bing tracking image
  1. Roof Rack
  2. Inno
  3. Feet
  4. 4 Pack
Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4
Inno

Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4

Part Number: INXS200
$191.46
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's naked roof to create a roof rack with a streamlined look. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof. Great Prices for the best roof rack from Inno. Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4 part number INXS200 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (424)
  • Q & A (0)
  • Photos

Inno Roof Rack - INXS200

Highlights

  • Streamlined Design: The Inno Flush Feet create a low-profile roof rack that complements any vehicle with naked roofs, offering that sleek, factory-like finish.
  • Integrated Hand Knobs: Secure feet to your roof effortlessly without tools, ensuring a stable setup for your Aero crossbars.
  • Weather-Resistant Material: Made of durable AES plastic, these feet withstand harsh weather, extending the life of your roof rack.
  • Locking Covers: Securely fasten the roof rack to your vehicle, enhancing security during travel.
  • 165 lbs Load Capacity: Carry a variety of gear confidently, making it ideal for adventures and daily trips.
  • Complete Roof Rack Solution: Pairs seamlessly with Inno Aero Crossbars and a custom fit kit for a full rack system.

Features to know about

Streamlined Look for Your Vehicle: Flush Design Feet

Say goodbye to bulky and protruding roof racks! The Inno Flush Feet mount your Aero crossbars seamlessly on your car's naked roof, giving it a sleek, factory-like appearance. With this flush design, the crossbars don’t extend past the feet, maintaining a clean, aerodynamic profile that blends effortlessly with your vehicle’s aesthetics. Ideal for those who prioritize style as much as functionality.

Durability Meets Performance: Weather-Resistant AES Plastic Construction

Whether you’re facing harsh weather or rugged terrains, these feet are built to last. Made from durable AES plastic, they withstand the elements and keep going strong. This robust construction is not just for looks; it's designed to handle a weight capacity of up to 165 lbs, ensuring that your gear stays securely attached.

Effortless Installation: Integrated Hand Knobs and Easy Slide-On Mechanism

Installing your roof rack doesn't have to be a daunting task. Thanks to the integrated hand knobs, securing the feet firmly onto your roof is a breeze. The easy slide-on mechanism allows for a quick setup with minimal tools – just slide the Aero crossbars into place and tighten. It’s designed to be simple, so you spend more time on the road and less on installation.

Enhanced Security: Locking Covers and T-Slot Compatibility

Your gear deserves to be protected. The locking covers on these feet ensure that the system securely attaches to your roof, while simultaneously safeguarding any T-slot-mounted accessories you might have. They come with two keys, adding an extra layer of security. Whether it's your weekend gear or everyday essentials, everything remains safe and sound.

Maintain Efficiency: Low Wind Noise at Highway Speeds

Long drives are more pleasant when they come without the roar of wind noise. The aerodynamic shape of these flush-mount feet helps minimize air drag, leading to quieter rides even at highway speeds. Plus, your vehicle's fuel economy remains largely unaffected, letting you focus on the journey without worrying about the extra noise or costs.

Specs

Weight Capacity

  • Weight capacity: 165 lbs

Warranty

  • Limited lifetime warranty

Note

  • Always observe your vehicle's maximum roof load capacity

XS201 Inno Aero Bar Flush Stays for Bare Roofs - Qty 4

Replaces XS200

Installation Details INXS200 Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.9

113 reviews
These Flush feet help you mount 2 Inno Aero crossbars to your vehicle's naked roof to create a roof rack with a streamlined look. Hand knobs tighten feet in place on your roof. Locking covers secure system to roof.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Great product! Easy install. Highly rec ommended.



by:

These are fine



by:

Inno makes the best products



by:

Hold well and fit perfectly in my Subar u.



by:

Easy to install - good fit - no compain ts



by:

Fits great, sturdy, snug to the car. Exactly what you need, 5 stars.



by:

Good racks, one year of frequent use and no problems. The instructions could have been clearer, but once I figured it out it was easy to install.



by:

Easy to install. Instructions are almost perfect. Watching the video really helped, especially the tip of laying the rails down and then marking the trim. I used a hacksaw to cut the trim, really easy. Thank you guys for an awesome product. I hope it is durable, it feels solid, but only time will tell.



by:

1 Year of use and the Inno rails still solid - stealth - and quiet. Very easy to mount/remove as needed. Perfect choice in a saturated market of options. etrailer best out there for info - research - products- and price!



by:

etrailer was great to work with on my order. I really didn't now what I needed, but I knew what I wanted it to do. They were very knowledgable and helpful. Will definitely recommend and use again.



by:

First off, eTrailer Rocks! The website, the reviews, the product tutorials, the fast shipping. This is my second purchase and i am now a loyal customer.

The Inno crossbars are exactly what i wanted for my 2013 Murano; the installation was simple thanks to the video instructions from eTrailer--and i'm very pleased with the fit, and the overall look.


25
113
Show More Reviews

See what our Experts say about this Inno Roof Rack

  • Recommended Roof Rack and Track System for Truck Topper to Carry Canoe on 2012 Toyota Tundra CrewMax
    We can get you the parts needed to install a roof rack on your truck topper so you can haul your canoe. There are advantages to systems in regards to quality and value, and for your application the best fit is from Rhino-Rack, who is known for their quality, which is consistent with other brands, but often not with as high a price tag. What I recommend is: - Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount # Y02-490B This will give you 59 inch crossbars on your camper shell,...
    view full answer...
  • Lowest Profile Roof Rack for a 2016 Audi A6 Sedan
    The lowest profile roof rack for a 2016 Audi A6 Sedan is the Inno Aero Crossbar System part # INXB100-108, part # INXS200, and part # INK412. This system sits about 3-1/2" to 4" from the roof to the top of the crossbar but it is hard to get exact measurements due to all the different roof shapes. I have attached a photo of the Inno Aero Crossbar System installed on a different vehicle that way you can get a better feel for how tall it is.
    view full answer...
    Image 1 for
  • Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
    There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
    view full answer...
    Image 1 for Image 2 for
  • Roof Rack Recommendation for 2002 Subaru Impreza
    For your 2002 Subaru Impreza WRX sedan the Inno roof rack part numbers # INXB100-2, # INXS200, and # INK106 is a confirmed fit and would be a great solution to carry your roof basket.
    view full answer...
  • What Is The Lowest Profile Roof Rack For A 2023 Mazda CX30 With Factory Flush Rails?
    Removing the factory rails will definitely be the way to go if you want to have the roof rack sit as low as possible. This way the towers can sit directly on the roof, as opposed to sitting on top of the rails. Removing the rails is actually something we recommend fairly frequently for a 2023 Mazda CX30. For you I recommend the Thule WingBar Setup. The towers and crossbars will add only about 4-1/8" of height to your roof. This consists of the following parts; Thule Wingbar 53" # TH711400 Evo...
    view full answer...
  • Recommended Inno Roof Rack For 2013 Honda Civic Coupe Naked Roof
    The custom fit kit part # INK642 that you referenced is the correct fit kit for the 2013 Honda Civic Coupe. To complete the roof rack system you will need Inno Aero Crossbars part # INXB130-138 and Inno Through feet part # INXS250. The Inno crossbars are aerodynamic to cut down on wind noise and have integrated T-slots to make mounting accessories easier. The through feet are designed so the bar sits on top of the feet and allows for bar overhang, which comes in handy if you have a water...
    view full answer...
    Image 1 for Image 2 for
  • Roof Rack Recommendation for 2016 Fiat 500X with Smooth Roof
    There is a great option for a roof rack from Inno, who is also the only manufacturer that makes a rack which fits your 2016 Fiat 500X with a naked roof. This will give your 500X a low-profile, sleek and durable roof rack that can carry all kinds of gear. The rack consists of: - Inno Aero Crossbars # INXB100-108 - Inno Flush Feet # INXS200 - Custom Fit Kit # INK482 As you can see by the accompanying photo of this roof rack on a 2016 Fiat 500X the Inno's crossbars fit the exact width of...
    view full answer...
    Image 1 for Image 2 for
  • Where to Install Feet of Inno Roof Rack on a 2014 Toyota Prius v
    I'll be happy to help you out with the installation of the Inno parts (listed below) on your 2014 Toyota Prius v: 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS200 Fit Kit - # INK870 For the front crossbar you will space the feet out at 20-1/2" and position the feet 2" in front of the door edge like you mentioned. For the rear crossbar you will space the feet out 20-3/4" and position the feet 25-1/2" back from the door edge. Attached is a snapshot of these specs out of the installation...
    view full answer...
    Image 1 for
  • Roof Rack and Kayak Carrier Recommendation for 2018 Lincoln MKX
    The roof rack I recommend for your 2018 MKX with a naked roof is the Inno Aero Bar roof rack part numbers # INXB115-2, # INXS200, and # INK676 because this custom fit rack has aero bars which are very quiet, installs very easily, and we know it fits and works well on the MKX as we had the chance to install the rack on one. Check out the linked install video I attached for this rack to see us walk through the install of the rack on a 2015 MKX. Then for a kayak rack I recommend the Yakima...
    view full answer...
    Image 1 for
  • Inno Roof Rack Recommendation for 2008 Toyota Prius
    The Inno Aero Bar Roof Rack part # INXB108-2, # INXS200, and # INK705 is a great option for your 2008 Toyota Prius. It does come with locks and also the aero shaped bars help minimize wind noise. This rack does install using door clamps and the feet then rest on rubber pads on the roof of your vehicle. Over time these racks hold up just fine. I'd periodically remove the feet and clean them and the vehicle paint to prevent any scratching but even that is really unlikely. Value wise this...
    view full answer...
    Image 1 for
  • Roof Rack for 2022 Chevy Traverse with Naked Roof
    For your 2022 Chevy Traverse that has a naked roof we have the Inno roof rack part numbers # INXB123-2, # INXS200, and # IN63FR which would work great. It clamps around the door frame so it's pretty easy to install and remove as well. It would be great for a temporary install or to be left on for a decent amount of time. The bars are aero shaped too which means there would be minimized wind noise.
    view full answer...
  • Recommended Roof Rack for a 2015 Honda Civic Coupe
    The Inno Aero Crossbar System part # INXB108-115, part # INXS200, and part # INK642 is a great cost effective option for a 2015 Honda Civic Coupe and what I recommend using. In fact, it is the most cost effective option we have with the aero shaped crossbars. It also has a very sleek design since the crossbars don't extend past the mounting feet. I have attached a full list of options below.
    view full answer...
  • Lowest Profile Roof Rack for 2022 Mazda CX-5 With Bare Roof
    The lowest-profile roof rack for your 2022 Mazda CX-5 is the flush-mounted Inno rack on your bare roof. The overall height added will be 4 inches give or take a small amount (the curves of the roof will mean this can vary). The flush-mount does not shift the mounting point, however, as the feet have to be positioned at specific points on your CX-5, per the instructions. The parts that make up the Inno rack that fit your '22 CX-5 are the following: - Inno Aero Crossbars # INXB108-115 -...
    view full answer...
  • Recommended Way To Carry Bikes On My 2018 Lexus RX 450HL
    Though we do not have a trailer hitch available for your 2018 Lexus RX 450hL we do offer The SeaSucker Hornet Rear Window Bike Rack for 1 Bike - Handlebar Mount - Vacuum Cup Mounted # 298-BH1302. This bike rack can hold up to 1 bike that weighs up to 35 pounds. The suction cup mount has a pull strength of 120 pounds. If you're wanting to carry cargo you can get a roof rack system then attach a cargo carrier on the rack. If you have flush mounted rails: The Rhino Rack Vortex Crossbars...
    view full answer...
  • Crossbar Spacing Instructions For The Inno Aero Crossbars On A 2015 Toyota Prius
    The Inno Aero Crossbars # INXB100-108 with the flush feet # INXS200, with the fit kit # INK865 will need to be mounted: -15-3/4" from the gap between the front and rear doors, for the rear, &, -11-3/4" from the gap between the front and rear doors, for the front. I have included a a diagram depicting these measurement for you to check out as well.
    view full answer...
    Image 1 for
  • Roof Rack Recommendation For A 2024 Honda CR-V Sport L
    Hello Ken. We do have roof rack options for your 2024 Honda CR-V Sport L. Does your CR-V have the OEM flush mounted rails that run front to back? I ask because we offer roof rack option for both naked roof vehicles as well as vehicles with the OEM flush mounted rails. So, I will go ahead and recommend options for both roof styles: OEM Flush Mounted Rails - Thule WingBar Evo Crossbars # TH711300 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo # TH52KE Naked...
    view full answer...
  • Roof Rack Options For 2020 Lexus RX 350 With Panoramic Glass Sunroof
    If your Lexus has flush mounted rails that run back and forth on the roof, I recommend to use the Thule WingBar Evo Aluminum Crossbars part # TH711200 with the feet part # TH710601 and fit kit part # TH186044 for the 2020 Lexus RX350 F sport with panoramic roof. This rack does fit with the panoramic roof however Thule recommends that you do not open the glass roof when the rack is installed because it will damage the roof, the accessories on the rack and create a lot of wind noise. The...
    view full answer...
  • Can a Yakima Roof Rack for a 2001 Nissan Frontier Fit a 2012 Hyundai Tucson
    The 2012 Hyundai Tucson does require Q99 clips and Q116 clips. The correct Landing Pads will be included. But for reference the front pad is E and the rear pad is A. The other issue is that the bars used on the Frontier are the 48 inch bars. But the Tucson requires 58 inch bars, # Y00409. These Q-Clip components are no longer made by the manufacturer so I recommend upgrading to a different roof rack. My recommendation for your 2012 Tucson is the Inno Roof Rack # INXB108-115, # INXS200,...
    view full answer...
  • 2013 Subaru Legacy Roof Rack Recommendation for Naked Roof
    Yes, the Rhino-Rack ROC25 Roof Rack RR39RR is a fit for your 2013 Subaru Legacy with the naked roof, but we also have it listed as discontinued. If you like the sporty look of this rack then I recommend checking out the Inno alternative which includes the following: 45" Aero Crossbars - # INXB115-2 Flush Feet - # INXS200 Fit Kit - # INK851 If you let me know what you plan on using the roof rack for I'd be more than happy to make some recommendations for you!
    view full answer...
  • Roof Rack and Roof Mount Bike Carrier Recommendation for 2004 Ford Freestar
    In order to carry two bikes on the roof of your 2004 Ford Freestar, you will want a roof rack, as well as two roof mount bike carriers. I recommend the Inno Aero roof rack. It consists of the Inno Aero Crossbars # INXB115-2 Inno Flush Feet # INXS200, and Custom Fit Kit # INK211. This is a confirmed fit for your vehicle. For a roof mount bike rack carrier I recommend the Yakima FrontLoader Wheel Mount Bike Carrier # Y02103. This rack will fit your Yakima crossbars and support bikes...
    view full answer...
  • Flush Aero Bar Roof Rack Recommendation for 2017 Lincoln MKX with Naked Roof
    For an aeroblade style roof rack confirmed as a fit for your 2017 Lincoln MKX with a naked roof the Inno roof rack of part numbers # INXB115-2, # INXS200, and # INK676 would be what you need. This is a flush bar style roof rack which means the crossbars do not extend past the feet at all so the bars match the width of your roof.
    view full answer...
  • Aero-Style Roof Rack for 2018 Lexus RX 350 with No Roof Rails
    We can help you with an aftermarket roof rack for your 2018 Lexus RX 350 that has a bare roof with no sort of rails or fixtures. The current options come from Inno, a prominent maker of OEM roof racks for many import vehicles. Their three rack systems for your RX 350 are shown on the linked page. The first two racks shown use longer cross bars which extend out past the mounting legs to give you the most available cargo space. The last one shown uses shorter bars that terminate in the...
    view full answer...
    Image 1 for
  • Recommended Roof Rack for 2017 Mazda CX-5
    I do have a solution for you. If the roof on your CX-5 has factory installed rails that run front to back, I recommend looking at the Thule Roof Rack # TH711220, # TH460R, #THKIT3160. This is a nice roof rack system with an aerodynamic profile to reduce wind noise and a weight capacity of 165 pounds. The kit will include the two 50 inch long crossbars, 2 towers with keyed locks, 4 end caps, 2 keys and all the necessary hardware for installation. If you have a roof with no rails and...
    view full answer...
  • Recommended Roof Rack for 2021 Mazda CX-5 Carbon Edition
    For your 2021 Mazda CX-5 Carbon I recommend the Inno Roof Rack consisting of the following: Inno Aero Crossbars - Aluminum - Black - 42" Long and 45" Long - Qty 2 # INXB108-115 Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS200 Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK497 This is rated for 120 lbs and is compatible with your Rhino-Rack Ski Rack. The fit kit does allow for this roof rack to be removed as needed, but you will need to remeasure...
    view full answer...


< Previous
123. . .5



Do you have a question about this Roof Rack?


Info for this part was:

Employee Zack K
Video by:
Zack K
Employee Andrew K
Video by:
Andrew K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Aidan B
Video by:
Aidan B
Employee John S
Video by:
John S
Employee Charles A
Video by:
Charles A
Employee Ethan H
Video by:
Ethan H
Employee Tyler C
Written by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Lisa S
Updated by:
Lisa S
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Alex H
Updated by:
Alex H
Employee Manda E
Updated by:
Manda E
Employee Hayden R
Test Fit:
Hayden R
Employee Savanna B
Test Fit:
Savanna B
Employee Evangeline M
Test Fit:
Evangeline M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<