Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2

Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2

Item # RLTF

lowest price pledge


Our Price: $108.90

You Save: $12.10
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 1.83 lbs

In Stock, Ships Today
Roof Rack RLTF - 2 Pack - Rhino Rack
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

  • Rhino Rack
  • Feet
  • 2 Pack
  • Anti-Theft Hardware
These 3" tall legs are perfect for adding a third crossbar to your Rhino-Rack RTC- or RT-style roof-rack tracks or simply building a roof-rack system from the ground up. Legs mount to tracks with barrel nuts, and they include security bolts. Lowest Prices for the best roof rack from Rhino Rack. Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2 part number RLTF can be ordered online at or call 800-298-8924 for expert service.

  • All Info
  • Q & A (23)
  • Photos
  • Why etrailer?

Rhino Rack Roof Rack - RLTF

These 3" tall legs are perfect for adding a third crossbar to your Rhino-Rack RTC- or RT-style roof-rack tracks or simply building a roof-rack system from the ground up. Legs mount to tracks with barrel nuts, and they include security bolts.


  • Enable you to add a third crossbar (sold separately) to an existing roof-rack system or build an aftermarket system from scratch
    • Compatible with Rhino-Rack Heavy-Duty square and Aero oval crossbars
  • Mount with included barrel nuts into the channels on your Rhino-Rack RTC- or RT-style tracks
    • Tapered wedges included so that crossbar remains level on sloping surfaces
  • Position anywhere along the tracks to accommodate different-size loads
  • Include built-in security hardware that deters theft - leg bolts require special tool (included) to loosen
  • Constructed of UV-resistant, glass-reinforced nylon


  • Quantity: 2 legs
  • Leg height: 3"
  • Application: Rhino-Rack RTC- and RT-style roof-rack tracks
  • Limited lifetime warranty

RLTF Rhino Rack RLTF Roof Rack Legs for RT and RTC Tracks - 3" Tall - Qty 2

RLTF Installation InstructionsInstallation Details RLTF Installation instructions


Ask the Experts about this Rhino Rack Roof Rack
Do you have a question about this Roof Rack?

  • Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  • I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
    view full answer...

  • Rhino-Rack Roof Rack for a 2018 Mercedes Sprinter 2500 High Roof with No Factory Roof Rack
  • Rhino-Rack actually recommend the RT tracks, # RTS514, for your 2018 Mercedes Sprinter 2500 with naked roof. The tracks are compatible with certain leg styles. The legs hold the crossbars and while the tracks will accept different leg styles Rhino-Rack recommends RLTF legs # RLTF with crossbars # RB1800. These tracks will attach to the factory anchor points on the vehicle which means the installation is not as invasive as it could be on other vehicles that do not have anchor points.
    view full answer...

  • Roof Rack Recommendation for a 2004 Fleetwood Bayside Pop Up
  • The SportRack Pop-Up Camper Roof Rack # SR1020 that you referenced will require drilling into the roof of your vehicle to install. The brackets are designed to sit on the edge of the roof of the camper and get bolted there. Without knowing what tracks you have on your roof or how far apart they are it would be hard to know if there is a roof rack foot that would fit them. If the tracks were like the part # RTS514 that are 1-1/2" wide x 1/2" tall you would be able to use the foot pack...
    view full answer...

  • Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  • You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
    view full answer...

  • How to Install the Rhino-Rack Pioneer Platform Rack on a Truck Cap
  • I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part # RR42108BF to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are different. The only way to attach this Pioneer rack to your truck cap would be to remove the crossbars you have now and install a Rhino-Rack Track System which is composed of part # RTC14, part # RLTF (2), and part # RB1375S (2). You would...
    view full answer...

  • Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo Van
  • I spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RTS514, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
    view full answer...

  • Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  • It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
    view full answer...

  • Can I Install Crossbars on a Pop Up Camper Roof
  • To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 3 leg options that...
    view full answer...

  • Aero Crossbars and Roof Rack Parts Needed to Mount a Roof Rack on a Truck Topper or Bed Sides
  • I do have a way that you can install aero bars on a truck bed topper or to the side rails of a truck bed but the Whispbar crossbars cannot be mounted this way. Tracks can technically be mounted to just about anything that you are willing to drill into including the bed sides. You could use Rhino-Rack tracks such as # RTC14 which are 55 inches long with legs # RLTF (sold in pairs), and aero crossbars. The crossbars come in various lengths and I have included a link to them for you. The...
    view full answer...

  • How to Use Roof Top Tent on Truck Bed with Tonneau Cover Installed
  • If the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or...
    view full answer...

  • Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood Bayside
  • Can you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
    view full answer...

  • Do Rhino-Rack RT-Style Roof Rack Tracks # RTS508 for 2012 Range Rover Sport Work with OEM Rack
  • If you installed the Rhino-Rack RT-Style Roof Rack Tracks # RTS508 on your 2012 Land Rover Range Rover Sport these are intended for use with Rhino-Rack track-mounted legs, including parts # RLTP, # RLTF or # RLT500. These tracks are not listed as being compatible with the Range Rover OEM roof rack so to confirm I checked with my technical contact at Rhino-Rack. My contact there also could not provide any assurance of compatibility of these tracks with the OEM roof rack. The RTS508...
    view full answer...

  • Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500
  • The Rhino Rack RT Style Tracks, part # RTS514 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack...
    view full answer...

  • Rhino-Rack Roof Rack with 3 Inch Tall Legs for a 2012 Land Rover Range Rover Sport
  • The RLTP legs are only available in 2 inch height. For 3 inch height you can use RLCP legs, # RLT500 or RLTF legs # RLTF. But for a 2012 Range Rover Sport you can use complete roof rack # RSPT508 which comes with 3 inch tall legs.
    view full answer...

  • Rhino-Rack Roof Rack Tracks for a 2017 Mercedes Sprinter 2500 High Roof
  • Since the Rhino-Rack tracks # RTS514 are sort of a universal product you would just have to make sure the length is appropriate for the available space on the roof of your 2017 Mercedes Sprinter 2500 with the high roof. These tracks are 87-1/4 inches long. If your Sprinter already has the factory tracks there are some direct fit options. I have included a link to them for you. If you want or need to use the tracks then for feet you can use # RLTF, # RLT500, or # RLTP. These are all...
    view full answer...

  • Will Rhino-Rack RLTF Roof Rack Legs Fit the Factory Tracks on a 2014 Mercedes Sprinter
  • On the Rhino-Rack Track Mount legs # RLTF the square nuts that fit inside the track channel are 3/4 inches wide. Measure the track opening at the bottom where it is the widest. It will need to be 3/4 inches wide or slightly wider to accommodate the RLTF legs. If the tracks on your 2014 Mercedes Sprinter match up then you can use bars # RB1800. If the tracks have different dimensions let me know.
    view full answer...

  • Roof Rack Recommendations for a 1994 Toyota Previa
  • If you do not mind drilling then I recommend a Rhino-Rack roof rack using Track Mount RLTF Legs # RLTF with leg adapters # RRVA-FK1-2, tracks # RRRTV148, and Vortex crossbars # RRVA126B-2. I have also included a link to the roof rack options we have for your Previa.
    view full answer...

  • Camper Shell Roof Rack for 2011 Toyota Tacoma Double Cab Longbed
  • We offer several lengths of Rhino-Rack's RT-Style Rivet-Mount Roof Rack Tracks including parts # RTS502 (58-1/2-inches) # RTS506 (67-3/4-inches) # RRRTS535 (87-3/16-inches) Other RT track lengths are available too. Once you find your preferred track length you can select two sets of Legs such as # RLTF and Rhino-Rack's Heavy-Duty Crossbars. The bars are also available in various lengths: # RB1120S (44-inches) # RB1250S (50-inches) # RB1375S (54-inches) It is a good idea...
    view full answer...

  • Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  • The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
    view full answer...

  • Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  • As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
    view full answer...

  • Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  • The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
    view full answer...

  • Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks
  • I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
    view full answer...

  • Roof Rack for 1993 Chevy Suburban with Naked Roof
  • The Rhino-Rack RT-Style Roof Rack Tracks like the 87-3/16" Long # RRRTS535 that you referenced are really universal items so there's no reason you couldn't install them onto the naked roof of your 1993 Chevy Suburban. Just keep in mind that it will require you to rivet through the vehicle's roof with the included hardware. You will need to supply your own rivet gun as it is not included. You can then use the Track Mount RLTF Legs # RLTF (quantity of 2) along with the Rhino-Rack Vortex...
    view full answer...

Do you have a question about this Roof Rack?

  • Why

    At we guarantee:

  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Tyler C
Updated by:
DeAnne T
Expert Research:
Michael H
Expert Research:
Jameson C
Photos by:
Jim W
Updated by:
Sarah W

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.