See what our Experts say about this Yakima Roof Rack

• Can I Put A 60" Long Crossbar On A 2022 Subaru Outback
  Hello Joe, thanks for reaching out. Yes, it is possible to put a 60" (or longer) crossbar on your 2022 Subaru Outback. I will need to verify a bit more vehicle information before I can recommend the correct parts. Does your outback happen to be the Wilderness edition? Let me know. Also please verify that your Outback has the factory installed raised rails running from front to back. Let me know and I will be able to narrow down the right roof rack. For example, if you do have the Wilderness...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
  Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 GMC Yukon XL
  To add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
  view full answer...
  
• Yakima Crossbar Length For 2022 Lexus GX 460 & Hullavator
  I checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• Parts Needed to Use Yakima JetStream Bars with a 2024 GMC Yukon XL W/ Flush Rails
  Niels, to continue using your Yakima JetStream Crossbars # Y00429 with your 2024 GMC Yukon XL with flush rails, you'll just need the SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UV and the SightLine Towers for Yakima Crossbars # Y64AR.
  view full answer...
• Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers?
  The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
  view full answer...
• Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDX
  Yes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
  view full answer...
• Best Roof Rack For 2024 Kia EV9 With Raised Side Rails
  The best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
  view full answer...
• Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails
  I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
  view full answer...
• Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof
  The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
  view full answer...
• Roof Cross Bars That Fit A 2015 Chevrolet Silverado 1500 With An A.R.E MX Bed Cap
  To install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like: -Yakima Tracks for Roof Racks # Y01126 for 42" long tracks, -Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or, -Yakima Tracks for Roof Racks # Y01135 for 60" long tracks. From here you'll need an actual set of crossbars like the: -Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing...
  view full answer...
• Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof
  Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
  view full answer...
• Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails
  Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
  view full answer...
• Yakima Roof Rack for 2018 Honda Odyssey that Can Fit Thule Hullaport XT
  The Yakima HD bar is too thick for the Thule Hullaport XT part # TH849000 to attach to so for your 2018 Honda Odyssey you'd be better off with the JetStream roof rack part numbers # Y00429 and # Y33TR.
  view full answer...
• Yakima Roof Rack that Fits 2019 Honda Passport with Raised Rails
  Since your 2019 Honda Passport has raised rails the roof rack feet that fit it are the ones that wrap around the bars whereas the flush bar roof styles are the ones that have options that attach directly to it. So for a Yakima there is the Jetstream part number # Y00429 and # Y33TR which is an aero shaped bar setup that wraps around your raised rails. This is a very solid setup that will work great and is no less reliable than any other option.
  view full answer...
• Roof Rack for Thule Canyon XT Roof Cargo Basket on 2020 Subaru Ascent
  Your 2020 Subaru Ascent will require a roof rack to carry any cargo basket, including the Thule Canyon XT Roof Cargo Basket # TH859XT. Assuming you have raised side rails that run front to back on your Ascent, here is the roof rack that will work with your Subaru: - Yakima JetStream Crossbars # Y00429 (Silver) or # Y00426 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR As for the paddleboards, there isn't anything designed to carry them in a cargo basket so you can use whatever...
  view full answer...
• Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory Rails
  We can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
  view full answer...
• What Roof Rack Do You Recommend for a 2007 Honda Element SC?
  Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
  view full answer...
• Whats The Longest Roof Rack Available For 2023 Toyota Highlander For Thule Hullavator
  The longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts: Crossbars # Y00429 Towers # Y53TR Landing Pad # Y66VR This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota.
  view full answer...
• What Length/Type Of Crossbar For Mounting Two Hullavators On 2025 Subaru Outback Wilderness?
  Hey Carol, I can definitely help with that! You will need to go with an extra long crossbar to accommodate two of the Thule Hullavators # TH898 on your 2025 Subaru Outback Wilderness, but it can be done. The best roof rack for this will be a Yakima JetStream rack since the design of their crossbars allows longer bars to work. Each Hullavator requires 28-1/2" of bar space so a 60" crossbar will do great. Here are the parts you need: - TimberLine Towers for Yakima Crossbars - Raised, Factory...
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
  47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
  view full answer...
• Option For Using 80" Yakima CoreBars On 2015 Toyota Sienna
  Good morning, and thanks for reaching out. Yes, we do have an option for using the 80" Yakima CoreBars on a 2015 Toyota Sienna with the factory raised rails. First, I would like to note that the 80" crossbars are super long for a Sienna. Yakima recommends a 50" CoreBar for the 2015 Sienna. We have a 2013 Sienna XLE with 41" OEM crossbars that are flush with the raised rails on the roof. The 80" bars are almost twice that length, so they are going to stick out like 20" past the raised...
  view full answer...
• What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
  Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
  view full answer...
• What Comes with the Annex for 2 Person Yakima SkyRise Tents # Y07421
  The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red). The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs...
  view full answer...
• Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
  Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
  view full answer...
• Roof Rack for 2024 Subaru Forester Wilderness With Roof Top Tent
  I'm assuming you're wanting a roof rack to hold your tent since you looked at the Malone AirFlow2 # MAL74AR. I would double check the requirements of your roof tent to be sure, but this roof rack should be able to handle it. For example, a tent like the Yakima SkyRise # Y07436 requires a roof and roof rack with a minimum capacity of 165 lbs. The Malone rack would meet those requirements. If you only plan to use the roof rack when you use the tent the Malone is a good option. If you want...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Recommended Roof Rack for 2024 Toyota Sienna
  For an extremely quiet roof rack that fits your 2024 Toyota Sienna I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 -TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR The JetStream bars use an asymmetrical design along with WindRidges to reduce drag, noise, and wind vibration. This means they will definitely be quiet compared to the factory crossbars. You can also add...
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• 2018 Toyota 4Runner OEM Crossbars Fitment with Yakima LockNLoad Platform Rack
  The Yakima LockNLoad Platform Rack for Crossbars # Y05047-39 will fit your 2018 Toyota 4Runner, but you'll need to use aftermarket crossbars because the OEM crossbars sit too low to the roof and this mounting hardware won't fit. To install an aftermarket roof rack I recommend the Malone AirFlow2 # MPG216 because it is a cost-effective solution that will get the job done. If you'd like a solution that looks a little more custom fit the you can use the 60" Long x 54" Wide LockNLoad Platform...
  view full answer...
• How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
  Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
  view full answer...
  
• Replacement long T-Bolt Kit for the Yakima Timberline Towers
  Brandon, it looks like the long Allen bolt you're looking for for the TimberLine Towers for Yakima Crossbars # Y33TR is only offered as part of the Replacement Rubber Strap Kit for Yakima TimberLine Towers # 8880820.
  view full answer...
• How to Fit Yakima Show Down Kayak Carrier on 2014 Subaru Outback with Factory Roof Rack
  The Yakima ShowDown kayak carrier part # Y04081 can fit your 2014 Subaru Outback Wagon but would require an aftermarket roof rack as it won't fit the factory bars. So for that Yakima recommends the Jetstream bar roof rack # Y00425 and # Y33TR which is a high quality and aerodynamic roof rack confirmed as a fit for your vehicle.
  view full answer...
• Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
  Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Which Yakima Feet for 2017 Jeep Cherokee for Roof Rack for Yakima SkyBox Cargo Box
  For your 2019 Jeep Cherokee with the raised rails the correct Yakima feet for attaching crossbars is the Timberline like the Yakima Jetstream roof rack part numbers # Y00425 and # Y33TR. These would work really well with the Yakima SkyBox NX 16 part # Y95AV you also mentioned. There would be no clearance issues as I checked with Yakima to confirm this for you.
  view full answer...
• Recommended Roof Rack For A 2018 Chevy Equinox Hauling A Kayak And Bike
  Hey William, If your 2018 Chevy Equinox has rails that run from front to back then I recommend the Yakima JetStream Crossbars # Y00425 and TimberLine Towers # Y33TR. If you have a naked roof then you'll need the following roof rack components: Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK488 To haul the kayak you can can clamp on a carrier like the Rhino-Rack...
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Are Thule and Yakima Roof Boxes Compatible with RockyMounts Ouray Crossbar for a Ford Flex
  The RockyMounts Ouray Crossbars will be compatible with a Thule or Yakima roof box like the Motion XT # TH629706 or the SkyBox 16 # Y95AV. If you can let me know what year Ford Flex you have I can help you find the correct roof rack fit for your application.
  view full answer...
• Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side Rails
  For your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
  view full answer...
  
• What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?
  For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Roof Rack Recommendation for 2013 Honda Odyssey to Carry two Thule Hullavators
  Hey Mark, for your 2013 Honda Odyssey you'd need a roof rack with longer crossbars like the Yakima Jetstream part # Y57SD to fit two of the Thule Hullavators part # TH898. This rack has 60 inch crossbars that are the nicest and quietest options around.
  view full answer...
• Roof Rack For Carrying Two Tooenjoy Lift Assist Racks On A 2015 Toyota 4Runner
  Hello Rob, thanks for reaching out. We do have a roof rack option that will fit your 2015 Toyota 4Runner and will allow you to carry both of your Tooenjoy Elevating Roof Rack 302 units. Here is what I recommend: - Yakima TimberLine Roof Rack for Raised Rails - JetStream Crossbars - Aluminum - Silver - Qty 2 # Y57SD This is a complete roof rack system, so you get your towers and your crossbars. The towers will attach directly to the factory raised rails on your 4Runner. The crossbars are...
  view full answer...
• What is Needed For Yakima LockNLoad Platform Rack on 2024 Hyundai Santa Fe
  Hi Jim, I checked directly with Yakima for you, and while you can use a LockNLoad platform, there isn't one that mounts directly to the feet on the side rails of your 2024 Hyundai Santa Fe. So what you'd have to do is get the Yakima roof rack and then add the LockNLoad on top of that. Here are the parts you need, and you have a choice of either Black or Silver for the roof rack: - Yakima TimberLine Roof Rack for Raised Rails - Silver # Y57SD or Black # Y42GD - Yakima LockNLoad Platform...
  view full answer...
• Best Roof Rack For 2025 Honda Passport Trail Sport With Factory Roof Rails
  Hello John, thanks for reaching out. Yes we do offer roof racks for the 2025 Honda Passport trail sport with the factory roof rails. What I recommend is the Yakima TimberLine Roof Rack for Raised Rails # Y57SD. This is a full roof rack system that comes with 60" aero crossbars. The crossbars have a 165 lb capacity. For carrying your canoe, my favorite canoe mount is the LockRack Series-X Universal Watersport Carrier # LR88FR. It is super durable, easy to use, and fully lockable. Then...
  view full answer...
• Recommended Roof Rack for a 2024 Kia Telluride w/ Raised Roof Rails
  We have a couple of Timberline roof rack set ups for your 2024 Kia Telluride but nothing with HD rails or crossbars. They are the Yakima TimberLine Roof Rack for Raised Rails item # Y42GD in black or item # Y57SD in silver. Both of these kits include the adapters you need to attach to your Kia's raised rails. The 60" bars are definitely going to be the way to go. I attached a couple pictures below so you can see exactly what they're going to look like on your Telluride. There's also an...
  view full answer...
• Recommended Roof Rack For A Thule Hullavator On A 2019 Ford Expedition
  Hey Steve, You're correct that you'll need aftermarket crossbars with 4" - 8" of overhang past the towers otherwise the Hullavator # TH898 will hit the side of the Expedition when lowering it down. Since there isn't a Thule option available I recommend the Yakima TimberLine Roof Rack # Y57SD. This rack comes with 60" crossbars so you would have enough overhang to clear the side of vehicle and with the TimberLine towers you can easily set the spread for the Hullavator's 24" minimum....
  view full answer...