To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In-stock alternatives that can ship today
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2017 Toyota Camry, we'll be taking a look at the Inno Aero Roof Rack System. Part number for our cross bar is INXB108-2, for our Inno Flush Feet we're using INXS200, and for our custom fit for our Camry we're using INK872. The Inno Aero Cross Bars are low profile, aerodynamic cross bars that allow you to carry any roof rack accessory on your vehicles roof. The cross bars help to reduce wind noise and drag giving you a smooth and quiet ride. The weather strip on the inside allows for use of channel mounted accessories. You would just push the weather strip down to insert that in which is also going to help reduce that wind noise and drag when you have those accessories on top. These cross bars also accommodate the clamp-on style accessories as well. The Inno Cross Bars allow you to open up space inside your vehicle by carrying all of your accessories on your vehicle's roof.
These cross bars have a 165 pound weight capacity and are very easy to install. We'll show you how to do that now. Everything that you see here on the table comes with the kit. The only thing that you'll need to provide yourself is a flat tape measure of some sort. Here what you'll see our fit kit. We'll have our clamp and our rubber bottom that's going to go on the bottom of our foot pack.
We have our foot pack here with our two locking covers. One for this one and one for the one we already have installed on our bar. We have our bracket that comes with our cross bar. That's going to be inserted into the flat to secure our foot pack to our cross bar. We have a set of keys that's going to lock on our end cap.
Our two included tools to torque everything down. Then of course the added tape measure. Now to start off our install, we're going to take our bracket. Slide out this center piece here. We're going to slip in our bracket. It's going to slide in, and we want it to slide all the way down until it hits this stopper.
Then we'll take our foot pack. We're going to start by undoing this bolt here. We'll take our metal clamp. Set that in place, and tighten that down just a few turns so that it stays in place. Flip that foot pack over. We'll take our pad. I'm just going to slip that on the bottom making sure that there aren't any holes and that it's completely secured down. Now we'll take the entire foot pack. We want to line up these two notches with the two holes. Slide that in place, and slide it all the way out. We'll take the larger of our two included allen keys, and we're going to tighten down this bolt on the inside here. This is going to help keep our foot pack in place, and prevent it from sliding along our cross bar. With that tightened down, we're ready to open up the doors on our vehicle. We can load up our cross bar. Now we can take our cross bar. We're going to lay it across our roof, and just position it near the position we need it when we actually install it. Now measuring from the center door jam to the center of our clamp here, we're going to have 36 centimeters. We've got that in place. We'll fix the other side, and then we'll double check our measurements. Now we can grab our included tool and start to tighten these down. We'll take our torque tool. I like to hold my clamp up against the door jam, and we'll just tighten this down until the clamp sits up against our door. Do the same thing to the other side. Now I like to go back and forth doing about five to ten turns on each side until we have enough torque behind our bolts. When you hear that clicking noise, that's when you know you have enough torque behind our bolt. We just want to make sure we have the same torque behind our other bolt, and we'll be ready to put on our locking covers. With our doors closed, we can take our locking covers, place those on, and lock them into place. Now we're ready to load up our gear and hit the road. That's going to be our completed look at the Inno Aero Roof Rack for our 2017 Toyota Camry.
Average Customer Rating: 4.8 out of 5 stars (353 Customer Reviews)
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.Firstly, I need to thank Joseph ([email protected]) at etrailer. I needed a roofrack in a short period of time for a trip from MO to WA for summer vacation for my wife and kids to have extra storage. Joseph went out of his way to walk the warehouse to ensure the product I needed was easily accessible to get to for shipment. Joseph's customer service, knowledge of the products, and understanding of the logistics was incredible. I ordered the product on 25May and received my roof rack on 26May. My jaw dropped when it arrived so quickly. This is the customer service that makes it so if i ever need products offered by etrailer that I will order directly from your company and not browse Amazon for subpar products. Overall, I'm impressed thanks Joseph and the etrailer team!
It’s NOT good for a Toyota Camry. It put dents in the side rail (top of car) that it attaches to. The product it’s self works well and has held up outside of the foam tubing that protects your items from rubbing against the uprights.
Sierra K - 09/07/2021I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
Amazing! Great product and great servic e!
Review from a similar Fit Hooks in Roof Rack
Once again etrailer.com delivers. Finding a crossbar solution for my 2021 Lexus GX 460 was far more challenging than expected until I visited the site and found exactly what I needed. The fit kit worked great and the quality of the feet and crossbars on par or better than other brands (who dropped the ball on having a product available for this vehicle). The rack is on, secure and now carrying my Thule cargo box. Very happy.
Review from a similar Fit Hooks in Roof Rack
etrailer was great to order from! Going to the website makes it easy to see what roof rack will fit your vehicle. Ordering process was a breeze and the fulfillment updates were great. Ordered on the 13th and received it on the 16th so the FREE shipping was super fast. New installs of anything can always be challenging but once I read the the instructions it all went pretty smooth. Installing this Inno Roof Rack onto our 2021 Tacoma TRD Sport was pretty simple and took less than an hours from start to finish. Now we are ready to load up out Thule cargo carrier when we hit the road.
Review from a similar Fit Hooks in Roof Rack
Great fit for a 2015 Honda Civic SI. If putting a long boat (17' Mad River pictured), the Thule canoe clamps are recommended. Without them, highway speeds would be risky if at all possible. I was pleasantly surprised out how stable the boat was on the rack without the clamps.
Review from a similar Fit Hooks in Roof Rack
The Inno roof rack fit my 2014 Honda CRV very well. I used it immediately on a 500 mile trip and the rack is fantastic. I connected an XL Thule car box and 11'-6" paddle board to the rack and everything fit fine. The aero design is great and we did not hear any noise during the trip.
Review from a similar Fit Hooks in Roof Rack
I am more than pleased by the service that I had at etrailer. I was looking for a very old roof rack for my Subaru Legacy 2007 and etrailer had it. I was suspicius about it so I wrote them and got a quick and friendly answer that confirmed the fit and availability. Delivery was quick and the tracking from etrailer website was outstanding.
Review from a similar Fit Hooks in Roof Rack
Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.
Jenny N - 03/04/2022Review from a similar Fit Hooks in Roof Rack
Everything is good so far...the Inno rack system appears to made of good quality, fit and finish...it took about 2-hrs to get everything built, lined up, adjusted, tightened, loosened, repositioned, then retightened down...but I’m a bit of a perfectionist with things like this...plus I was checking my Saris cargo bin and various attachments, make sure that they’d all, which they do! And very well I might add...I just need to buy some new square carriage bolts for the channel now, along with new knobs...hoping that etrailer will get back to me with info soon...I will likely get a new wind deflector too...yesterday I did a test drive, was very pleased with the minimal whistling that occurred, and that was primarily between 30-40 mph and it was much quieter than my old Saris Roof Rack....after 40 mph the whistling got much quieter, very faint high highway speeds
Review from a similar Fit Hooks in Roof Rack
I purchased the Inno Rack system and Rhino Rack 581 saddles for my 2007 Mercury Montego. The instructions were easy to follow, and the rack is rock solid. It makes loading and unloading my kayak a breeze. I previously used roof pads and that was ridiculous compared to what this rack does for me now. I am amazed with how quiet with and without the kayak attached is - I don’t hear anything except the very slightest amount of wind with the windows open on the highway. I always have put a one turn twist in the bow and stern straps, but for the rest they’re all straight. I added an extra strap on the rear crossbar that goes behind the rear combing of my cockpit for extra security- but that’s just me. I’ve included a photo to show my setup. Thank you so much Mark S, Becky B, Carol C, and George J. etrailer rocks.
Review from a similar Fit Hooks in Roof Rack
Did it all by myself! Female Military Vet! Very happy! Thank you etrailer!!
Review from a similar Fit Hooks in Roof Rack
One side fits tight, the other doesn't. The instructions recommends a gap takes place between the roof and foot pads. The side with the gap slips even when fully tight. Will call Inno
Katrina B - 04/20/2022Review from a similar Fit Hooks in Roof Rack
We bought this along with the INTR - Inno Feet for Square Crossbars. We used this to mount Thule crossbars and a Thule Adventurer cargo box on a 2001 Subaru Forester. Everything fit perfectly. The Inno mounts were completely compatible with the Thule crossbars. The fast and accurate shipping helped avert a crisis before a cross country trip.
Benjamin - 07/23/2020Review from a similar Fit Hooks in Roof Rack
great price rack feet are well made
william w - 11/20/2021Review from a similar Fit Hooks in Roof Rack
I'm loving the roof rack , and Ashley from customer service was really helpful. Thanks e trailer. The reviews didn't lie.
Review from a similar Fit Hooks in Roof Rack
Inno has their act together. The only thing you need to install this rack is a box knife to open the boxes. The rack was a perfect fit. The instructions are easy to understand. It assembled quickly and is secure when installed on the roof.
Review from a similar Fit Hooks in Roof Rack
I ordered roof racks for our new to us car. Once I placed the order I decided I wanted longer cross bars. I cancelled the bars on the order but couldn't figure out to add the bars I wanted. I called etrailer and was connected to Ashley. Ashley helped me to get the bars I wanted. She kept in touch, letting me know about shipment, a slight delay in the shipment and when the shipment was expected to arrive. Ashly gave my purchase a personal touch that I really appreciated.
Review from a similar Fit Hooks in Roof Rack
These racks are great, I did a ton of research to find something that would work for me since I didn’t have roof rails on my Kia Sportage. There are a lot of small pieces so installation was a little intimidating but it went smoothly. I’m not planning on using them for a ton of weight and more for looks. I’m not sure how they’d hold up as functional racks.
Review from a similar Fit Hooks in Roof Rack
Awesome roof rack, it fits great on my 2018 chevy cruze. It took awhile to arrive, but I’m very please with it.
Review from a similar Fit Hooks in Roof Rack
etrailer was the only vendor who had the custom fit roof rack feet I needed for my vehicle. I was trying to put a roof rack onto a Dodge Durango SRT...not a typical vehicle for this accessory! I looked everywhere for a suitable roof rack and thought I was settling by ordering the Inno kit from etrailer. I could not have been more wrong! I am so happy with the purchase!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
ink872.aspx
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.