See what our Experts say about this Rhino Rack Roof Rack

• Can I Use a Yakima ShowDown or Thule Hulavator on a ARE Topper?
  First of all, thanks for the picture of your cute doggy! Yes, you can use a Thule Hullavator Pro item # TH898 or Yakima ShowDown item # Y04081. I can't tell from your picture but there were versions of the A.R.E. camper shells that had tracks on them already. The factory rails were made by Yakima. For a complete roof rack system on your A.R.E. topper you will need the following parts if you have the rails: Yakima Control Towers item # Y8890027 - You will need 4 because they're sold individually Yakima...
  view full answer...
• Roof Rack Option For a 2018 Nissan Titan Crew Cab
  The Rhino-Rack Heavy-Duty Roof Rack for Camper Shells # Y01-140B is only going to be for mounting to a camper shell and not to the roof of your 2008 Nissan Titan crew cab. Rhino-Rack does offer their Pioneer Platform # RR29KP as the only fit option for your roof. This does involve drilling holes in your roof and installing tracks with rivets. Unfortunately we do not have a video showing this installation as we have not performed it in our shop.
  view full answer...
• Ladder Rack For 2015 Chevrolet Silverado 2500 For Roll Up Tonneau Cover
  I do have an option for you but the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells part # Y01-140B is not height adjustable. The foot height of this particular setup is 3" and there is not a taller foot available unfortunately. There are a couple options available. You can use a traditional ladder rack like Adarac Custom Truck part # A90210 which will sit right on top of the bed rails and not interfere with the hardware from your tonneau cover. A lot of ladder racks are not compatible...
  view full answer...
• What Kind Of Rhino-Rack Will Fit My RetraxPro XR On My 2019 Ram 1500
  The Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 65" Long, part # RRVA165B-RRRLT600, is the Rhino Rack that fits the RetraxPro XR tonneau cover for your 2019 Ram 1500. It has 65" long crossbars and it has a weight limit of 220 lbs. I have included a product description link and a video demo link below.
  view full answer...
• Will the Rhino-Rack Track Mount Roof Rack System Work with a Tonneau Cover
  The tracks used with the Rhino-Rack Roof Rack System w/ 2 Heavy-Duty Square Crossbars part # Y01-140B are only 2" wide. Therefore, you would need to measure how much space you have on top of your bed rail with your tonneau cover installed. As long as there is at least 2" then the above system would not interfere with the tonneau cover. There are several different BAKFlip tonneau covers for your 2011 Chevrolet Silverado that mount both inside and on top of the bed rails therefore you will...
  view full answer...
• Thickest Spacer for Rhino Rack HD Roof Rack for Camper Shell
  For the Rhino Rack HD roof rack part Y01-140B the thickest spacer is 20mm and is the part # RRQMHD20. There isn't a way to use more than one of these.
  view full answer...
• What Roof-Mounted Bike Racks with Fit Rhino-Rack Heavy Duty Square Crossbars
  For accessories that will fit the Rhino-Rack Roof Rack System with 2 Heavy-Duty Square Crossbars # Y01-140B, I highly recommend staying within the Rhino-Rack family of products. Rhino-Rack makes some quality racks and carriers, and the offer specific adapters to allow some of these products to mount to their heavy-duty crossbars. The bike rack options I have for you will allow you to keep the tire installed on your bike during transport. First we have the Rhino-Rack Hybrid Roof Bike Rack,...
  view full answer...
• Where to Install Yakima Camper Shell Roof Rack on Snugtop Shell of 2018 Ram 1500
  The part # Y01-140B is a Rhino Rack HD roof rack setup for camper shells but you most likely are referring to the Yakima HardTop SL Roof Rack # Y01618. Either way you'd want to install the tracks to the outsides of the support area you mentioned. Either of these racks would easily handle the weight of the tent you mentioned
  view full answer...
• Will Aluminum Camper Shell be Strong Enough for a Rhino-Rack Roof Rack and Yakima Cargo Box
  It all depends on the capacity of the aluminum camper shell. You would need to contact the camper shell manufacturer for the weight carrying capacity of the camper shell roof. Ideally you would put the tracks from Rhino-Rack roof rack # Y01-140B towards the edges of the roof where the camper shell is the strongest. Ultimately though it comes down to what the manufacturer of the camper shell says. The roof rack itself is rated for 220 pounds but if the camper shell is rated lower then that...
  view full answer...
• Is 220 lb Load Rating of Rhino-Rack Roof Rack for Camper Shells for Static or Dynamic
  The 220 lb load rating for the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-140B is dynamic - so while you're moving. Please note you'll want to check the weight rating of what you're installing this on as well. Some campers or roofs will have a weight rating from the manufacturer and if it's below 220 lbs you'll want to stay under the lower rating.
  view full answer...
• Truck Camper/Topper Roof Rack System for a 2011 Ford F150 Crew Cab with 5-1/2 Foot Bed
  Rhino Rack produces a full range of track kits that will work on your truck topper. You simply need to choose the length and color for the vehicle. All of these kits include a set of Rhino-Rack Vortex Aero crossbars that have c-channel mounts and are quick-slide to move forward and backwards along the rack as you need it. They are all inclusive and don't require additional parts. 54 inches long, part # Y02-480B 59 inches long, part # Y02-490B 65 inches long, part # Y02-500B There are...
  view full answer...
• Recommended Roof Rack To Install On Bed Rails Above Tonneau Cover On a Ford Ranger
  I do have a roof rack that you can install atop the bed rails on a mid-size truck bed above a hard folding tonneau cover that mounts inside the bed rails and for that you will want to use the Rhino-Rack Roof Rack System w/ 2 Heavy Duty Crossbars part # Y01-140B.
  view full answer...
• Instructions for Installing the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells
  Installing the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-140B is pretty straightforward in that you will install the rails by using a 6.5mm drill bit to drill holes in your roof and then after that it's a simple manner of securing everything down with the included parts. We do recommend using some form of sealant like the TremPro 644 # 0160297 to help keep water out of your camper shell. We don't have any installation videos at this time, but we do have the installation...
  view full answer...
• Can I Use Rhino-Rack Batwing Awning on a Palomino Truck Camper?
  The Rhino-Rack Batwing Awning, # RR33100 installs in the top channels of a roof racks' crossbar or on a Pioneer platform. You will need to have something of this type in place on your camper for it mount to. We have the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells - Track Mount, # Y01-140B if you do not already have a roof rack installed. This will provide the needed tracks on the roof of your camper and cross bars with t-slots for the Batwing to mount into. Because the standard...
  view full answer...
• Roof Rack That Can be Installed on Leer Camper
  There are roof racks available that you will be able to install on your Leer camper. There are no special mounting brackets needed, but you will need to install tracks that the roof rack feet will sit in, and the crossbars will then attach to the feet. The correct bars are going to depend on the length you need, so you'll want to take a measurement of the width of the camper shell and choose from there; you can also choose from either silver or black crossbars. The correct rack will be...
  view full answer...
• Recommended Roof Rack for Leer Topper on Toyota Tacoma
  There are some similar systems to the Rhino Rack # Y01-140B, but they're all going to be rated similarly and I generally believe that Rhino Rack makes some of the best products in terms of durability, so that would be the system I recommend going with in this case. This is a track mounting roof rack system that mounts to the roof of your Leer topper via tracks; this type of installation does require drilling into the topper and has a capacity of 220-lbs. This rack has 63" long roof tracks,...
  view full answer...
• Crossbars for Leer Canopy With and Without Tracks To Carry 3 Kayaks
  There a few options to add a rack to the Leer Canopy on the 2020 Chevy Silverado depending on if you have the tracks in your canopy already. I recommend Rhino Rack part # Y01-140B which comes with the tracks to install into your canopy. This will require drilling. If you already have tracks, you can use Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-120-NT which can be used in the Thule tracks of the Leer Canopies. To carry 3 kayaks, I recommend the Rhino-Rack Nautic Stack Kayak...
  view full answer...
• Can I Use A Load Assist Kayak Carrier With Rhino-Rack HD Crossbars
  Unfortunately, it will not. I tried to mount the Yakima Showdown on the Rhino-Rack HD bars and I was unable to do so, the bars are to tall. None of our mechanical lift systems work with the HD bars. I can recommend a manual system that will aid you in loading your Kayak on your vehicle. I recommend the Malone DownLoader Kayak Carrier and TelosXL Load Assist w/ Tie-Downs - J-Style - Side Loading part # MPG114MD-351XL. It is the Malone DownLoader Kayak Carrier, which is a j-style carrier,...
  view full answer...
• Recommended Roof Rack for RSI Camper Shell on Truck
  The Rhino-Rack Heavy-Duty Roof Rack for Camper Shells part # Y01-140B is what I recommend using to add a roof rack to a camper shell. This is a complete kit which comes with everything you need from the tracks which attach to the roof to the crossbars which is what you'll use to secure your gear. The tracks make the crossbar spread adjustable so you don't have to worry about any restrictions. In regards to install, you will need to drill into the roof of the camper shell to install the...
  view full answer...
  
• Can Rhino Rack Pioneer Platform Tray Fit on HD Bars that Have Batwing Awning Installed As Well
  Yes, the setup you mentioned would work great. Your Rhino-Rack Heavy duty bar and track kit Item # Y01-140B that currently has a Rhino Rack Batwing Awning # RR33100 mounted using the # RR31102 would be perfectly compatible with the Pioneer Platform # RR42101BF with the # RR43105. You did a great job researching all the parts needed!
  view full answer...
• Roof Rack Option for Class C Motor Home to Carry SUPs
  Roof racks that are compatible with a Class C motor home are few and far between, but a track-mounted, adjustable roof rack system like the Rhino-Rack System with Heavy-Duty Crossbars # Y01-140B is not your only option to carry your SUPs on top of your motor home. Since there are not custom fit roof racks for motor homes, a system that installs into the frame of the motorhome along the top edge of the roof is the way to go. You will want to install the crossbar mounts along the outside...
  view full answer...
• Tracks and Crossbars for Top of Camper Shell for Carrying Ladder, Canoe, or Lumber
  We have the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-140B which is a set of 63 inch long tracks you can install on top of your camper shell with heavy duty crossbars that measure 65 inches in length. This would work great to haul ladders, canoes, or lumber. For load stops to help with the cargo on top of the bars the part # RRRLH would work great. We also have 20 inch straps that fit the HD Rhino Rack bars as well with the part # RLS5.
  view full answer...
• Parts Needed to Add Single Rhino-Rack HD Roof Rack to 2006 GMC Sierra to Match Camper Shell Rack
  We can get your 2006 GMC Sierra extended cab set up with the matching 65 inch HD crossbar that come with the # Y01-140B system for your camper shell. To make it work the parts will need to be pieced out, but by adding each of them it will allow you to add the track-mounted rack system for your camper shell and a single-bar rack with a matching HD crossbar. The exact parts you will need to make this work for your '06 Sierra are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Is the RTC Track Included with the Rhino-Rack Roof Rack System w/ 2 Heavy-Duty Square Crossbars
  The Rhino-Rack Roof Rack System # Y01-140B is comprised of the following parts: 65" Heavy Duty Bars - # RB1650B-2 Quick Mount Legs - # RRRLT600 63" RTC Tracks - # RTC16 So everything you need for a complete roof rack is included in the Roof Rack System # Y01-140B. You can see this on display in the attached photo a customer sent in. If you let me know what you plan on using the roof rack for I can make additional recommendations as necessary.
  view full answer...
  

Do you have a question about this Roof Rack?