Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54" Long - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Using a Rhino-Rack Roof Rack to Go Off-Road on a 2016 Chevrolet Colorado
  The Rhino-Rack ROC25 Vortex # RR93GR is an aerodynamic, low profile rack. I verified with Rhino-Rack that the bars are just as strong as the Rhino-Rack heavy-duty racks, however since the bars fit directly into the feet and do not have any over hang there is more weight being forced directly down onto the center of the bars and less weight being distributed across them. For a more rugged roof rack I suggest the 2500 Heavy-Duty Rack that consists of the 54 inch crossbars # RB1375B-2, the...
  view full answer...
• Mounting Options for Rhino-Rack Fishing Rod Carrier RR576F
  The Rhino-Rack Fishing Rod Carrier # RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel of rack crossbars like # RRVA126B-2 and # RB1375B-2 using the included T-bolt hardware shown in the photo which slide into the top channel of such bars. Only if used in the heavy-duty Rhino-Rack bars is the Fit Kit # HD-FK1 needed. The standard...
  view full answer...
  
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• What Replacement End Caps do I Need for My Rhino-Rack Heavy Duty Crossbars?
  We definitely have them! The replacements you need for your Rhino-Rack Heavy Duty Crossbars like the # RB1375B-2 is the Replacement Endcap for Rhino-Rack Heavy-Duty Crossbars - Qty 1 # RRM002. It is important to note that each of these comes with a quantity of 1, so you will need to order 4 total.
  view full answer...
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Recommended Rhino-Rack Crossbars that fit a 2017 Ford C-Max
  I believe the measurement you're looking at is referring to the HD Bars # RB1375B-2 which you don't have, however I can say with certainty that the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars # RR25SR will fit your 2017 Ford C-Max just fine. The front crossbars measure 43-9/16" long x 3-1/8" wide x 1-3/16" tall, and the rear crossbars measure 41-3/8" long x 3-1/8" wide x 1-3/16" tall.
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• Roof Rack for 2014 Chevy Silverado 2500 that Could Have Tepui Tent Installed
  I looked up the Tepui Tents and they basically attach to roof rack crossbars like the Rhino Rack roof rack part numbers # RB1375B-2, # RRRLKHD, and # DK227 that you referenced. The only issue you may encounter is that this rack has a weight capacity of 130 lbs.
  view full answer...
• What Tie Downs Can I Use With The Yakima LockNLoad # Y05044
  The Ladder Pegs for Rhino-Rack Heavy-Duty Crossbars - 3" Tall # RSLP will not fit in the tracks of the Yakima LockNLoad Platform Roof Tray # Y05044, but I have something similar that you can use with the LockNLoad. The Ladder Pegs are made to fit in the rhino rack heavy duty crossbars # RB1375B-2. You can use the Yakima Eye Bolts # Y01162 with the lock in load on your 2019 Jeep Grand Cherokee.
  view full answer...
• Can Rhino Rack Square Bars Be Cut Down To Fit A 2014 Scion xB
  For a 2014 Scion xB we recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2, which are 54" in length. As for cutting down longer Rhino Rack square bars, which I don't recommend, you would need a miter saw with a metal cutting blade and could cut the bars to your specific needs. The end caps would need to be removed first so that you could add them on once you finish cutting. You'll also want to paint any exposed metal after cutting. If you need the mounting hardware for...
  view full answer...
• Do Rhino Rack Vortex Crossbars Have an Upward Curvature?
  The Rhino-Rack Vortex Bars are slightly bowed in the longer bar options to help support the weight when applied to the center of the bar. Most manufacturers have this as a part of the aero bar design. If you want a more straight bar, then you will want to instead use the heavy duty bars like # Y01-120B-NT for the track system or # RB1375B-2 for just the crossbars. There are longer bars like # RB1500B-2 and # RB1650B-2 if desired.
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Will Rhino-Rack Ski and Snowboard Carrier Fit Exposed Racks Crossbars on Jeep Wrangler
  The Rhino-Rack Ski and Snowboard Carrier # RR573 will fit your Exposed Racks Roof Rack crossbars. The reason the # HD-FK1 adapter is required for the square Rhino-Rack bars like # RB1375B-2 is because of their 1-7/8" height. The Exposed Racks crossbars are only 1-1/4" x 1-1/4" so you won't have a problem installing the ski/snowboard carrier.
  view full answer...
• Track Mount vs. Fixed Mount Rack For Tonneau Cover on 2021 Ford F-150
  Those are good questions, and you will indeed lose quite a bit of functionality going with a fixed rack system compared to a track mounted rack. The reason for that is simply that you'll have the ability to move the crossbars to accommodate whatever it is you need to carry, and depending on what that accessory may be, it won't be able to mount unless your crossbars have a specific spread distance. There is not a desired optimum spacing, that is completely up to you and what you are looking...
  view full answer...
• Best Roof Mounted Bike Rack Carrier for Rhino Rack Heavy Duty Square Crossbars
  I would be happy to help you. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will work with square crossbars like your Rhino-Rack Heavy-Duty Roof Rack Crossbars item # RB1375B-2. The product page is correct you can not use the Rhino-Rack MountainTrail Rooftop Bike Carrier item # RBC035 with square bars.
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Can Rhino-Rack HD Crossbars Be Mounted Over the Bed On a 2022 Toyota Tacoma
  I do have options for you but we don't offer any options to mount Rhino Rack HD Crossbars over the bed of a 2022 Toyota Tacoma without drilling into the bed rails, there are no attachments for the rail system for these bars. In order to utilize the Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1375B-2 you'll need to place them on the roof using the Rhino-Rack 2500 Series Legs part # RRRLKHD and Custom DK Fit Kit part # DK174. The other option is the Rhino-Rack Reconn-Deck Overland...
  view full answer...
• Availability of Rhino-Rack Roof Rack With Crossbars Longer Than 49 inches
  The correct Rhino-Rack crossbars that are confirmed to fit your 2004 Ford Ranger are the 49 inch ones that come with the Rhino-Rack bars # RRVA126B-2, 2500 Series Legs # RRRLKVA, and Fit Kit # DK191. The way that these specific crossbars are designed will not allow you to use a longer option due to the limited channel length on the bottom side of the crossbars. For a Rhino-Rack roof rack option that will allow you to fit longer crossbars to it you will need to go with the 2500 Series Legs...
  view full answer...
• 2013 Pathfinder Naked Roof Roof Rack Recommendation
  For your 2013 Nissan Pathfinder the Sportrack Semi-Custom roof rack part # SR1002 has not been confirmed to fit your vehicle, BUT I do have a similar roof rack that would work for you. Instead you would want the Rhino Rack roof rack that consists of part numbers # RB1375B-2 and # CXB if you are looking for the most economical roof rack option around.
  view full answer...

Do you have a question about this Roof Rack?