1. RV and Camper Steps
  2. Stromberg Carlson
  3. 4 Steps
  4. Pull-Out Step
  5. Towable Camper
  6. 24 Inch Wide Step
Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs

Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs

Item # SMFP-4400
lowest price pledge
Retail:$487.49
Our Price: $400.12
You Save: $87.37
RV and Camper Steps
This item qualifies for Free Shipping
Shipping Weight: 85 lbs
Quantity: 
In Stock
RV and Camper Steps SMFP-4400 - 4 Steps - Stromberg Carlson
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant. Lowest Prices for the best rv and camper steps from Stromberg Carlson. Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs part number SMFP-4400 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (428)
  • Q & A (32)
  • Photos
  • Why etrailer?

Stromberg Carlson RV and Camper Steps - SMFP-4400

  • 4 Steps
  • Pull-Out Step
  • Stromberg Carlson
  • Towable Camper
  • 24 Inch Wide Step
  • 8 Inch Drop/Rise
  • 28-1/8 Inch Wide
  • Steel
  • No Ground Contact

These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.


Features:

  • Manually operated RV steps make it easy to get into and out of your motor home
    • Simply pull steps out for use and position back in place for travel
  • Non-slip surface with oval tread holes provides sure footing
    • 1-1/2" Wide strip of grip tape on edge of steps offers additional traction
  • Rust-resistant black powder coated steel is strong and durable
  • Easy bolt-on or weld-on installation
    • Mounts to RV frame in same manner as original steps
    • Mounting hardware not included
    • May require outriggers (sold separately) for installation
  • Made in the USA


Specs:

  • Entry height: 28"
  • Step dimensions: 24" wide x 9" deep
  • Mounting bracket dimensions: 28-1/8" wide x 18-1/2" tall x 12" deep
  • Drop/Rise: 8"
  • Weight capacity: 300 lbs
  • 1-Year warranty


Easy Operation

These manual steps lessen the distance between your RV and the ground. The pull-out design lets you easily slide the steps out of their base for use and back in for storage during travel. The steps lock into place in the stored position.


Sturdy, Non-Slip Construction

These steps are designed with oval tread holes and 1-1/2" wide strips of grip tape to provide an anti-slip surface.


The strong steel steps can hold 300 lbs, and they are powder coated for rust resistance.


Simple Installation

Pre-drilled holes on the top of the mounting base match up to factory holes on the bottom of your RV. Just install the base with 2 carriage bolts and nuts (not included) on each side, and you're ready to use your steps. These steps can also be welded onto your RV's frame. Outriggers (sold separately) may be necessary for installation depending on the model of your original stairs.



SMFP-4400 Stromberg Carlson Flexco Manual RV Steps - Four - Black - Folding - 24 Inch






Customer Reviews

Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs - SMFP-4400

Average Customer Rating:  4.8 out of 5 stars   (427 Customer Reviews)

These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.

- SMFP-4400
by:

Looks like a great product, if you ignore the box it came in. I received the steps in a badly beaten box with many holes. The holes were where the edges of the steps broke the box sides. Cardboard not thick enough to prevent this problem. Good thing no mounting hardware was included, as it would have been lost in transit. I was warned by a friend of mine that received their steps the same way. I haven't mounted steps yet, but looks like they will mount very easy. I'm replacing a 3 step with this 4 step, because the bottom step on the 3 step is 12" off the ground. 828270



- SMFP-4400
by:

Great service from your staff. Haven't unpacked the steps yet and plan to imnstall them tomorrow. 596859


Comments
Great. Better having less rise in each step.
Donald - 01/12/2020

64238

- SMFP-4400
by:

Outstanding service. Actually was able to talk to a human, not a machine. How unique is that. Great service and fast shipping. 555771



- SMFP-4400
by:

We were able to remove and install the new ones in an hour..we couldn't be happier having the extra step. With an elderly dog it makes things easier for him. Adding the carpet wraps were a bonus. 549512



- SMFP-4400
by:

Product was a name brand exact fit as represented. Stronger than original. Totally satisfied with the purchase. 468821



- SMFP-4400
by:

Great step has made it easier to get in the trailer. I don't understand why they don't put four step on trailers when new. Arrived on time easy to install in 30 minutes with help of a floor jack. 438218



- SMFP-4400
by:

Very pleased with stairs Was a perfect fit for the ones I destroyed Price was great and shipping was free Had them in 5 days Will use etailer again 430537


Comments
very well fit was good
david b - 09/10/2018

43434

- SMFP-4400
by:

Details on web site not as clear about measurements.but with LIsa help got what I needed to know. Steps fit like they should. Thanks 422768



- SMFP-4400
by:

I needed replacement rv steps. Product was easy to order and was delivered promptly. Good value. 397530



- SMFP-4400
by:

Got it today as promised. Installed it in about an hour. Works great. My wife is disabled and was haveing a hard time with the 9" rise on the steps. She gets up and down much better with these. 394648



- SMFP-4400
by:

I had my new 4 step for just over a year now. They still work and look great. What a difference they have made on getting into and out of the camper. The step from a 3 step to a four step is much better on the old legs . I wish I had gotten these sooner. Just a small amount of rust showing in a few spots but some spray paint will take care of that soon. Will buy again if and when these need replacing. 368352



- SMFP-4400
by:

I received the ordered stairs and they arrived a few days later. Due to weather, I haven't gotten them installed as yet but my wife (a Shortie) is looking forward the the 4 entrance steps instead of the original 3 steps. (A couple of years ago I 'reversed the axles on the trailer which increase the entrance step height about 5" from the ground.) Hopefully she will be a 'Happy Camper' now that she can enter the trailer easier via the new 4 step installation. Thanks Etrailer for another great product! I may have rated the steps to 5 stairs if I already had the steps installed? 360579



- SMFP-4400
by:

I bought these steps a year ago,they work very well,an bolted right up to existing bolt holes!! They fold in an out very easily,my wife has no problem folding them in an out. I would recommend them if you need the additional step. 340272



- SMFP-4400
by:

The four step stairs are great. Minor cutting with a saws all to clear the top stair slide out. The fitment was perfect and the quality of the product is great. Would recommend these steps to others 324698



- SMFP-4400
by:

They've continued to work flawlessly on our campground's hayrack. 288916



- SMFP-4400
by:

We have ordered from etrailer previously and always had great results. Same this time. Product was exactly as presented, shipping quick, and price was great! 252984



- SMFP-4400
by:

Removal old of three steps and installing new steps was no problem wonderful having the four steps to use 249760



- SMFP-4400
by:

Ordered these steps and 3 days later delivered to my front door. About 3/16" wider than the original Flexco triple steps I replaced on my Cedar Creek fifthwheel, but still fit. I did have to trim about 1.25" off the bottom of the existing mounting brackets under the entry door that these steps bolt on to, but not a big issue. Good sturdy steps. 227504



- SMFP-4400
by:

Great product.Installation was simple.Madison H and etrailer were great to work with. 224435



- SMFP-4400
by:

I received the steps faster than I thought it would be here. It looks good and just what I ordered. I have not been able to install it yet because of an injury in the family. 212036



- SMFP-4400
by:

The step was delivered as expected in great shape. looks great. The square hole the old step was in, is not square and this one takes up all of the room. trying to fix that. Thank you. A job well done. 204039



- SMFP-4400
by:

Always great products at etrailer. I don't even look elsewhere any more. 196455



- SMFP-4400
by:

Installation required some modification for replacing a three step version. The steps themselves required some modification to make them level. A few of the welds were not very good quality. 185531



- SMFP-4400
by:

Steps arrived very quickly, easy to install and very good quality 184837



- SMFP-4400
by:

No hassle ordering and products came fast. Just finished putting my new flexco quad steps in. Excilent products. Best pricing i could find and with free shipping it's a no brainer. 182938


25
459
Show More Reviews

Ask the Experts about this Stromberg Carlson RV and Camper Steps

  • Dimensions of the Flexco Steps Part # SMFP-4400
    That is hard to say, but what you can do is check out the dimensional picture I attached for the Flexco Steps part # SMFP-4400 and compare them to what you have to see how they would compare to what you currently have.
    view full answer...
  • Dimensions of Flexco Manual Pull-Out Steps for RVs # SMFP-4400
    The bolt to bolt distance on the Flexco Manual Pull-Out Steps for RVs, # SMFP-4400, measures 28-1/8 inches and the sliding bolt at it's highest point is approximately 3-1/2 inches below the mounting base. I have attached a dimensional diagram for you.
    view full answer...
  • Replacement 3-Step Manual RV Steps with 4-Step Manual RV Steps
    Manual RV steps # SMFP-4400 could work for you. This is a 4-step unit that is 27 inches wide overall and 12 inches deep (front to back) and 18-1/2 inches tall. None of the other 4-step options are as close in the measurements of what you have now. the 4-step model will hang down at least 4 inches more than the 3-step model when the steps are extended.
    view full answer...
  • Replacement Steps For 2013 Cedar Creek 5th Wheel Trailer Upgrade To 4 Steps
    Yes, you can use the Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs # SMFP-4400 for your replacement steps on your 2013 Cedar Creek 5th Wheel 36CKTS. I have attached pictures of the dimensions of these steps for you to determine if this will be a good fit for your needs. This will give you a little over a 27-1/2 inch drop from your frame when fully extended. For a slightly longer drop, you may be interested in the Alumi-tread # LC432698. This 4 step...
    view full answer...
  • Recommended 4 Step Assembly For Cedar Creek 36CKTS 5th Wheel Trailer
    For your Cedar Creek 36ckts 5th wheel trailer, I recommend the Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs # SMFP-4400. I have attached pictures of the dimensions of these steps for you to determine if this will be a good fit for your needs. This will give you a little over a 27-1/2 inch drop from your frame when fully extended. You will want to make sure you have enough ground clearance to add that additional step.
    view full answer...
  • Replacement Quad Steps Compatible With 2007 Sunnybrook Titan 30fksTrailer
    The Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs # SMFP-4400 are a factory replacement for any steps that have a base around 28-1/8" wide x 9-3/4" deep and a bolt pattern. The bolt pattern is 25-3/8 wide and either 7 inches or 5-1/2 inches deep. You will need to take some measurements to confirm a fit with your 2007 Sunnybrook Titan trailer. If the bolt pattern isn't a fit but the base is, you can use the Outriggers for RV Manual Pull-Out Steps # LC301704.
    view full answer...
  • RV Quad Step Recommendation for Less than 9 inches between Steps
    We have the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 which have an 8 inch rise between the steps. I've posted a picture to assist. Your other option is similar in measurement and is # SMFP-4400. We don't currently carry a quad step that has 7 inch rise, so these will be the best I can offer at this time for what you are seeking.
    view full answer...
  • Step Recommendation for RV with Threshold 32 inches Off Ground
    A quad step like the FlexCo steps part # SMFP-4400 would work great. They have 8 inches between the steps and the bottom step would end up around 5 inches from the ground. With that you could then use the hand rail part # AP-101 which will make life easier!
    view full answer...
  • Availability of 4-Step Set of Stairs for a 5th Wheel Trailer
    The only 4-step aluminum steps we carry are scissor steps such as # AS24 but they are not designed for permanent installation on a 5th wheel trailer. For steps that are designed for permanent installation on a 5th wheel trailer you can use Stromberg-Carlson model # SMFP-4400.
    view full answer...
  • Replacing 3 Step with 4 Step Assembly on 2013 Palomino Puma 5th Wheel Trailer
    We do have a large selection of 4-Step RV assemblies available. In order to choose a replacement unit that will fit into the same space designed for your existing 3-Step assembly, you will just want to take a few measurements. You will first want to measure the width of your current assembly. This will be the width of the step housing that is mounted to your trailer. I also recommend measuring the step height of the unit along with how far the steps hang down when extended. The...
    view full answer...
  • Recommended 4-Step RV Steps To Replace 3-Step On 289RK Denali Travel Trailer
    If the mounting location for your RV steps is 27 inches wide we have steps that will work for you. I recommend the Stromberg Carlson RV Stairs, part # SMFP-4400. These steps measure 27-inches wide overall, and 12-inches deep (front to back) and 18-1/2 inches tall. The steps themselves measure 24 inches wide and have an 8-inch rise/drop with a weight capacity of 300-lbs. This is designed for a permanent installation. One concern when going to more steps is the ground clearance. I have...
    view full answer...
  • How To Measure For New RV Steps To Upgrade From 3 Steps to 4 Steps
    When measuring for a standard aluminum (or any material) set of RV steps you want to measure from center of bolt hole on one bracket to bolt hole on the other bracket of your existing steps. You can also measure the width of the doorway of the RV (where the steps install) if you are not able to measure the existing steps. We do offer RV steps with 4 steps but you would have to make sure you have the ground clearance for an extra step. You want to measure from the bottom of the doorway...
    view full answer...
  • 4-Step Pull Out Recommendation for 2010 Cougar 5th Wheel by Keystone
    Your 2010 Cougar by Keystone has a Lippert frame so that means that our RV pull out steps like the Flexco Pullout 4-Step part # SMFP-4400 are going to bolt right up since these steps are designed to attach to the Lippert mounting brackets. These are overall 28-1/2 inches wide so you can also compare that to the mounting brackets of your trailer to see if they are a match.
    view full answer...
  • Can Single Step of Winnebago Access Chalet Be Replaced by Double Step
    A double step can replace a single step but typically the widths are different. Worse case scenario you can move the brackets or install new outrigger brackets but it's very doable. Do you know what the width of your current steps is? A very common double step is the part # LC432682 which is 25-1/4 inches wide which is a very common width. For outriggers then you'd want the part # LC301704 if your current brackets aren't the correct dimension
    view full answer...
  • Recommended Replacement RV Steps For 2013 Montana Fifth Wheel Trailer
    You are correct. the RV steps we offer are 24-inches wide regardless of the amount of steps. I recommend installing replacement steps like part # SMFP-4400. These are 24 inch wide steps. The mounting base dimensions are 27 inches wide x 9-inches deep. You would need to build up the mounting location on your RV to work with these steps.
    view full answer...
  • Hickory Springs Quad Step with 8 Drop/Rise for 5th Wheel Trailer
    The discontinued Hickory Springs Manual Pull-Out Steps 94240EXTALC1 are labeled as having a 7" drop/rise but when you take the actual measurements you can see that the first steps have about 8" between them and then the last steps has about 7-5/8" between them. One that is a bit closer to what you are looking for is the Flexo part # SMFP-4400 which has as 8" drop between each of the steps so it fits your application perfectly.
    view full answer...
  • Is There a Weight Capacity for the Manual Pull-Out Steps For RVs, part # SMFP-4400
    I called my contact at Lippert about the Manual Pull-Out Steps For RVs, part # SMFP-4400 they said the capacity is 300 lbs.
    view full answer...
  • Replacement Stromberg Part # SMFP-4400 With 4 Steps
    The Flexco Manual Pull-Out Steps, part # SMFP-4400, is the replacement that you are looking for. Flexco is a product line of Stromberg Carlson which is why it comes up as Flexco when you were searching. If you want to double check to make sure that these stairs are the exact replacement, you can refer to the attached picture to compare the mounting holes for these steps to what you have right now on your 2015 Cougar Keystone.
    view full answer...
  • Will Flexco Manual Pull-Out Steps for RVs # SMFP-4400 Fit 2005 2005 Crossroads Cruiser
    The Flexco Manual Pull-Out Steps for RVs # SMFP-4400 that you referenced will fit your 2005 Crossroads Cruiser but at worst might require moving the current brackets, or going a different route all together. You could weld these directly to your trailer frame, or use outriggers # LC301704 to act as new brackets. The mounting bracket dimensions of this are 28-1/8" wide x 18-1/2" tall x 12" deep.
    view full answer...
  • Availability of RV 4 Step that is 24 inches Wide
    Hickory Springs does offer a 4 step model of their RV pull out steps with the part # SMFP-4400. These have the same dimensions as the triple step as well as same step design so it's exactly what you are wanting.
    view full answer...
  • Quad Step Recommendation for a 2009 Heartland Big Horn
    The quad steps we offer like the part # SMFP-4400 have a mounting bracket outside dimension of 27 inches like what you see in the picture I attached. What you can use to allow you to install these on your trailer frame is the Outriggers part # LC301704. You may need to do a small amount of modifying, but with these brackets you will be able to install the steps on your RV.
    view full answer...
  • Will Flexco Manual Pull-Out Steps Fit in Place of Hickory Springs Steps
    Going from a 3 step to a 4 step is going to reduce the ground clearance and that could end up being an issue depending on the terrain. The difference is width would seem to be off just enough to where you would not be able to mount the new steps in exactly the same holes as the old steps. Not that drilling new holes is all that difficult but if the more narrow span does not line up with structural metal to handle the weight then it isn't going to work. If you think you might need an...
    view full answer...
  • Could Flexco Steps part # SMFP-4400 Fit 2017 Keystone Avalanche
    The Flexco steps part # SMFP-4400 that you referenced are very universal and can basically be made to fit any RV, but are also made with dimensions that match what's needed for most RVs like your 2017 Keystone Avalanche. The outside dimensions of the mounting base of this measures 28-1/8 inches so you might compare that to what you have to see. You should be able to move your outriggers, but if not we have replacements as part # LC301704.
    view full answer...
  • Recommendation for 4-Step Setup to Fit 2008 Grand Junction
    What you would need to do is move the current outriggers of your trailer out so that the # SMFP-4400 you referenced can fit. Otherwise we have replacements as part # LC301704.
    view full answer...

Do you have a question about this RV and Camper Step?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Shelly K
Updated by:
Halie H
Written by:
Samantha S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.