TorkLift RV and Camper Steps
- TL52SR
- 4 Steps
- Fold-Down Step
- Towable Camper
- 26 Inch Wide Door
- TorkLift
- Aluminum
- 7-1/2 Inch Drop/Rise
- Ground Contact
These aluminum steps attach to the door frame on RVs that do not have a step well installation point. 4-Step design extends to 5 steps with pull-out booster step. Fine-tune height and level stairs with landing gear. Glow tape lights step surface.
Features:
- Pull-out steps make it easy to get into or out of your trailer or RV
- Designed specifically for vehicles that do not have a step well underneath the entryway
- Scissor design lets you manually collapse steps and fold them up for travel
- Booster step allows you to extend the steps from a 4-step design to a 5-step
- Lever releases booster step for extension
- Landing gear creates a stable connection from the bottom step to the ground
- Adjustable legs help to stabilize stairs on uneven terrain
- Large rectangular footplates provide level support and help prevent sinking into ground
- No assembly required - landing gear comes pre-installed on the bottom step
- Locking tab on side of step frame bracket slides into the doorframe to keep the steps from accidentally deploying
- Steps feature 15" of elevation adjustment
- 7-1/2" With the booster step; 7-1/2" with the landing gear
- Glow tape creates lighted step surface for safely climbing into and out of your camper at night
- Adheres to sides of step platforms
- Glows in the dark for up to 10 hours with only 5 minutes of light exposure
- Aircraft-grade aluminum and stainless steel construction is durable and rustproof
- Built-in SureGrip tread on step surface provides excellent footing
- Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps
- Bushing bearings offer smooth action and are longer-lasting than standard riveted connections
- Installs on your RV's door frame, avoiding damage to floor or exterior
- Made in the USA
Specs:
- Entry height: 34-7/8" to 42-3/8"
- Doorway width: 26"
- Drop/Rise: 7-1/2"
- Weight capacity: 325 lbs
- Lifetime limited warranty
Will Torklift GlowStep Revolution Uprising Steps Work for You?
Fold-down steps are typically installed on travel trailers and some RVs. The fold-down steps from Torklift lift up to latch into your camper's doorway for storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
![Uprising]()
The Torklift revolution Uprising Steps install inside your camper's doorframe. Measuring for this may seem tricky, but once you know what to look for, figuring out the right fit for your RV doorway is easy.
First, you will need to measure the doorsill plate, both the height and the clearance between it and the bottom of the door. For the Revolution Uprising steps to fit, the doorsill height should be between 5/8" and 3/4", and the clearance should be at least 3/8".
![Torklift]()
Next measure between the door frame flanges - the doorway width - to determine the step size that will fit into your camper's doorway. You will need a doorway that is at least 26" wide for these steps to work.
If it turns out you have a narrower doorway, there are smaller step assemblies available that fit 24" wide doorways. A full list of the available steps is below.
The doorway threshold will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
![Uprising]()
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.
The chart below displays entry height measurement ranges in the first column. If you determined you need a mounting bracket that fits a 24" doorway, the step part numbers with that width are in the second column. If you determined you need a bracket that fits a 26" doorway, the step part numbers with that width are in the third column. Choose the doorway width that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 24" Doorways | 26" Doorways | 28" Doorways |
|---|
| 19-7/8" - 27-3/8" | TLA9103 | TL85SR | TLA9003 |
| 27-3/8" - 34-7/8" | TLA9104 | TL25SR | TLA9004 |
| 34-7/8" - 42-3/8" | TLA9105 | TL52SR | TLA9005 |
| 42-3/8" - 49-7/8" | TL77YR | TL32SR | TL64YR |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Place the mounting bracket into the camper doorway
- Extend until feet touch the ground
- Attach the door brackets to the main mounting bracket with the included hardware
- Center the steps in the doorframe
- Slide assembly forward until the two door brackets touch the inside of the doorframe
-Make sure the brackets are flush against the doorframe and the floor
- Drill holes through both sides of the doorframe
- Secure the door brackets to the doorframe and the floor with included hardware
- Push the main bracket forward until the vertical piece makes contact with the threshold
- Torque the hardware to 25 in-lbs
A9305 Tork Lift Glow Step Revolution Uprising Scissor Steps for RV Towables and Trailers with 26" Mounting Space - 5 Stairs w/ Landing Gear
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.