includes endcaps and installation hardware.Quality product, great price.
Review from a similar RT in Roof Rack
Super solid track system and looks great. Good instructions, I followed them to a T, including purchase of metric bits and punch. Specific to my Nissan Frontier crew cab truck. A little nerve racking drilling 18 holes in the roof but turned out fine. No leaks. Works great with my Yakima landing pads and rack. No interference with sunroof components in the roof. I used a butyl mastic tape in place of the recommended sealant as it wasn’t available in the US. Nice folks at etrailer helped me with that! I probably didn’t need to but I smeared a bit of silicone on top of every rivet head inside the track once it was installed. The end caps fit nice and flush on the roof unlike the Yakima end caps that will have a gap if there is any curvature in the mounting surface.
Review from a similar RT in Roof Rack
I bought these racks for my Ford Transit and I couldn't be happier with the racks or the service from trailer. The rhino racks added a nice touch to an awkward looking van with its great looks and perfect functionality. Reading reviews about other racks making howling noises while driving made me a little hesitant , but am pleased to say, no noise whatsoever. I've added a basket to the racks and everything has worked perfectly. We do a lot of traveling,(2 adults,4 kids, 3 dogs) and the racks have provided exactly what we needed. Thanks etrailer for the best price and great service
Review from a similar RT in Roof Rack
I don't use it as often as I would like but after a year it is still attached and works as intended. The rubber strips to reduce noise came partially loose, but with some fiddling they seem to be hanging in there now. For my vehicle at least, I used a professional (local auto shop) to install as I was not going to take a drill to my car.
Review from a similar RT in Roof Rack
The entire rack system (tracks, feet, aero crossbars, ladder straps, and load stops) installed and worked great for the intended use. Also, the service from etrailer was excellent.
The only drawback to this system is the necessity of purchasing a pneumatic rivet gun ($40) for mounting the tracks, but hey, it's a custom rack and i ended up with a cool tool.
Thanks.
Review from a similar RT in Roof Rack
sturdy, coated steel or stainless 5mm (3/16) rivets included to reduce corrosion chances.
problem encountered: air riveter required (readily available to borrow or purchase ) due to strength of rivets , the problem is all common rivet guns are too large in diameter to fit into the rail "valley" so the tip is flush with the surface of the hole which is required for proper fastening. In some rhino rack instructional videos these are clearly made with enlarged spaces to fit rivet gun . are these really rhino rack or knock off ? bad production run ? I solved the problem because I have access to a machine shop and was under time pressure due to a planned trip but most customers would be in a mess with no way to solve this issue.
that said , after several extra hours of effort I successfully mounted the rails and new pioneer rack and roof top tent on my naked metal roof and i am happily able to go down the road.
ps
Shiela was wonderful! fantastic customer service ,all other rhino products received from e trailer were great, e trailer was speedy and very helpful!
Review from a similar RT in Roof Rack
Good product - did exactly what I needed it to.
Review from a similar RT in Roof Rack
Easy to install and works great!
Review from a similar RT in Roof Rack
Excellent rails. Rugged, better than OEM Rover rails by a vast margin and etrailer is awesome. Great service, prices and shipped fast/well. Thank you!
Review from a similar RT in Roof Rack
great, service was very responsive and hands on, they don't make it a mystery. Very helpful in solving my problem, roof rack. They really found the solution, spending time reserching for the correct product. Thanks
Review from a similar RT in Roof Rack
I needed to get this order delivered on a tight schedule, and etrailer came through for me. Everything as ordered and delivered quickly. Great buying experience (as usual)
Review from a similar RT in Roof Rack
Drove over the mountain to go biking last weekend and it did a great job. I will definitely recommend it to family and friends.
Review from a similar RT in Roof Rack
Outstanding finish. Super strong
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
had to drill the hole to clean out the powder coating to get the rivet to go into the hole
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
Review from a similar RT in Roof Rack
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.