Yakima BedRock HD Truck Bed Rack - Aluminum - 300 lbs - 78" Crossbars
Item # Y01160-59
Our Price: $593.90
Confirmed to Fit
2010 Dodge Ram Pickup
1500 - 5-1/2 Foot Bed - without RamBox
1500 - 6-1/2 Foot Bed
1500 - 8 Foot Bed
2500 and 3500 - 6-1/2 Foot Bed
2500 and 3500 - 8 Foot Bed
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (15)
- Q & A (0)
- Photos
2010 Dodge Ram Pickup - Yakima BedRock HD Truck Bed Rack - Aluminum - 300 lbs - 78" Crossbars
- Truck Bed
- Fixed Rack
- Yakima
- Over the Bed
- Recreation
- Aluminum
- Fixed Height
Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.
Features:
- Low-profile truck rack lets you carry bikes, kayaks, cargo carriers, or a rooftop tent above your bed
- Leaves your truck bed free to carry more cargo like coolers or additional boats
- Keeps elevated gear within reach, making loading and unloading quick and easy
- Heavy-duty truck bed rack was designed and tested for both on- and off-road use
- Perfect for sports enthusiasts and weekend adventurers
- Versatile crossbars accommodate most Yakima channel-mount and clamp-on accessories
- Clamp-on equipment like bike racks, kayak carriers, cargo boxes, and roof top tents
- Mount accessories like off-road lights, load stops, or a ladder roller in the top channels
- Rubberized strips in the crossbars' top channels reduce wind noise and drag
- Built-in tie-down points on crossbars' endcaps make it easy to secure gear
- Adjustable towers with quick-release levers clamp to your bed rails - no drilling required
- Included adapters let you install the rack on a truck with a factory utility track system in the bed
- Etched measurements on crossbars help center the rack
- Same Key System (SKS) lock cores secure towers to your vehicle
- SKS cores can be swapped out to make all your Yakima products keyed alike
- Durable aluminum construction with powder coat to resist rust and corrosion
Specs:
- Application: most full-sized trucks
- Weight capacity:
- On-road: 300 lbs
- Off-road: 180 lbs
- Minimum crossbar spread for truck bed: 24"
- Tower dimensions: 7" tall x 5-1/2" long x 4-1/4" wide
- Crossbar dimensions: 78" long x 3" wide x 1-1/2" thick
- T-slot dimensions: 13/16" wide x 1/4" tall
- T-slot top opening: 3/8"
- Underbar slot: Full length
- Limited lifetime warranty
Yakima Off-Road Rating
This truck rack was tested to ensure that it is able to handle regularly adventuring over rough terrain. Yakima extensively tested it with worst-case-scenario lab simulations and real world driving to make sure it exceeded ISO requirements. This rack is built to handle evasive maneuvers, swerving, speed bumps, emergency stops, and whatever else you encounter while off the beaten path.
Y01159 Yakima HD Bar T-Slot Crossbars - Aluminum - Black - 78" Long - Qty 2
Y01160 Yakima BedRock HD Towers for Truck Bed Rails - Aluminum - 300 lbs - Qty 4
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Yakima BedRock HD Truck Bed Rack - Aluminum - 300 lbs - 78" Crossbars - Y01160-59
Average Customer Rating: 4.8 out of 5 stars (15 Customer Reviews)
Ideal for sports, recreation, and outdoor adventures - the BedRock HD keeps all your gear within reach. This low-profile truck rack carries bikes, kayaks, cargo baskets, or other gear above the truck bed and keeps the bed free for extra cargo.by: Tyson07/18/2023
The hidden T-Head that clamps under the bedrail is preventing the rack to be installed in the far rear of the bed of a Ram 1500 (I can’t speak for other trucks) due to divots Ram puts in the beds. Because I have to push the rear rack a little forward, it will create a tipping point for anything longer than 8’ long (Ram 1500 has a 5’5” interior bed length). The attached photographs is of a 6’ ladder, which fits perfect.
by: Mr. Langreck06/12/2020
2020 Toyota Tundra
Easy to install and adds multi use of accessories while leaving your bed open for other options. Mainly I purchased for camping, allows me to store bike racks on top of the bar while allowing me to load the bed chairs coolers and firewood etc. my truck is a 2020 Toyota tundra with the 6 1/2 foot bed and factory truck bed rail system.
by: John07/16/2021
2020 GMC Sierra 1500
I don't normally do reviews, but I was extremely impressed with etrailer's Service. I ordered the Yakima BedrockHD for my truck on a Friday afternoon. It shipped the same Friday evening! In doing research on this rack, etrailers information was excellent and helped me confirm the bar size. Received the rack the following Wednesday, the rack was just as advertised, fit my 2020 GMC Sierra perfectly and now I can haul my Kayaks above the bed and access my tailgate. Great product, mounts to my bedrail solidly. etrailer was great, I will be using trailers in the future.
by: Robert07/13/2021
2012 Chevrolet Silverado
Wasn't hard to install. Had it done in 20 minutes.
by: Felix01/28/2021
I received the racks , both packages, within two days after I ordered it. All the parts came inside the boxes with no missing parts. Appreciate how quickly it got to me! Really nice and simple purchasing process through etrailer! Will definitely get future items through them, specially the Yakima Overhaul HD rack that’s next on my list. I’ll post pictures after install.
by: Theresa 08/23/2021
Great product and great experience with vendor. Everything arrived faster than expected and in perfect condition. The product was as described and fit our truck. Very easy to install. We will be using the Bed Rack for an iKamper Mini we pick up next week.
by: Todd 10/30/2021
Well designed and works great
by: Matthew 08/05/2020
Etrailer got us our Yakima Rack way faster than we thought possible. Rack was in great shape!
by: V08/18/2022
I've had these for over a year and absolutely love them. very good quality and fit. i would buy these again.
by: Robert J06/15/2020
Great product, strong and well made.
by: Christian 07/30/2021
2020 Toyota Tundra
by: Martin 04/23/2021
2008 Chevrolet Silverado
by: Cindy 08/29/2021
by: Al08/02/2021
by: Robert 07/18/2021
2020 Ram 1500
15
15
See what our Experts say about this Yakima Ladder Racks
- Will The Yakima BedRock Fit on 2019 Tundra With 5.5 Foot Bed And No BedrailsWhile the Yakima BedRock Truck Bed Cargo Rack is a fit for your 2019 Toyota Tundra Crewmax with the 5.5 foot box, it's no longer available. The Yakima BedRock HD Towers for Truck Bed Rails - Qty 4 # Y01160 is its replacement and paired with the longer 78" bars # Y01160-59 is recommended for this shorter bed application. Included is an additional video resource for more information.
view full answer... - Recommended Truck Bed Rack for Rooftop Tent On a 2008 Ford F-250/F-350The Yakima BedRock HD Truck Bed Rack part # Y01160-59 is the perfect option for a 2008 Ford F-250/F-350 for carrying a rooftop tent over the truck bed. The system simply clamps on with no drilling required and features the heavy-duty crossbars. It also comes with locks for security.
view full answer... - What Yakima HD Crossbars Will Fit My 2000 Toyota TundraI double checked the Yakima website. They also say you will need the 78" crossbars for your 2000 Toyota Tundra. I also checked Thule's ladder racks and their crossbar is 71" long. Keep in mind that the difference between the two setups is the Yakima crossbars will extend 3" further than the Thule crossbars on each side. I think the 68" crossbars come up just a bit short. If you do not need a ladder rack, the Yakima BedRock HD Truck Bed Rack - Aluminum - 300 lbs - 78" Crossbars, part #...
view full answer... - Will the Yakima BedRock HD Fit a 2017 Toyota Tundra with the Factory Deck Rail SystemYes, the Yakima BedRock HD Truck Bed Cargo Rack part # Y01160-59 that you referenced is a confirmed fit for your 2017 Toyota Tundra with the factory deck rail system. We have talked to Yakima in the past and they said it won't interfere with the deck rail system. You won't need any wider brackets but you will need to use the long bracket included with the kit.
view full answer... - Can Yakima Bedrock Fit 2021 Nissan Titan with Utility TrackThe Yakima Bedrock part # Y01160-59 that you referenced does fit your 2021 Nissan Titan that has the factory utility track. I attached a picture that shows it installed with the track in place for you to check out as well.
view full answer... - Correct Yakima BedRock HD Truck Bed Rack for a 2004 Toyota TundraThe Yakima BedRock HD Truck Bed Rack part # Y01160-58 is not a fit for a 2004 Toyota Tundra as the 68" long crossbars are too short but the Yakima BedRock HD Truck Bed Rack part # Y01160-59 which contains 78" crossbars is a fit and will work well.
view full answer... - Can 78" Yakima HD Bars for 2018 Ford F-150 BedRock be Cut for Custom LengthThe Yakima BedRock HD Truck Bed Rack # Y01160-59 with the 78" crossbars is what Yakima test fit for your 2018 Ford F-150 and since the next size down is 10" less with the 68" HD Bars # Y01158 I am a little skeptical that the system would work. I reached out to my contact at Yakima who also had hesitations about the 68" bars fitting and they also said that ultimately you can cut the HD bars if you really want to but they don't really recommend doing that because you won't be able to fit...
view full answer...
- Carrying a Canoe with a 2018 Chevrolet Silverado 1500 Regular CabIf you have the regular cab on your 2018 Chevrolet Silverado 1500 then the two crossbars of a roof rack system will not be able to sit far away enough from each other to properly support your canoe. That is why you only saw the Yakima BedRock HD # Y01160-59 in the fit guide for roof racks. You can go with the BedRock HD, but if you plan on using the bed of your truck for gear then I have some other solutions for you. The Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar for...
view full answer... - Will The Yakima FrontLoader Wheel Mount Bike Rack Fit Onto Yakima BedRock HD Bars?Yes, the Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount # Y02103 will fit onto round bars, aero bars, and square bars such as the Yakima BedRock HD Truck Bed Rack - Aluminum - 300 lbs - 68" Crossbars # Y01160-58 or Yakima BedRock HD Truck Bed Rack - Aluminum - 180 lbs - 78" Crossbars # Y01160-59.
view full answer... - Will the Yakima FrontLoader Wheel Mount Bike Carrier Work With Yakima BedRock HDYes, the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 will work with the Yakima BedRock HD Truck Bed Rack like part # Y01160-59 no problem.
view full answer... - Which Length Yakima HD Crossbars for BedRock Truck Bed Rack for 2018 Ram 1500According to Yakima, the 68 inch HD crossbars would be too short, you'll need to use the 78 inch bars. The bars and the Yakima BedRock Towers are sold together in a kit as part # Y01160-59. The rack will have a 300 lb capacity, and you can see an installation video by using the provided link.
view full answer... - Rockymounts Tomahawk Compatibility With The Yakima HD CrossbarsYes, the RockyMounts TomaHawk Roof Bike Rack for Fat Bikes # RKY1222 is compatible with square crossbars like the Yakima BedRock HD Truck Bed Rack # Y01160-59 and will work great for you.
view full answer... - Roof Rack That Will Allow Rhino-Rack Batwing Awning To Be Installed On 2020 Chevrolet Silverado 1500The Rhino-Rack Batwing Awning - Roof Rack Mount # RR33100 is specifically designed to be mounted onto crossbars utilizing the top channel/track. Since your Yakima Aero Crossbars do not have the top channel then you will need a new roof rack setup. For your 2020 Chevrolet Silverado 1500 with either the regular cab, double cab or crew cab, go with Yakima BedRock HD Truck Bed Rack # Y01160-59; this has a weight capacity of 300lbs on-road and 180lbs off-road. This has built-in locks to secure...
view full answer... - Bed Rack System Fit For 2020 Ford F-150 With 5'7" Bed There is a rack system that will fit the 5'7" bed of your 2020 Ford F-150 which essentially gives you a roof rack in your truck bed. But instead of the rail system you described (which is not something you can do with this type of rack system), you'll simply get crossbars that mount to towers. There are two options: - Yakima BedRock HD Truck Bed Rack # Y01160-59 - Yakima OutPost HD Overland Truck Bed Rack # Y01152-58 The OutPost is the premium option that is more of a combination of...
view full answer... - Rails to Install Crossbars On Truck BedAlthough we don't carry a purpose-built stake pocket mounted rail system, we do offer a rack system that would mount to the bed sides without needing a track, thus accomplishing the same thing. You'd need the Yakima BedRock HD Truck Bed Rack, part # Y01160-59. The racks are lockable to the truck, to deter theft and have a whopping 300 lb capacity when the vehicle is on the road or a generous 180 lbs when used off-road. I've linked to a product demonstration video where my buddy Hayden...
view full answer... - What Rack/Kayak Carrier Do You Recommend for a 2013 RAM 1500?The most economic option for hauling kayaks on your 2013 RAM 1500 is the Yakima BedRock HD Truck Bed Rack - Aluminum - 300 lbs - 78" Crossbars # Y01160-59. The BedRock HD rack will fit crew cab, quad cab, and regular cab models. The BedRock HD includes adjustable towers with quick-release levers that clamp to your bed rails with no drilling required. As far as the carrier, I recommend the Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style - Folding - 1 or 2 Kayaks # Y04073....
view full answer... - Converting Yakima BedRock HD Crossbars To Work With RetraxOne XR Tonneau On a 2017 Nissan TitanYou will be able to adapt the bars from the Yakima BedRock HD Truck Bed Rack # Y01160-59 to fit the RetraxONE XR Hard Tonneau Cover # RTT-60752 for the 6-1/2' bed on your 2017 Nissan Titan. Since the towers with the BedRock require you to mount inside the bed rails they will prevent the cover from fitting. The RetraxONE XR comes with t-slot accessory rails that you will be able to fit four of the SkyLine Tower # 8880614 using 2 sets of Landing Pads # Y00221. You will then be able to move...
view full answer... - Ladder Rack Options For 2018 Ford F-150 With Crossover ToolBox On Bed RailsThe Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 is not adjustable along the bed rails and is not adjustable in height, although it can be installed in various positions in order to fit different sizes of truck beds. It is confirmed to fit the 2018 Ford F-150 you linked as your vehicle regardless if it has the 5-1/2 Foot Bed, 6-1/2 Foot Bed, or 8 Foot Bed. I think your best option is a roof rack so that you can have access to the entire truck bed along with the toolbox....
view full answer...
- Will The Yakima BedRock HD Towers Work With The Rhino-Rack Vortex Crossbars For Retrax XR?The Yakima BedRock HD Towers for Truck Bed Rails # Y01160 are only compatible with Yakima HD crossbars such as the Yakima HD Crossbars - Aluminum - Black - 55" Long # Y01156. These towers will not be compatible with any Rhino-Rack crossbars. The Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers # RRVA180B-RRRLT600 is only meant to be installed onto the Retrax XR Tonneau Cover rails, so if you want to use a truck-bed rack without the Retrax cover...
view full answer... - Best Roof Rack and Bike Rack for a 2016 Chevrolet Silverado 2500I'm happy to help with getting all of this figured out. There are quite a few variations of crossbars for the 2016 Chevrolet Silverado 2500, especially when considering all of the different brands. One of our best brands is Yakima, so I'll focus on them for your options. One thing you need to know is that your vehicle style can affect what's available for you. For the 2016 Chevrolet Silverado 2500, you need to know if you have a Crew Cab, Double Cab, or Regular Cab. If you have either...
view full answer... - Recommended Truck Bed Crossbars and Bike Rack for a Full Size TruckI would be happy to help you. There are a few ladder racks that use the stake pockets but for your application there's nothing with that style mounting method. I recommend the Yakima BedRock HD Truck Bed Rack item # Y01160-59. These crossbars attach similar to a bed liner or camper shell. They use clamps to secure them to your Silverado's bedsides. The included locks will help to prevent theft. The Kuat Piston item # KU32VR is a great option and would have more than enough capacity...
view full answer... - Load Extender Options For Carrying KayaksOf your options they all are going to get the job done. If you're wanting something that looks the best I would go with the Yakima LongArm Extender # Y01149. If you're not concerned with the looks go with the Malone Axis # MPG907. It has more ground clearance in it's lowest setting but it's width is only adjustable from 24 inches to 48 inches so it may not be wide enough for your application. The Erickson # EM07605 has a 51 inch width so be sure to measure your kayaks width to see which...
view full answer... - Do the WingBar Evo Crossbars # TH711520 Come with the Evo Clamp Feet # TH710501?The Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2 # TH711520 only come with the crossbars. They do not come with the Evo Clamp Feet # TH711520. If you want to add components for a complete roof rack, you will need these parts in addition to the crossbars for your 2019 GMC Sierra 1500 (crew cab and double cab only): - Evo Clamp Feet for Thule Crossbars - Naked Roofs - Qty 4 # TH710501 - Fit Kit for Thule Evo Clamp Roof Rack Feet - 5071 # TH145071 - (Optional for extra...
view full answer... - Recommended Tonneau Cover And Short Ladder Rack For A 2018 Ram 2500The Yakima BedRock HD Truck Bed Rack # Y01160-59 clamps onto the lip of the bedrails so it wouldn't be compatible with a tonneau cover t-slot, but I do have an alternative for you. The Yakima OutPost HD Overland Truck Bed Rack w/ Tonneau Cover Adapter # Y01152-5855 is able to slip into the t-slots of certain tonneau covers and has 13" tall uprights so that you can load your accessories easier. For the cover I recommend the RetraxONE XR Hard Tonneau Cover # RTT-60232. This comes with a...
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Andrew K
Video by:
Aidan B
Video by:
John S
Video by:
Thomas T
Video by:
Charles A
Video by:
Samuel H
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Carrie F
Edited by:
Daron K
Test Fit:
Ed W
Test Fit:
Adam E
Test Fit:
Robert O
Test Fit:
Ethan H
Test Fit:
Matthew B
Written by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Todd
10/31/2022
Still working out great and withstands the weather while installed in the truck for most of the year in the Georgia heat.