To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These quiet, aerodynamic crossbars strap to your Nissan Rogue's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Features:
Specs:
The low-profile, aerodynamic Rhino-Rack Vortex StealthBar roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. The crossbars mounts directly to your vehicle's raised, factory side rails. The Vortex StealthBars have built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. These bars blend seamlessly with the support legs to provide a from-the-factory look, and they are custom cut to your specific vehicle. The legs also include built-in locks that protect your gear and the rack from theft.
Aerodynamic Design
The rubberized Vortex strips in the crossbar's top channel disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex StealthBar cuts through the air with minimal drag - even at highway speeds.
The Vortex StealthBar roof rack has a flush-mount design so the crossbar terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise.
Strong, Durable Construction
The Vortex StealthBar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding significant amount of weight. And the aluminum bar wont rust so you can leave it on your roof year-round.
The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight.
Custom Fit for Easy Installation
The roof rack arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs, and the bar is pre-cut to match the width of your vehicle's roof. The few remaining assembly steps are straightforward and only require the strap and lock fit kit.
The fit kit includes co-molded, rubber-coated stainless steel straps designed to fit around your raised, factory side rails. To install, remove the leg covers and simply attach the straps to the bottom of each leg. Then wrap the straps around your vehicle's side rails. Lastly, secure the straps to the top of each leg and replace the cover.
Channel-Mounted and Clamp-On Accessories
Each crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersports carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so theyre easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.
Built-In Security
Locking covers on each support leg let you secure accessories mounted in the crossbar's top channel. These sturdy nylon covers give the rack a finished look and also secure the rack to your vehicle's roof. The cover locks are keyed a like, so a single key opens all locks.
Alternate Instructions
California residents: click here
Fit is good
A little expensive for what it does but easy to put on
Great design. Best racks for the Cherokee on the market today.
Everything went as planned and follow up was awesome. I told my rep I needed product by a set date he went and saw they had the product in stock before he took my order and it was delivered as promised. Geoffrey sent a follow up email with his phone number to see if I got the product and needed advice on install. Great customer support.
I had one problem with my order: one of the cross bars was missing the rubber vortex strips. If you could have someone send these out it would be greatly appreciated.
Other than that, I'm very satisfied with the product.
The racks were easy to install, look good as they fit between the racks and not sit above and make no noise when driving even on the interstate.
Good solid product...20 minutes to install. Aussies should send instruction in Inches not Millimeters though... and finding the PDF with the fitment settings on their site is a bit of pain....
But bottom-line....wifey very happy she can take her SUP to the pond now. Me, happy she doesnt have to take my truck to do it.
Fit perfectly, very sturdy. I'm sold on Rhino Rack.
Excellent service! Definitely will do it again
Thank you etrailer for great communication and fast delivery!
Second purchase from etrailer and it's every bit as good as the first. Went on great as per instructions. Looks good too
Thrilled I got quick delivery with standard shipping! The product arrived in good care and took maybe 40 minutes to install. Looks great and is sturdy
It’s missing parts, the locking mechanism, keys, and straps to install the bar on the rack….
Rack setup and installation was a breeze. Offers a nice low profile design while being really sturdy. Mounted my extended cargo basket and the pair is rock solid.
An etrailer rep was very helpful in making the decision on which rack to buy, and it was shipped within hours of my order (on a Saturday). It was a great experience, and it was the lowest price that I could find.
I got these for my '22 BMW X7. There are really tight on the factory rails to remove/install. Quality of the bars is solid. They do clear the sunroof.
Pretty simple to install. I did need to adjust the length of the crosssbars to accommodate the diverging rails on my Flex. It worked great. The straps take a little effort to wrap around the rails but that was as difficult as it got.
Do you have a question about this Roof Rack?
Rhino Rack Accessories
Fit to this rack on your 2019 Nissan Rogue
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.