bing tracking image
  1. RV and Camper Bike Racks
  2. Stromberg Carlson
  3. Tongue Mount Hitch Rack
  4. Fat Tire Bikes
  5. 2 Bikes
  6. Travel Trailer
Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs
Stromberg Carlson

Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs

Part Number: CC-275
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$144.95
Retail:$262.01
You Save: $117.06
RV and Camper Bike Racks
Add to cart
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Want to carry your bike rack with bikes while towing your trailer? No problem! The Bike Bunk mounts on your A-frame trailer tongue. It is designed for bike racks that fit 2" hitches and are approved for use behind an RV. Capacity is 100 lbs. Great Prices for the best rv and camper bike racks from Stromberg Carlson. Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs part number CC-275 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (134)
  • Q & A (0)
  • Photos
  • Used (2)

Stromberg Carlson RV and Camper Bike Racks - CC-275

  • Tongue Mount Hitch Rack
  • Fat Tire Bikes
  • 2 Bikes
  • Travel Trailer
  • Hanging Rack
  • Platform Rack
  • Stromberg Carlson

Want to carry your bike rack with bikes while towing your trailer? No problem! The Bike Bunk mounts on your A-frame trailer tongue. It is designed for bike racks that fit 2" hitches and are approved for use behind an RV. Capacity is 100 lbs.


Features:

  • Durable rack allows you to tow a trailer while carrying a bike rack and its bikes
    • Mounts on your A-frame trailer tongue
    • Designed for use with 2" hitch-mounted bike racks that are approved for use behind an RV
  • Sturdy, all-steel design
  • Made in the USA


Specs:

  • Capacity: 100 lbs
  • Distance from top of A-frame trailer to top of cross tube: 33-1/2"
  • Fits A-frames with widths between: 12" - 52"
  • Mounting bracket dimensions: 8" tall x 4-3/4" wide x 2" deep


Maximum and Minimum Frame Widths

Note: The Bike Bunk is only intended to hold a 2" bike rack that is approved for use on the back of an RV. Your application will be determined by turning radius and positioning of the rack.




CC-275 Stromberg Carlson Bike Bunk Trailer Mounted Bicycle Rack Carrier for A-Frame Trailers - 2" - 100 lbs

Installation Details CC-275 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs - CC-275

Average Customer Rating:  4.6 out of 5 stars   (134 Customer Reviews)

Want to carry your bike rack with bikes while towing your trailer? No problem! The Bike Bunk mounts on your A-frame trailer tongue. It is designed for bike racks that fit 2" hitches and are approved for use behind an RV. Capacity is 100 lbs.

by:

Unconventional Use. This was purchased not to hold bikes but as a frame to hold flag poles which were affixed to it with off the shelf hardware. The actual receiver tube will be used for a custom camp site sign identifying our family.
Overall the frame exceeded our expectations for quality and functionality. I cannot comment on its originally designed use, but for what we use it for it was the perfect choice.

Chris I. profile picture

Chris I.

5/23/2024

Its been a year or so since getting this rack and it is holding up as good as the day it was installed. There are no welding cracks or rusting so it was coated good from the factory. As expected the paint is dulling a bit from being outside all the time but that doesnt detract from the functionality of the product. I would still recommend this rack.



by:

I ordered one of these a year ago and it arrived with critical welds missing. I contacted the manufacturer directly and they sent me a brand new unit.

Mounting was easy (with the right tools). I did swap out the crummy fasteners that they supply for attaching to the trailer tongue with grade 8 yellow zinc plated fasteners from [online]. It is holding up great and makes bike carrying super easy. I like that I can see them in the rear view mirror and see if anything is coming loose.

I used a cheap bike rack on this and flipped the arms of the rack around rearward to keep the bikes close to the front of the travel trailer. This also allows me to fully open the hatch of my tow vehicle when the bikes are mounted.

So overall this is a nice addition that avoids trying to mount anything to the flimsy rear bumper of the travel trailer, although it does add some tongue weight. I am super happy with it so far and it looks nice a year later despite having sat outside 100% of the time.

James profile picture

James

3/22/2023

This is holding up great after two years of being installed. I am very happy with it.



by:

Had this over a year now and zero issues. Works well holding 3 full size bikes. Or 2 adult and 2 childrens'. Very strong. I dont think it will clear 30lb LP tanks. There was a bit of slop between the mounting plates and the Lippert frame enough to justify some tack welds to mitigate any movement. E trailer was outstanding and had the best selection and attantion to detail.



by:

Service was excellent. The quality of the metal is very good. However, there were no instructions, just a single diagram. (It would have been nice to know that drilling into the thick metal tubes was required.) Lastly, The bolts had 14 mm heads on them while the nuts were 1/2" and the bolts are listed in inches.
I have been experiencing poorly represented items and instructions lately from mail-ordered items. My guess is that the items are coming from overseas (China?) with poor attention to detail. I would appreciate if etrailer.com would correct this for this item and ensure that all items that they sell were free of these defects. Other than the issues above, this item is of excellent qulity and well-worth the asking price. The company appears very personable and, as said above, their service to me was excellent. I would like to continue using them in the future.



by:

I was looking for a way to mount a bike carrier on my 2016 Flagstaff Superlite TT. Due to the low ground clearance (14" rims) I couldn't relocate the rear bumper mounted spare underneath travel trailer. Tow vehicle is 2015 Ram 1500 4x2. Settled on the SC Bike Bunk plus Let's Go Aero BikeWing2 mounted as far back on front frame as possible so the bike bunk clears the propane bottle cover and maximizes distance between back of truck and bikes when turning. Success! I also made spacers ( bar stock from Home Depot cut down & painted black. see pic) which raised Bike Bunk up another 3/4" (every little bit helps!). My 26" wheeled bikes have 5.5" clearance above tailgate top. 29er will only have 2.5". No issues on flat ground whatsoever; concern may be up & over curb turning into gas stations with 29ers (not tested yet); 26" bikes no clearance issues experienced at all. Hint: GoAero rack tilts forward so I use trailer electric front jack to lower the whole front of trailer down when loading & unloading bikes. Easy peasy no step ladder. required!

Ronmlb profile picture

Ronmlb

10/31/2019

Half dozen trips since purchasing Bike Bunk & GoAero combo. Works great. No clearance issues even with one 29er + one 26 bike.



by:

Great fit on my travel trailer. Took experts advice and purchased a Let's Go Aero Veeme V2 bike rack. Very pleased with both products. A safe way to carry our bikes while rv ing.
Thanks etrailer experts for this solution. Both items easy to install and are very strong. The bike rack is easily moved to the receiver on my truck.

Peter G. profile picture

Peter G.

11/1/2015

I have a 2015 Wolf Pup. It is very similar to your trailer! I am towing with a Silverado. Are you having any issues with turning radius with bikes hitting tailgate.

Gary M. profile picture

Gary M.

11/4/2015

No problems with turning radius interference, also towing with a Silverado.



by:

Easy to assemble. Because we have a toy hauler for motorcycles, we didn’t have a back bumper on the camper to place a bicycle rack. This was a great alternative. Little different with loading and unloading but they don’t interfere with turning and they ride really nice.

Al T. profile picture

Al T.

5/13/2020

Great. Having a toy hauler and not having a bumper on the back due to the ramp door, it was a great alternative. Even though it is a little high, it is not that bad getting up on your tailgate to put the bikes in place.



by:

Great sturdy product. Just returned from a camping trip. 300 miles each way. Not a worry about bikes. Can now open cargo door on tow vehicle. Pic showing frame and 2 bike rack.

Mark J. profile picture

Mark J.

7/9/2018

Absolutely love the bike rack. Made a few modifications to fit the tongue of our T@B. Sending a pic. Your customer service and products are top notch. Thanks again



by:

This product has been a great way to carry our 2 bikes (1 mine, one my wife's). The install was fairly easy (it helps
If you have 2 people to line things up, hold while drilling, etc).

The best thing about this rack is being able to easily keep an eye on the bikes while traveling, whether driving or parked. I considered those bracket braces for the rear trailer bumper, but at the end of the day: (1). My trailer bumper doesn't look like it will handle torsion well, even with supplemental bracing; (2). The spare tire (already on the trailer bumper) got in the way; and (3). My bikes aren't cheap and I like being able to keep an eye on them.

Thanks etrailer for your excellent videos and online advice!



by:

Perfect setup for what we needed. Installation issue - need longer bolts.
Used the Swagman XP 3-bike hitch mount rack and carried 2 bikes. Drove close to 1,300 miles last year with the bikes on and had no issues. On-loading and off-loading bikes is very easy with a pickup truck - dropped tailgate is just the right height.



by:

Getting to try out the Stromberg Carlson bike bunk that I installed on the trailer hitch frame.
Using it with a Go Aero V2 bike rack that I can use on the trailer or the truck. It works great!
The bike rack is easy to transfer weighing only 12 pounds and no movement of bikes at all during travel.
Very happy with this combo from etrailer.com



by:

I bought this because I couldn't figure a good way to bring my bikes with us on vacations when we also brought our jet ski trailer. I looked at all sorts of different ways to try and get a bike rack and a trailer on my truck at the same time, and finally came across this. While it's not on a travel trailer like it was intended, it works perfectly for our needs. It fits right above the storage box holding our life jackets and other stuff, but gives enough room for the hatch to open up and let us retrieve the items. I paired this with a Lets Go Aero BikeWing and now I can bring the bikes, the jet skis, and still keep the truck bed free for our mattress and camping gear. If you are trying to find a way to bring your boat and bikes to the lake at the same time, and are towing with an SUV or a truck with a full bed, this is the perfect fit.



by:

I bought the Stromberg because I wanted to bring bikes and my golf cart to Vintage Trailer Rallies. The Rack is stout. It is easy to install. I do not mind it visually when not in use either as I believe it offers some protection to my propane tanks. 1977 Silver Streak, 1972 Golf Cart, 2021 Stromberg Rack!



by:

Okay, shy of taking it out on the road (trip upcoming in a couple of weeks) I like it. Well built and sturdy. The install was a bit more complicated on one side that the other as there were some electrical issues and lines I had to deal with but that doesn't detract from the product. The one issue I had was one that has been written up by others that have installed it and that is that there are 2 bolts included that are just too short for their intended purpose by about 1/4 to 1/2 inch, so I had to run to re hardware store to replace. Other than that the install went smooth and the results I'm quite happy with. Oh yeah the tube sitting in on channel fit a bit tight but a spray of WD-40 fixed that right away. Bottom line, as it stands today without testing it on the road, it appears to be an excellent product. Road test will be the telling tale.



by:

Seems to be sturdy, time will tell, easy install.

Jay profile picture

Jay

7/14/2024

Honestly havent installed it yet. My purpose for getting this is to mount two more propane bottles on top of it. I have the...I believe the stromburg generator platform for the tongue and it is on. Im going to have to modify the mounts for the bike rack to fit not because of manufacturer problems but because of what room I have left to mount the rack on the tongue....again my puzzle to solve. I only have room back by the battery box towards the nose cap of the camper. The only real reason I havent installed yet is because I live in my camper year around during the week only for work and havent had the camper in my driveway on a weekend to work on it. Itll take a bit more than bolting on. It will work well and I like the product, am I using it for what its intended, nope.

ChrisR profile picture
Etrailer Expert

Chris R.

7/15/2024

@Jay Thanks for sharing! Would love to see pics once you have it setup - we love creative solutions.


by:

Prompt service and delivery. Product was exactly what I expected. Installed easy and is very adjustable to fit different angles. Really neat design to accommodate different positions. Note that you will have to drill 4 holes but it makes sense that this is necessary to make it so adjustable/customizable. I would definitely recommend this product. This allowed us to keep spare tire on rear bumper and free up trunk camper space.



by:

Quickly shipped, arrived on time, watched the how-to video on the product page, and then installed it in under an hour. Sturdy is an understatement for this product. The rack itself does not interfere with access to anything on the A frame. The bike rack interferes with the propane tank cover but not the top access on the cover so I can still turn on/off the tanks and such. I couldn't be happier at this point and will update after the test drive.



by:

I bought this bike bunk to mount on the tongue of my R-pod camper. I carry 2 bikes on it, and I love having them right in my view as I drive along. I have very little bounce with this unit. Oh, BTW the bikes sit just high enough that they go over the tailgate on sharp turns.



by:

The delivery was very quick and both items arrived at the same time and in excellent condition. We were able to put it on our travel trailer with no problem and it went together very easy! The bike rack was also very easy to put together and once we figured out the best way to put our bikes on it we were really pleased! We are looking forward to using it this weekend! Thank You, this really helpedus solve our problem of taking our bikes.



by:

This has been fantastic. It's high up to get bikes on and off but I like them there better then on the back of camper. Everyone we talked to at E trailer was awesome!!! Thank you.



by:

Just mounted the rack today. It was very easy to assemble. Tried a couple of places to get the best fit so I can get to my propane tanks. Only took about 45 min to mount. Put the bikes on but have not pulled the trailer with the bikes in place.



by:

FYI etrailer Folks.....I could not get the "Add Photos/Videos" to work. But your video is much better than my photos.....Rocky P Here's my review.....

Three years in, this Stromberg Carlson Bike Bunk has worked very well mounted toward the back of the A-frame trailer tongue just in front of our Forest River RPOD 190 RV carrying two ordinary mountain bikes using an older 1996/97 very husky Yakama GetAway 2-bike carrier that is "off-road-able" (per Yakima) and that fits the Bike Bunk 2-inch receiver. The only mod I made to the Bike Bunk was to replace the SAE Grade 2 bolts and ordinary nuts (not lock nuts) it came with with SAE Grade 8 bolts and lock nuts due to the leverage strain put on the mounting bolts from such a low mounting position with most of the weight up top. I wanted sturdier (maybe over-engineered!) bolts and lock nuts (won't come loose with vibration). The only disadvantage to this up-front mounting position is that it adds about 100 pounds to the tongue weight including 2 bikes plus carrier. But the BIG advantage is far far less whiplash on the bikes compared to a rear-trailer mounting position. Plus you can keep on eye on your bikes that you can't do with a trailer rear mount. You also have to be somewhat of a stunt artist standing on the A-frame behind the Bike Bunk & carrier to then pick up the bikes and get them up and onto the bike carrier. OR.....standing on the ground in front of the Bike Bunk & carrier, reach up to set the bikes on the carrier. It helps to be taaall with looong arms or use a "cheater" short stool or something else sturdy to stand on. I still have to get up on the A-frame to lock the bikes, but that's not a big deal. Overall, it's a great idea for carrying bikes up-front with far less whiplash on the bikes compared to a rear trailer mount plus being able to keep an eye on them.



by:

We just took our first trip and the bike rack worked just as we had hoped. It is a little difficult and takes two people to keep it mounted straight and then drill the holes when installing. A few things I realized is that the holes are not drilled into the camper but into the posts to keep the arms from spinning. Also make sure you know you’ll need a bike rack as well, this is just the mount for that. Overall worked well and kept the bikes high and away from camper in my tailgate.

Rob profile picture

Rob

5/31/2023

1yr out update - Highly recommend this to anyone. Need to be a little handy to install but once on, it is very stable. Still holding up well and i can even stand on it to work on the front of the camper with no issues supporting 225#.



by:

It's a good product. It works as intended. The load rating is kind of low and I wouldn't use it for EBikes as you would almost certainly exceed the load rating.



by:

Very pleased with the service; package arrived in 2 days! Super impressed with the "stout" build of the Bike Bunk; very, very solid and rigid once installed. Installation took some time due to having to drill the holes per the directions, but was not difficult.


25
134
Show More Reviews

See what our Experts say about this Stromberg Carlson RV and Camper Bike Racks

  • Difference Between Stromberg Carlson CC-275 And Swagman Straddler S80503 A-Frame Bike Racks
    Hello Tyler, great question. The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack # CC-275 and the Swagman Straddler # S80503 are quite similar. They are essentially two different manufacturers version of the same A-frame mounted bike rack. Aside from a few minor design differences, they have the same weight capacity and will mount in the same location. The Swagman Straddler # S80503 has a more solid design with the receiver welded to the top of the crosstube rather than the bottom....
    view full answer...
  • Bike Rack Recommendation for the Front of an A-Frame Trailer
    First you will need a receiver on the front of the trailer if you want to use a hitch bike rack. We actually have the Bike Bunk # CC-275 but it is limited to 100 pounds total weight. Otherwise what I recommend is to use # D210 which has a receiver and ball mount platform allowing you to tow the trailer and carrier a bike rack with bikes. We also have a towing bike rack, the Curt Clamp-On 3-bike rack # C18013 that you might be interested in. If you keep the bikes on the tow vehicle then...
    view full answer...
  • Having Enough Clearance to Use the Bike Bunk # CC-275 between a Travel Trailer and Camper Shell
    As far as affecting the turning radius, it is possible that mounting the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 with your 30-inch bike rack can interfere with your camper shell. As far as being able to open your camper shell, even though it is highly unlikely, there is no way to determine that without knowing the distance between the trailer and the truck, the lid length of the shell, and the measurement of your bikes' pedals and handlebars....
    view full answer...
    Image 1 for Image 2 for
  • Will Stromberg Carlson Bike Bunk Work to Carry Two Bikes
    You can definitely use the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 to carry a bike rack that holds a pair of bikes so long as your Jayco Sport has an A-frame width between 12" and 52". It is also definitely low enough to handle after removing the bike rack; the top of the Bike Bunk is only 33" (or less than 3') from the top of the trailer frame.
    view full answer...
    Image 1 for
  • Bike Transport Options When Towing a Pop-Up Trailer
    If you have an a-frame type trailer frame a great option for transporting bikes is the Stromberg Carlson Bike Bunk # CC-275. This bolts on to a trailer's frame and fits frames from 14- to 55-inches wide. It provides a 2-inch receiver opening that can accept an RV-rated 2-inch bike rack. RV-rated bike racks are shown on the linked page. Please note that you cannot use a standard car bike rack on a trailer, it must be rated for RV's. The trunk-mount Yakima FullBack 2 # Y02634 is a confirmed...
    view full answer...
  • Comparing Carrying E-Bike Rack at Front and Rear of RV
    It's not uncommon for people to use bike racks in front hitches like you are asking about. You wouldn't want to put a bike rack cover on the setup though as it would whip around pretty violently no matter how tight you thought you could get it which would damage the bikes, the rack, and possibly the front of the truck. This also would block more air flow to the radiator. Unfortunately, your # HLY84FR is not compatible with front mount hitches. That said your bike rack is approved for use...
    view full answer...
  • Installation Instructions For Stromberg Carlson Bike Bunk Trailer-Mounted for A-Frame Trailers
    I have attached a copy of the page from the installation instructions for the Stromberg Carlson Bike Bunk Trailer-Mounted for A-Frame Trailers, part # CC-275. I have also attached a link to a product review video for this carrier you can check out. The installation instructions are available on the product page for the CC-275 on our website.
    view full answer...
    Image 1 for
  • Would the Stromberg Carlson Bike Bunk Trailer # CC-275 fit a 2016 Lance 1685 TT
    I looked up pictures of your 2016 Lance 1685 TT and it looks like it was build on a standard A-frame so the Stromberg Carlson Bike Bunk Trailer # CC-275 that you referenced would fit and work well for carrying a bike while towing. I attached a review video for this for you to check out as well.
    view full answer...
  • Does Skid Shield have to be Removed for a Front Hitch on a 2018 Toyota Tundra
    On the Curt front mount receiver # 31198 there is a note stating that the skid shield will either have to be removed or you can trim it and reinstall in on your 2018 Toyota Tundra. For the Draw-Tite receiver # 65080 we have a note stating that the skid shield must be removed but nothing about being able to reinstall it. Some customers have noted that they had to make or enlarge a hole on a bottom panel in order to be able to change the oil. You may also consider using the Bike Bunk,...
    view full answer...
  • Compatible Trailer Frame Widths for Using Stromberg Carlson Bike Bunk # CC-275
    Thank you for providing a photo of the A-frame on your 2016 Riverside trailer. You will be fine using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 since it will work on A-frame trailers from 14- to 55-inches wide, as measured from the frame's outside edge to outside edge. This bike rack carrier works with 2-inch hitch-mount carriers like the Curt # C18030 4-bike rack, which is rated for 180 pounds of bikes.
    view full answer...
    Image 1 for
  • Stromberg Carlson Bike Bunk Used With Pop-Up Camper
    When the Stromberg Carlson Bike Bunk Bike Rack Carrier for A-Frame Trailers, # CC-275, is being used with a pop-up type camper, its removal is completely dependent on height of your trailer. Many of the high wall and hard wall A-frame pop-up campers do not require the removal of the Bike Bunk but it is a height issue with others. Another option is the Swagman Roamer LT Roof Rack for Pop-Up Campers, # S80510.This roof rack provides an inexpensive way to haul bikes, kayaks and other...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Recommendation For Carrying 4 Bikes On Rpod 182 Camping Trailer
    For you to be able to carry 4 bikes on your Rpod I recommend the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier, part # CC-275. This carrier is designed to fit a-frame trailers and use a 2 inch bike carrier. The mounting brackets measure 8 inches tall x 4-3/4 inches wide x 2 inches deep, and it has a weight capacity of 100 lbs. The bike carrier I recommend to use with the CC-275 is the Swagman # S64400 Original 4-Bike Carrier. This is designed for 2 inch receiver openings...
    view full answer...
  • What is Height of Stromberg Bike Bunk Above Trailer Frame
    From the top of the trailer frame to the top of the Stromberg Carlson Bike Bunk # CC-275 measures 33 inches. The drilling required is for the uprights so that they mounting hardware fits through them at the right angle for your trailer.
    view full answer...
  • Erickson Big Bed Junior Load Extender for carrying a canoe
    The Erickson load extender # EM07605 is a gread extender. I would strongly recommend using an substantial anti-rattle device when using a load extender like this because they do tend to move quite a bit. For an anti-rattle device I recommend # BX88224 because it reduces/eliminates movement vertically and horizontally. A dual hitch receiver is not recommended because it will reduce the vertical load capacity of the front mount hitch by 50 percent not to mention it is going to push the...
    view full answer...
  • Will Stromberg Bike Rack Bunk CC-275 Fit a 2014 Bullet Premier Camper 19FBPR
    The # CC-275 will fit your trailer. It can fit frame width ranges of 14-55 inches and would fit a trailer frame member that is 5 inches tall. You should note that this won't leave you much room between your tow vehicle and trailer nose since your nose sticks out so far.
    view full answer...
    Image 1 for
  • Recommended Bike Rack to Use with the Stromberg Carlson Bike Bunk
    I have a great option for you. When using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 there are a few parameters you will need to stay within. The bike rack needs to be travel trailer rated, fit a 2" hitch and the combined weight of the bike rack and your bikes needs to be less than 100 lbs. Given these parameters I recommend the Lets Go Aero NEO2 2-Bike Rack # B01748. This 2 bike rack is the lightest weight of the racks that are rated...
    view full answer...
  • Options for Towing Trailer and Carrying Bike Rack on 2009 Ford Escape
    We do not have a dual receiver hitch for your 2009 Ford Escape with a 1-1/4 receiver hitch, however we do have several excellent options for you. You can use a Class III hitch like the etrailer Trailer Hitch Receiver, # e56AR. Check out the installation instructions that I have included for you. With this hitch you have the option of using a Hitch Mounted Towing Bike Rack # S64675. This rack fits firmly over the ball mount of your 2" receiver, enabling you to tow your trailer while carrying...
    view full answer...
  • Can Weight Distribution Hitch Be Used with Hitch Extender Like
    A hitch extender or adapter, like the dual-receiver MT70070, cannot be used with weight distribution (WD) systems. As you note, use of ANY adapter has the unavoidable side-effect of cutting your hitch's capacity by 50-percent. An adapter would prevent the WD system from doing its job of shifting trailer tongue weight forward to the Dakota's front axle to keep your braking and steering performance intact. But we do have better alternatives for you. If you have an a-frame trailer with available...
    view full answer...
  • Will the Bike Bunk from Stromberg Carlson Work on my 4" x 4" Camper Bumper
    Yes the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers part # CC-275 will work with your 4' square bumper. It has mounting brackets that are 8" tall x 4-3/4" wide x 2" deep giving you a great fit.
    view full answer...
  • Recommended E-Bike Rack and Hitch for a 2013 Lance 1575 Travel Trailer
    There are not many bike racks rated to be used on a travel trailer and only one capable of carrying 60 lbs bikes. You're going to want the Lets Go Aero V-Lectric FAT PRO Bike Rack for 2 Electric Bikes item # LGA77FR. This is a wheel mounted bike rack that has an 75 lbs per bike capacity. It fits tires that are 2-3/4" - 4" wide. This is a hitch mounted bike rack that fits class III 2" hitches. I have linked a review video below so you can see all the functions of this bike rack. If you...
    view full answer...
  • Troubleshooting Difficult to Install Bike Rack Into Stromberg Carlson Bike Bunk
    Sometimes the powdercoat in a hitch opening like what the Stromberg Carlson part # CC-275 can be a bit too thick for accessories to fit into. I had a similar situation with a new hitch I installed on my Tahoe. What I had to do was file down the powdercoat a bit to allow it to fit well.
    view full answer...
  • Option For Carrying Bike Rack and Towing Trailer When Dual Hitch Adapter Doesnt Have Enough Drop
    The only drop the dual hitch adapters we offer like the MaxxTow part # MT70066 have is 2-1/4 inches. Sounds like you may be looking for a solution to tow your trailer level and carry a bike rack. For that you can use the Stromberg Carlson Bike Bunk part # CC-275 which attaches to the a-frame of the trailer and gives you a hitch opening you can carry a bike rack in. I attached a review video for this adapter as well as a review video that shows how it works as well.
    view full answer...
    Image 1 for
  • Will the Swagman XP Work With the Stromberg Carlson Bike Bunk
    The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier part # CC-275 has a weight capacity of 100 lbs. The Swagman XP part # S64970 weighs about 45 lbs therefore you have 55 lbs left over for your two bikes. However, the Swagman XP is not rated for use on a trailer so I cannot recommend this. Instead, I recommend the 2 Bike Hitch Mounted Folding Rack part # 63120 which only weighs 25 lbs so that then leaves you with 66 lbs for your two bikes. The 2 Bike Hitch Mounted Folding...
    view full answer...
  • Options for Trailer Tongue Mounted Spare Tire
    Using the Stromberg Carlson Bike Bunk, # CC-275 for a spare tire carrier, but instead of attaching a bike rack to the 2" receiver you use the etrailer Hitch Mounted Spare Tire Carrier for 2" hitches, # e98ZR is a viable option. It sounds as if you have ruled out the following type spare tire carriers will working for your needs. But just incase, I will list out a few options to consider. The Demco Spare Tire Carrier for up to 4" Trailer Tongue, # DM15851-76 in black. Or, the Demco Spare...
    view full answer...


< Previous
123. . .14



Do you have a question about this RV and Camper Bike Rack?


Used Items Available
Used Picture for Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

$130.95
Add to Cart
Secure Checkout
Used Picture for Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs
Used Picture for Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs
Used Picture for Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs

Condition: Installed

Notes: Item has been installed/test fit.

$140.64
Add to Cart
Secure Checkout

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Sarah H
Expert Research:
Sarah H
Employee Victoria B
Expert Research:
Victoria B
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Laura H
Written by:
Laura H
Employee Hayden R
Installed by:
Hayden R
Employee David F
Installed by:
David F
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.