bing tracking image
  1. Roof Rack
  2. Rhino Rack
  3. Fit Kits
  4. 4 Pack
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points

Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points

Item # DK290
Retail:$127.95
Our Price: $110.96
You Save: $16.99
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 1.95 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with fixed mounting points. Legs mount to vehicle with attachment studs. Includes 4 pads and 4 attachment studs. Great Prices for the best roof rack from Rhino Rack. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points part number DK290 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2593)
  • Q & A (0)
  • Photos

Rhino Rack Roof Rack - DK290

  • Fit Kits
  • 4 Pack
  • Rhino Rack

This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with fixed mounting points. Legs mount to vehicle with attachment studs. Includes 4 pads and 4 attachment studs.


Features:

  • Custom fit kit allows you to mount 4 Rhino-Rack 2500 series legs (sold separately) on your vehicle with fixed mounting points
  • Threaded studs screw into fixed mounting points to provide attachment point for legs
    • Legs slide onto studs and secure with hex bolts
  • Molded-rubber pads are designed to fit the contours of your roof
    • Clip onto the bottoms of your roof rack legs
    • Protect your roof from scratches and abrasions


Specs:

  • Quantity: 4 pads and 4 attachment studs
  • Limited lifetime warranty


DK290 Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points

Installation Details DK290 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points - DK290

Average Customer Rating:  4.7 out of 5 stars   (2593 Customer Reviews)

This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with fixed mounting points. Legs mount to vehicle with attachment studs. Includes 4 pads and 4 attachment studs.

by:
2016 Mitsubishi Outlander

Rhino Rack installed on our 2016 Mitsubishi Outlander. Installation took approximately 25 minutes.



by:

Excellent! Needed some assistance, not much, upon installation but customer service was very helpful & didn't take long to fix what I needed. Great price & have had zero problems with the rack.



by:

I've been using this product for about a year now. Several road trips with the family. The product installed and has worked just as advertised. Needed two people for the installation, but that was expected. Overall I'm very happy.



by:

Easy install, clear instructions, grandma friendly! Did it myself in an hour.



by:
2020 Mitsubishi Outlander

Great fit, super fast shipping.



by:

Fantastic service. Very happy with this company! Highly recommend it



by:
2018 Mitsubishi Outlander

Excellent fit for a 2018 Mitsubishi Outlander Sport LE.



by:



by:

Review from a similar DK in Roof Rack


Pretty nice rack system. Held up to my 90lb canoe no problem. However a piece did fly off on the highway and the "locking" bar end cap can pull off super easy.
The directions were ok. There is some stuff you have to kind of figure out for yourself, mainly the roof trim. I plan to leave the rack on so I drilled theough the trim



by:

Review from a similar DK in Roof Rack


Just followed all the etrailer website prompts for my naked roof Toyota Matrix and it set me up with the three packages needed- rails legs and fitkit. Installed easily enough. I like the little arrow stickers hidden in the door jams for fast re-install later. Held two 10’ kayaks on a 2 hr journey with ease.



by:

Review from a similar DK in Roof Rack


Absolutely love the Rhino Rack. Easy to install (watch the [online] video). Looks GREAT. Hauls my kayaks no problem. Very well made and I highly recommend this product.



by:

Review from a similar DK in Roof Rack


The Rhino 2500 series is well built. The etrailer customer service person Trevor W. was great. He was so helpful in getting the right components for my Rhino 2500 roof rack to mount to my 2010 Silverado. Thanks for the help Trevor.



by: 04/26/2023

Review from a similar DK in Roof Rack


This was the kit for my 2020 equinox. The spacing of the feet on the vortex aero bars was incorrect I had to use the Euro sizes. Went back and forth with customer service trying to get confirmation that was the right size but it never was confirmed. Everything is installed now and sturdy.



by:

Review from a similar DK in Roof Rack


This is a perfect fit for our 2015 Prius V with "naked" roof. Instructions were clear and accurate, and the bars are solid and able to support our canoe and kayak easily. We added the air deflector, as there was a bit of wind noise, but now there is none. Great product at much lower price than the big names.



by:

Review from a similar DK in Roof Rack


Customer support was great. After reading the instructions and watching the video on how to install the Rhino Rack installation went well. The ski rack has one draw back, if you leave car out over night with skis locked in the ski rack, every thing can be easily stolen. All you need is an Allen wrench to remove the ski rack with the skis. The roof rack has locking covers the prevent theft of the roof rack. The ski rack can be easily removed from the roof rack.



by:

Review from a similar DK in Roof Rack


Installed this and 65" Vortex Areo crossbars on a 2015 RAM 5500 chassis cab/crew cab. It is listed to fit 1500 to 3500 RAM's and neither Rhino-Rack or etrailer would confirm it would fit the 5500. My research suggested there was not much, if any difference, between the 3500 and 5500 crew cab, so ordered it any way. Installation was relatively easy, fit seemed to be good and have made multiple 200-300 mile trips with a 75lb kayak. Good price, great customer service and fast delivery through etrailer.

Comments
Neither Rhino-Rack nor etrailer.com have tested the roof rack on a 5500 ChassisCab, which is why we couldnt confirm the fit.
-- Etrailer Expert Mike L - 10/06/2022


by:

Review from a similar DK in Roof Rack


Easy assembly and installation. Pay careful attention to pad direction as shown in instruction sheet for the fit kit. One gripe: one end-cap refuses to lock (blue plastic key lock). Had to tape it on so I don’t lose it.



by:

Review from a similar DK in Roof Rack


These were exactly the right part for my car. They were easy to put on the crossbar kit. The crossbar kit also worked great. I can't imagine how a more expensive set would have worked better than the Rhino Rack we bought.



by:

Review from a similar DK in Roof Rack


I needed roof racks on my 2023 Silverado to accommodate the shape of my canoe. I had Yakima racks on the camper shell but the canoe was hitting the top of my truck. My Rhino racks showed up yesterday evening and I’m ready to go this morning!



by:

Review from a similar DK in Roof Rack


This was a great purchase. I originally ordered roof crossbars from somewhere else and immediately returned them. They were a universal fit and were not secure at all when they were tightened down. They were from a third seller on Amazon. I found these on etrailer and I am glad that I made the purchase. I did not want to spend the money at first that these cost, but am glad that I did. The install was easy and the crossbars are very secure and hold up well with the cargo basket installed. They were well worth the money. Can't wait to try them out when we go camping. Thank you etrailer.



by:

Review from a similar DK in Roof Rack


We originally got this rack system (Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof Item #DK427) mostly for our Kayak racks on our 2015 Ford F-150, which worked great. Then we totaled our F-150 and the racks actually fit on our new 2022 GMC Sierra 2500 HD P/U. We took it on a 16,000 mile trip from the East Coast to Alaska with both 12 ft. kayaks on the top. Through the various speeds (sometimes up to 80 mph), weather conditions, and the high crosswinds of the mid-West, the racks help up perfectly. No issues or problems. I would recommend these to anyone.



by:

Review from a similar DK in Roof Rack


The rack was fairly easy to mount on my Durango. I was able to load my kayak from the side since I have a bike rack on the rear. I use a bathroom rug and flip the boat up on the car, then slide the boat directly onto the rack. I only carry it this way for short drives to local lakes. There is some wind noise at 50 mph.



by:

Review from a similar DK in Roof Rack


Fairly easy installation. Read the instructions thoroughly before hand and get familiar with the parts. Take care when installing mounting studs onto car itself so as not to strip or cross thread them. Once installed they look great.

Comments
Fantastic! Very little noise on highway and sturdy.
Robert - 10/14/2022


by:

Review from a similar DK in Roof Rack


I've had this Rhino Rack 2500 series for one year. I've outfitted the rack with one "J hook" style kayak holder and one "cradle" kayak holder. I am able to securely travel with two kayaks on the roof of my 2014 Honda Civic sedan without issue. During the one year I've had this rack I've traveled over 1,000 miles with two 12 foot+ kayaks on my roof. I can set cruise control at 70mph and not worry about the rack failing. I rate it four (4) stars because the cradles will sometimes move during a long drive and have to be readjusted. This is something that is more cosmetic in the since it looks slightly off, however it does not affect the racks security.



by:

Review from a similar DK in Roof Rack


The roof rack continued to get loose and I lost 2 kayaks going down the highway. I was able to recover them after significant damage. The whole rear rack fell off. Once reinstalled I added numerous straps and continued to stop every 50-75 miles to retighten and adjust so it didn’t happen again. I will not be using these roof racks again.


25
2591
Show More Reviews

See what our Experts say about this Rhino Rack Roof Rack

  • Is a Replacement Wrench Compatible with Rhino-Rack Fixed Mount Fit Kit DK290 Available?
    The Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points # DK290 does not have a replacement tool. You will need to either purchase another kit or find another tool compatible with your fit kit.
    view full answer...
  • Recommended Fit Kit For Whispbar Fixed Point System On 2016 Mitsubishi Outlander
    The Custom Fit Kit for Whispbar Flush, Through and HD Roof Rack Systems # WB-677 has been discontinued. Whispbar products are no longer going to be available as an aftermarket option, so the parent company is just selling out their stock. Unfortunately, the fit kit you need is no longer available. For your roof rack, I recommend the Rhino Rack fixed mount option. It consists of Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2, Rhino-Rack 2500 Series...
    view full answer...
  • Does Rhino Rack Roof Rack DS1375B Fit 2014 Mitsubishi Outlander with Fixed Mounting Points
    The Rhino Rack Roof Rack part # RRVA137S-2, # RRRLKVA is listed as a fit for your 2014 Mitsubishi Outlander with the fit kit part # DK290 which comes with the threaded portion you are missing to mount it to your vehicle roof.
    view full answer...
  • Roof Rack Recommendation for 2016 Subaru BRZ
    The only roof rack options we have for your 2016 Subaru BRZ are ones that require riveting the fit kit to the roof of the vehicle like the Rhino Rack roof rack part numbers # RRVA118S-2, # RRRDM01, # RRRLKVA, and # DK290. This will provide you with aero shaped crossbars that will work well with your snowboard rack most likely.
    view full answer...
  • Roof Rack System to Fit 2018 Mitsubishi Outlander
    We can help you with a roof rack system for your 2018 Mitsubishi Outlander that has a plain roof. The best value roof rack in my opinion is the Rhino-Rack Vortex Aero black roof rack that is made of parts # RRVA137B-2, # RRRLKVA and # DK290. Like costlier brands' similar products this will be a quiet rack that will make less wind noise. And the Vortex bars allow you to mount accessory carriers in two ways - with around-the-bar clamps and T-Slot fittings that slide into the track in the...
    view full answer...
  • Recommended Roof Rack Systems For 2013 Subaru BRZ
    If your 2013 Subaru BRZ has no existing rails or crossbars, the 2013 Subaru BRZ Roof Rack by Rhino Rack is a confirmed fit. To have the complete system, you will need the Rhino-Rack 2500 Roof Rack with Square Crossbars # RRVA11B-2, the Ditch Brackets for Rhino-Rack RLT600 Quick Mount Legs # RRRDM01, Leg Kit # RRRLKVA, and the Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs # DK290. I have linked to this article product videos and the entire list of roof rack systems that...
    view full answer...
  • Fit Kit Needed For Thule 460 Podium Feet
    The fit kit you need to attach your 460 Thule Podium feet to the flush mounted rails of your 2018 Mitsubishi Outlander is the 4030, but it has unfortunately been discontinued so the only two options you have are to get some secondhand or buy a new roof rack system. If you can't find a kit secondhand and would prefer to get a new square bar style roof rack then I recommend the 2018 Mitsubishi Outlander Roof Rack by Rhino Rack which includes the following: Rhino-Rack 2500 Roof Rack -...
    view full answer...
  • Roof Rack that Fits 2014 Subaru BRZ
    We have a great roof rack option for your 2014 Subaru BRZ but it does require some drilling of the roof ditch to install rivets with the Rhino Rack part numbers # RRVA118B-2, # RRRDM01, # RRRLKVA, and # DK290. You will need a drill and a drill stop is recommended so you don't drill too far. The channel cover is held back in with the roof rack feet installed. There are plastic caps that can be used to hold the channel in when not in use that are included. With that installed you could use...
    view full answer...
  • Roof Rack for 2017 Mitsubishi Outlander to Mount Thule Hullavator
    There are roof racks for both of your cars that will work with the Thule Hullavator # TH898, but both of your Mitsubishi's will require their own roof rack. The reason for that is they require different parts to install so you can either get a separate rack for both vehicles, or choose the one vehicle you use the most and put the rack on that car. I'll list the racks that fit both cars for you. - 2017 Mitsubishi Outlander (with Naked Roof): Rhino-Rack Vortex Aero Crossbars # RRVA137B-2,...
    view full answer...
  • Does Thule Motion XT Rooftop Cargo Box Fit Rhino Rack Roof Rack
    The Rhino Rack Vortex Crossbars # RRVA137B-2 you referenced measure 3-1/8" wide x 1-3/16" tall. The Thule Motion XT Rooftop Cargo Box # TH629806 will fit crossbars that are up to 3-1/2" wide and 1-11/16" tall so they will work on these bars! If you let me know the year, make and model of your vehicle I can confirm for you which Rhino Rack roof rack will fit and the parts you will need.
    view full answer...
  • Correct Selection of Roof Rack Systems for a 2019 Mitsubishi Outlander Without Roof Rails
    That is correct. In our roof rack fit guide for your 2019 Mitsubishi Outlander you will choose the category "with no existing rails or crossbars" which I've linked for you to filter through. I recommend checking out one of the Rhino-Rack aero-style roof rack system. We have the ROC25 which has more of an OEM look as well as the Vortex crossbar system which has the overhang past each leg. Below is a list of the parts you'll need for either setup: ROC25 Kit - # RR65GR Vortex Aero 54" Crossbars...
    view full answer...
  • What Setup do You Recommend for a Tern GSD, a Toddler's Bike, 2 Adult Bikes on My 2019 Outlander?
    From the specs I have on your Tern GSD, it looks like those models weigh 60 pounds and have front fenders and a rear cargo platform. The fact that it has fenders and a platform excludes the possibility of a wheel-mount rack. Also, it looks like wheelbase for the particular model you have is just about 49 inches. With the fender/platform limitation and the limitation of the small wheelbase of the toddler's bike, there is no way to transport all 4 bikes on a hitch-mounted bike rack all together....
    view full answer...

Do you have a question about this Roof Rack?


Info for this part was:

Employee Dan D
Updated by:
Dan D
Employee DeAnne T
Updated by:
DeAnne T
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Daron K
Updated by:
Daron K
Employee Alex H
Updated by:
Alex H
Employee Tyler C
Written by:
Tyler C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.