1. Roof Rack
  2. Inno
  3. Truck Bed Systems
  4. Square Bars
  5. 2 Bars
  6. 65 In Bar Space
Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks

Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks

lowest price pledge
Our Price: $204.54
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 17 lbs
In Stock
Inno 2 Bars Roof Rack - INRT101-65
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear. Lowest Prices for the best roof rack from Inno. Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks part number INRT101-65 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (1)
  • Videos (1)
  • Photos
  • Why etrailer?

Inno Roof Rack

  • Inno
  • Truck Bed Systems
  • Square Bars
  • 2 Bars
  • 65 In Bar Space
  • Aluminum
  • Non-Locking

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.


  • Cargo rack lets you carry bikes, cargo boxes, skis, or kayaks above the bed of your full-size truck
    • Leaves your truck bed free for other gear
  • 2 Elastomer-coated, hardened steel crossbars serve as the rack's structure
  • Easy, clamp-on installation to bed rails - no drilling required
    • Tighten down aluminum clamps with included bolts
  • Powder coated steel plates protect bed rails from scuffs and scratches
    • Also help distribute clamping pressure


  • Application: most mid-size trucks with standard bed rails
  • Weight capacity: 110 lbs
  • Carrying capacity: 2 bikes
  • Crossbar length: 65"
  • Minimum crossbar spread: 27-1/2"
  • Limited lifetime warranty

Note: This cargo rack cannot be used on a truck bed with a tonneau cover. If your truck has an aftermarket over-the-rail bedliner, it may be necessary to cut away sections of the over-the-rail liner to properly install this cargo rack.

INRT101 Inno Stays for Trucks with Standard Beds - Qty 4

INB165 Inno Standard Square Steel Load Bars - 65" Long

Item # INRT101-65

Installation Details INRT101-65 Installation instructions

This Product Fits The Following Vehicles

Video of Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Inno Feet For Standard Truck Bed Rails Review

Today we will be taking a look at the Inno Truck Stay System. Part number INRT101. This is for standard truck beds. The Inno Truck Bed Stays are a great item to have to really maximize the cargo space on your pickup. They allow you to install crossbars above your bed, which then allows you to install items such as, bike racks, cargo carriers, kayak carriers, really freeing up your bed for other items. So, if this was a camping trip for example, you could have all your sleeping bags, tents down in the bed and all of your additional fun accessories here on top. The Inno Truck Bed Stays are designed to clamp to the side channel of your pick up bed.

There is no drilling required. They simply just tighten on. They are going to work with most any style of pick up bed. You will just need to purchase the crossbars separately to fit your particular bed. They do work with round or square crossbars.

The stays themselves are made of a sturdy metal construction. They are going to resist corrosion. The system itself comes with a rubber coated plate that goes between the stay and the side of your pickup to reduce the risk of any damage. The clamps feature an ergonomically designed plastic lever, that is going to make tightening it very easy. They also have a nice finger hold here.

It is going to help you get maximum torque. Now that we have gone over some features of the Truck Stay System, I will go ahead and show you how to get it installed. You are going to need to provide your own crossbars. You will want to keep in mind that the bars themselves need to be at least 5 1/2 inches greater than the width of the inside of your truck. So, the first thing that I am going to do is take a measurement here. From inside to inside of our truck bed here today, we are working with 63 inches here.

We want to make sure that the cross rails that we are using are 5 1/2 inches greater than that. Take a measurement of our cross rails here. Our cross rails here that we are working with today are 78 1/2 inches. We should have no issue getting this installed. Now, this is a virtually tool-free installation. The only tool you are going to need, Inno provides. That is this little Allen wrench. The first step is to take our plate and we are going to just slide it here, on our bed rail. That plate is really nice. It is going to keep your bed rail protected. Second step is we are going to take our stay, loosen it up all the way, and this stay is actually just going to clamp on the underside. So, then we can just take this lever down here and we will actually begin by twisting it. That is going to raise this portion to the underside of our bed and clamp it into place. We will want to get close but not all the way. This lever is actually a Cam lever so, when we flip it, it is going to provide that final tightening. We will tighten this. Once we feel like it is starting to get close, give it one final turn and then flip this up and it is going to lock our stay into place. To make sure that our crossbars are even once they are installed, we are going to want to take a measurement. We will go from the edge of this stay to the edge of our bed. We are going to want to repeat that measurement on the opposite side. Looks like we are working with about 13 inches here. So here on the passenger side I am going to measure out 13 inches. That is where I am going to set my plate into place. We are just going to repeat that same process with our clamp over here. Set it into place, tighten it down. With both our stays in place we are ready to insert our bar. Just going to use the included Allen bolt to loosen these nuts. That is going to allow us to open up the top of the stay. Now we can set our bar into place. Before we tighten it back down, we are going to want to make sure we have even bar overhang. So, we can slide our bar into place, just take a quick measurement. It looks like we have about 7 inches on each side, so we are good to go. So, we will just go ahead and put our bolts back into place and that is going to clamp down on the bars, insuring a tight fit. Just repeat this process on our other stay. Now to install our second bar, we are going to want to determine the length we want between our bars. A lot of times that may very depending on which accessories you may be using. Once you have determined that particular length, you will take a measurement from the first stay and go out to that length. Today we are going to go with 30 inches. We are just going to repeat that same process to get our second set of bars installed. With both of our bars installed, we are ready to load up some sweet accessories and hit the road. That is going to complete our look at the Inno Truck Bed Stay System. Part number INRT101.

Customer Reviews

Inno Truck Bed Cargo Rack - Standard Beds - Mid-Size Trucks - INRT101-65

Average Customer Rating:  4.7 out of 5 stars   (3 Customer Reviews)

Square steel crossbars mount with clamps onto your truck bed's standard rails to create a rack for carrying gear. The adjustable rack helps to maximize your cargo-carrying capacity by leaving your bed free for other gear.

- INRT101-79

Review from a similar TBC Rack in Roof Rack

Love the product Fits my needs perfectly as a I have a Decked bed box system Makes carrying my PA 14 much easier 516509

- INRT102-79

Review from a similar TBC Rack in Roof Rack

Overall it is a good product, but do not try to stand on it. It will serve as a good rack for equipment. I use it to carry my kayak and a fully loaded cargo basket. I would recommend anyone to buy it. 525951

- INRT101-79

Review from a similar TBC Rack in Roof Rack

Once I received the product it was very easy to install and was exactly what i was looking for. With trucks it is problematic to have rooftop racks and nobody wants to have possessions bouncing around in a truck bed. With this rack I can easily remove my bike, skis or Kayak with little effort and the cost was an added benefit. Great product! 467024


Ask the Experts about this Inno Roof Rack

  • How to Carry 2 Canoes Side by Side on a 2014 Nissan Frontier SL with Factory Roof Rack
    One option for your 2014 Nissan Frontier is to use a truck bed rack such as # INRT101-65. This system includes bars that are 65 inches long. The canoes would sit on the bars right above the bed and would overhang the rear of the truck with this set up. Another option is a ladder rack such as # EM07705 with 66-3/8 inch long bars. The bars on these two systems are going to be longer since it sounds like the bars on your Frontier span the distance between the side rails so there is a lot...
    view full answer...

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Tyler C
Video Edited:
Kathleen M
Written by:
Lisa S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-8924