Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs

Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs

Item # SMFP-2100

lowest price pledge

Retail:$163.02

Our Price: $126.45

You Save: $36.57
RV and Camper Steps

This item qualifies for Free Shipping

Shipping Weight: 36 lbs

Quantity: 
In Stock
RV and Camper Steps SMFP-2100 - 350 lbs - Stromberg Carlson
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant. Lowest Prices for the best rv and camper steps from Stromberg Carlson. Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs part number SMFP-2100 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (403)
  • Q & A (33)
  • Videos (1)
  • Photos
  • Why etrailer?

Stromberg Carlson RV and Camper Steps - SMFP-2100

  • 2 Steps
  • Pull-Out Step
  • Stromberg Carlson
  • Motorhome
  • Towable Camper
  • 24 Inch Wide
  • 8 Inch Drop/Rise
  • Steel
  • No Ground Contact
  • 350 lbs

These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.


Features:

  • Manually operated RV steps make it easy to get into and out of your motor home
    • Simply pull steps out for use and position back in place for travel
  • Non-slip surface with oval tread holes provides sure footing
    • 1-1/2" Wide strip of grip tape on edge of steps offers additional traction
  • Rust-resistant black powder coated steel is strong and durable
  • Easy bolt-on or weld-on installation
    • Mounts to RV frame in same manner as original steps
    • Mounting hardware not included
    • May require outriggers (sold separately) for installation
  • Made in the USA


Specs:

  • Entry height: 13"
  • Step dimensions: 24" wide x 9" deep
  • Mounting bracket dimensions: 27-5/8" wide x 9-7/16" tall x 12" deep
  • Drop/Rise: 8"
  • Weight capacity: 300 lbs
  • 1-Year warranty


STCL 2100 Dims

STCL 2100 Dims 2

STCL 2100 Dims 3

Easy Operation

These manual steps lessen the distance between your RV and the ground. The pull-out design lets you easily slide the steps out of their base for use and back in for storage during travel. The steps lock into place in the stored position.


Sturdy, Non-Slip Construction

These steps are designed with oval tread holes and 1-1/2" wide strips of grip tape to provide an anti-slip surface.


The strong steel steps can hold 350 lbs, and they are powder coated for rust resistance.


Simple Installation

Pre-drilled holes on the top of the mounting base match up to factory holes on the bottom of your RV. Just install the base with 2 carriage bolts and nuts (not included) on each side, and you're ready to use your steps. These steps can also be welded onto your RV's frame. Outriggers (sold separately) may be necessary for installation depending on the model of your original stairs.



SMFP-2100 Stromberg Carlson Flexco Manual RV Steps - Two - Black - Folding - 24 Inch

Similar to Hickory Springs 98224EXTALC1







Video of Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Stromberg Carlson RV and Camper Steps - Motorhome - SMFP-2100 Review

Today we're going to be taking a look at the Flexco manual pull out steps for RV's. This is a manually operated RV step that's going to make it easier to get into and out of their motor home. All you have to do is pull the step out for use and then they easily position back into a stowed or travel position for traveling. Here on the step surfacing, we're going to have nonslip surfaces. We're going to have oval tread holes that are going to provide sure footing. That's going to be located on each step. Now those tread holes also allow for dirt and moisture to fall through the step, that way it doesn't collect on the step surface.

At the front of each step we're going to have a piece of grip tape on the edge. It's going to measure about an inch and a half wide and that's going to offer additional traction. These steps are made from a steel construction so they're very strong and durable. They actually feature a weight capacity of 350 pounds. It's also going to feature a durable black powder coat finish, which is going to do a great job at resisting rust and corrosion. This is an easy bolt on or weld on installation.

It's going to mount to the RV frame in the same manner as your original steps. Mounting hardware's not included. You're going to have 2 mount holes located on the upper portion of each arm. These are going to have a diameter measurement of 3/8ths of an inch. Now the unit may require outriggers for installation depending on the model of your original stairs.

Outriggers are sold separately and they are available here at etrailer.com if you need them. The product's made right here in the USA. A few measurements I want to go over with you real quick starting with the base dimensions. We're going to take a measurement from outer edge to outer edge. That's going to give us a measurement of about 26 and 1/8th of an inch wide. The depth of just that arm, that's going to measure about 8 inches deep.

Then when it comes to the bolt hole pattern, what we're doing is, we're just taking a measurement from the center of one hole to the center of the other. Right here on top, those are going to give us a separation measurement on center of about 24 and a half inches, and then going front to back, those are going to be separated on center by about 7 inches. Then when it comes to the dimensions of the actual step, go in this direction. Now each step is going to be the same. Overall width is going to be about 24 inches wide, and then the overall depth right here at the center's going to be about 9 inches deep. When it comes to the drop or rise of the unit, what we're doing is we're measuring from the top of one step to the top of the other. That separation's going to be about 7 and 7/8ths of an inch. We're going to have about 4 and 11/16ths of an inch from the top of the mounting surface to the top of the upper step platform, and about 12 and 3/8ths from the top of the mounting surface to the top of the lowest step. Measuring to the bottom of the lowest step, that's going to give us an overall drop measurement with it fully extended out, so that's going to be the lowest that it's going to hang down in a usable position of about 13 and 5/8ths of an inch. Now with the unit in a stowed position, to get it into a stowed position all you have to do is lift up on the bottom step here. It's going to fold on top of this step, and then there's going to be these rubber pads. That way it's going to prevent metal to metal contact. Very nice, seamless operation. Then you can go around here in the middle, we'll get it started, and then it has a tracking system here on the side where the unit goes in. Once you get it to this point, you just push it down a little bit, and it's going to move it into the fully locked position for travel, but this is the stowed position. We're going to take some measurements here of the side bracket. Measuring the overall width of that piece, it's going to be about 12 inches wide, about 9 and 7/16ths of an inch tall. Now you notice that right here's actually going to be our lowest point. With it in a retracted, or stowed position, from the top of the mounting surface to the bottom of that piece right there, that's going to give us a hang down measurement of about 10 inches. Again, this step's going to feature a weight capacity of 350 pounds. When you're ready to use it, all you have to do is pull out here in the center, grab the folding step, unfold it, and that's all there is to it. That's going to do it for today's look at the Flexco manual pullout steps for RV's.


Customer Reviews

Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs - SMFP-2100

Average Customer Rating:  4.8 out of 5 stars   (403 Customer Reviews)

These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.

- SMFP-2100
by:

REALLY need some suggested mounting methods suited to particular trailers. How would you like to buy a couple of airplane wings with no suggestion as to what they would fit and how to mount them? 517744


Comments

This particular step has a 27-5/8 inch wide mounting bracket. The best way to determine the correct steps for your application is to measure the width of the mounting bracket of your existing steps, and compare that dimension to the available steps.

-- Mike L - 06/06/2018

39332

- SMFP-2100
by:

Got the step in just a few days. Took about fifteen minuets to put on. Had just single step but it 12 inches from the door. This double step is 9 inches. Might not seem like much but when you have bad knees the inches may as well be feet. Can still go up about two more inches but have to modify the bracket that is welded to the camper frame. But we love the double step. Trying it out this weekend. Thank you for having a web sight. Sure makes my life better. I know where to go for thing like this double step. I highly recommend etrailor. Great company. 301505



- SMFP-2100
by:

Easy to install. Had to slot my mount about a 1/4 inch, but whole install took less than a half hour. 228556



- SMFP-2100
by:

The folded unit sticks a little when lifting into the stored position. Other than that, function, rigidity and quality are all fine. It replaced a single step unit that was uncomfortable to use. Good product that I would not hesitate to recommend. Made an USA: what a concept! 561138



- SMFP-2100
by:

Very pleased with your service and product. Very happy I picked your Web site! Thanks again for your help. Would recommend you anytime. Thanks again! 681120



- SMFP-2100
by:

great step-worth every penny. I bought this to replace my worn out oem step. Perfect fit. This is important for those of us thay dont own a machine shop or a brother who is a mechanic. I would buy this again, but i doubt i will ever need too. 638591



- SMFP-2100
by:

Used these on my deer stand. Worked perfect. Great quality easy to weld on 580642



- SMFP-2100
by:

My camper came with one step. We tried several step stools and after falling several times I found this item and the price was low. I had to do a little cutting of corners to mount, but it worked like a champ. It only took me about 2 hours and it took the place of the single step. We love it. It looks like it was factory installed. 575162


Comments

The steps are still working great. I am sure they will hold up for the life of the camper.

Samuel L - 10/18/2019

62910

- SMFP-2100
by:

Great product, my previous two step was twice as long and I dragged the ground with it on the maiden voyage home. The flexco two step is well built, made in the USA, is half as tall when folded with the right stepping distance when extended and half the weight. I use my RV at least one weekend a month and the new step makes it much more enjoyable. 545703



- SMFP-2100
by:

Received steps right on schedule and the fit with just minor adjustments, such as elongating two mounting holes. We believe they’ll work great as the single step was physically hard for my wife to get in and out of trailer. Only one problem is they didn’t retract easily at first until I readjusted the step arms. We’re pleased as these steps saved us money, time, and inconvience of having an RV shop order them and install that is always pricey! 544431



- SMFP-2100
by:

It installed easily with two people and clamps. It was what I wanted to get into food truck easier. 542079



- SMFP-2100
by:

Step works great. I have had no problems at all with the step and even after one year the step is rust free 541934



- SMFP-2100
by:

This is the 2nd one of these steps I have purchased and they work great. I have a bandwagon I use for playing in Mardi Gras parades and have one of these mounted on the front and back of the bandwagon. They are durable and have no problem supporting the weight of the musicians getting on and off the bandwagon. 516227



- SMFP-2100
by:

Delivered early and in good condition. 508785



- SMFP-2100
by:

The steps were to arrive by 8 pm on Monday, were surprised when UPS delivered them on Saturday afternoon! The installation wasn't as easy as we hoped, had to notch the back and drill out the back hole on both sides. No install instructions, but we got it installed. I think the double step will make our knees happy. Service was great. 494871


Comments

I recommend this 2-step, with its higher weight limit, it handles weight very good. Its great for our old knees. Our R-POD has the lift kit, and was a bit of a struggle to get up and down the steps with arms full. Now its a breeze. As someone mentioned, it sticks occasionally, but Ive found if I reach above the steps and pull from behind, it comes out with ease.

Sandy - 04/10/2019

52734

- SMFP-2100
by:

I had to modify the mounting brackets on our trailer and remove the top crossbar on the step to gain 1/4" but it worked out great! Much nicer than the single original step! 480897



- SMFP-2100
by:

just like the org. 466701



- SMFP-2100
by:

Excellent product! Not sure its going to work out. The top step is the appropriate distance from the floor of the trailer. However the bottom step rests on the ground. 431427



- SMFP-2100
by:

Almost perfect. Quality product. Pretty easy install. I would recommend the product. 425942



- SMFP-2100
by:

Great assy, very solid with no flex, unlike our original 420343



- SMFP-2100
by:

I'm impressed with the quality of the product. We purchased the 2-step model to replace a single step. Two years ago we raised our camper about 6 inches because it was so low it hit on all parking lot entrances. Moved the springs on top of the axels?. This will be a great upgrade along with a Lend a Hand grab bar. 391527



- SMFP-2100
by:

Installation was simple: clamped in place, drilled holes and bolted to frame. Steps dragged in the channels making them hard to deploy. It took some serious filing to get the clearance necessary for smooth operation. Very safe and sturdy. 385946



- SMFP-2100
by:

Bought these steps to replace single step on my Rpod 177. We have the lift kit on the axle, so the single step was difficult to get up and down on. This unit slid between the welded bracket with some persuasion. I had to enlarge the rear bolt holes on the bracket. Very pleased with the layout of the steps now! 382611



- SMFP-2100
by:

With a little retrofitting, this worked perfectly. My wife can now get in and out of our camper with ease. Thanks so much for all your help on choosing the best product for our needs. 377485


Comments

It was perfect for what we needed. A little modification on the hook up to the camper itself but I knew that going in. Makes getting in and out so much simpler with that extra step. I thank you and my wife said to tell you it was a knee saver.

Gil J - 05/07/2018

38258

- SMFP-2100
by:

Easy to install and a well built replacement for an unbeatable price. They don't hinge the same way as my old ones, but look so much better! Notice in the pictures that the hinge bar extends past the step frame on both sides. On my trailer, these fit within the existing plate mounts. I was not able to use the old bolts from the steps I removed, instead I installed slightly longer ones to complete the installation. Very happy with how these turned out on my trailer. 371569



- SMFP-2100
by:

Great product. Highly recommend it. 366193



- SMFP-2100
by:

Love having double steps! 351580



- SMFP-2100
by:

Well built and strong. It is light so as not to add extra weight , but makes getting in the Camper a whole lot easier on over 50 knees. 351149


Comments

Still working perfectly , Great upgrade, well worth the price.

Dane S - 03/11/2018

35698

- SMFP-2100
by:

Steps arrived on time and undamaged. Box in perfect condition. Installed on a 2017 (Green edition) Rpod that had risers installed. Was a tight fit, required some slight tapping to move into position but the tension actually held the steps in place so I could install the bolts. Front bolts perfect but rear holes had to be drilled out so bolts would fit. I knew this going in from other buyers so was not a surprise or a deal breaker. They are heavy duty and fold away in basically the same space as the original steps. Non-skid material is a nice touch. Would have been a "5" if holes lined up perfectly. But then not much in life is perfect. 349446



- SMFP-2100
by:

Good product exactly the way it was supposed to be, great company to deal with go etrailer 340107



- SMFP-2100
by:

Love it. Able to install with very minimal modification. 339908



- SMFP-2100
by:

I purchased the fold out two steps for my brothers camper. It is a good product and the amount of time it took to receive was amazing. Very good price , very reasonable. Very satisfied customer. 335545



- SMFP-2100
by:

thank you very much for a great product. received it and installed it yesterday. had to drill a couple of holes but not surprised, got an R-pod in August and only had one step and being a little older with a short legged wife we needed a little help and we got it from you. excellent product and service. again thanks Bill 329844



- SMFP-2100
by:

Great addition to our utility trailer. Easy installation. Great Quality, very sturdy 304589



- SMFP-2100
by:

Great quality arrive in great shape 300108



- SMFP-2100
by:

Great price great quality 294562



- SMFP-2100
by:

Received the trailer steps faster than I expected. They were easy to install and was happy to note that the steps were easier to pull out and put back in than 'the original ones. 292360



- SMFP-2100
by:

Great upgrade from a single step. Very solid construction. 288633


Comments

It appears theyll last forever.

Doug B - 08/28/2017

27686

- SMFP-2100
by:

The stairs are in, although a little challenging to mount them, they fit perfectly and are just what we were looking for. 286618


Comments

Steps are working out great and were a good fit for our camper!!

Kevin - 08/24/2017

27555

- SMFP-2100
by:

Very nice well built set of steps. Great service from etrailer , steps sent 3day select on the 99.00 free shipping . Great. 281081


Comments

The steps are great. Work perfect

Fieldmech - 08/07/2017

26925

- SMFP-2100
by:

Great product! Solved the problem of to large of a rise on the single step that came with our travel trailer. We did have to drill out the holes for the bolts to make them a little larger which took a while. But it was worth the trouble. 266705



- SMFP-2100
by:

Easy install Replaced a single step Works great Very sturdy, even under 250+ 262990



- SMFP-2100
by:

Thanks, steps fit good and are the right size for my trailer. 261624



- SMFP-2100
by:

Purchased for my 2016 Rpod 179...looking forward to installing and using them 237453



- SMFP-2100
by:

I ordered 2 products from etrailer. The Flexco double step and the Brophy stabilizer clamp. Shipping was fast and the products are just as advertised. Our camp trailer came with a single step and it was just too high to be comfortable entering and exiting the trailer. Some friends told us about etrailer so I decided to give the website a look. I found exactly what I was looking for and the price was the lowest I found anywhere. I installed the step today and it really made a difference. The brophy stabilizer clamp did just what I needed it to do. I did have to mount it in the opposite direction because of the way my hitch is attached but the included instructions covered this as being a possibility. Great prices, fast shipping and products as advertised. It doesn't get any better than that! I will order from etrailer again! 233699



- SMFP-2100
by:

Perfect replacement for a damaged or single step. Mounts right in place of there the original one was bolted. 232050



- SMFP-2100
by:

I replaced the OEM single step on my Forest River Evo trailer with this double step. The OEM step was mounted by the sides, to plates that stick down about 8" from the bottom of the trailer, and are welded to the frame of the trailer. This double step has sliding pins that stick out of the sides about 1" and prevent the step from fitting between the trailers mounting plates. I had to cut away a 3" by 10" piece from the bottom of each of the plates to allow the step to be mounted. It looks and works great once mounted, but you should not purchase this step to mount to side mounting plates unless you have the capability to modify the plates. 227671



- SMFP-2100
by:

no problems 226881



- SMFP-2100
by:

These steps are great. Very solid and spaced just right. A vast improvement over the OEM single step. Highly recommend. This is my third order from etrailer and I couldn't be more satisfied with the quality of their offered products, their rapid response and shipment, and their customer followup and service. When the need arises, I will buy from them again. 224221


Comments

Alls well

Robert - 09/04/2016

20804

- SMFP-2100
by:

Was not hard to install, had it installed with in 5 min. 223953


50
432
Show More Reviews

Ask the Experts about this Stromberg Carlson RV and Camper Steps

Do you have a question about this RV and Camper Step?


  • Replacement 2-Step Manual RV Step for 2017 Forest River Salem Cruise Lite
  • It is usually a straightforward process to replace an existing RV step unit with a new one, perhaps one with more steps or one with a different height between the steps, or even an electric one. We have 2-step units in manual and electric models and all are shown on the linked page. Unfortunately RV makers do not maintain specs on items such as step assemblies. What you want to do is measure your existing step's overall width and the center-to-center spacing of its mounting holes. Click...
    view full answer...

  • Key Dimensions for Selecting Replacement Triple Step Unit for Jayco Travel Trailer
  • Your photo did not make it through to us but we can still help you select replacement steps for your Jayco Jay Flight 28BHStravel trailer. The RV steps we offer for towable trailers come in several overall widths. You can see all sizes and models on the page I linked for you. You will want to match the overall mounting pattern of the new step to your existing unit. You will also want to ensure the new step unit does not reduce your ground clearance; keep the existing step's retracted...
    view full answer...

  • Replacement 2-Step Entry Step Assembly for 2017 Cruise Lite Trailer
  • Trailer makers typically do not maintain details about items like the steps that they install on their RVs so for you to select a 2-step assembly to replace a single-step unit you'll just need to note some basic dimensions. First, you want to check the size and spacing of the mounting holes on the frame that are used to secure the current steps. Our 2-step assemblies come in 20-inch and 24-inch widths, both shown on the linked page, and the distance between the two steps is also variable....
    view full answer...

  • Recommended Storage Cover for Forest River R-Pod 177 Teardrop Trailer
  • Classic Accessories offers a storage cover made specifically for the Forest River R-Pod 177 teardrop trailers, which measure 18-feet, 8-inches in length from end to end as shown in the linked image. You can use part # CA80199. This cover comes with a storage bag and 3-year warranty and features triple-ply construction with moisture-wicking fabric and elasticized hem.
    view full answer...

  • Pull Out Step Recommendation for a R-Pod 177 Travel Trailer with Shorter Steps
  • The Flexco Manual Pull Out steps part # SMFP-2100 are a double step that have 7-7/8 inches between steps. This should be noticeably smaller between the steps of what you currently have.
    view full answer...

  • Flexco 2-Step Manual RV Pull-Out Steps for Forest River Travel Trailer
  • For a set of 2-step Flexco RV manual pull-out steps that are 24-inches wide you can use part # SMFP-2100. This step assembly offers a 350-lb weight capacity and 7-7/8-inches of rise/drop between steps. The 24-inch wide steps are 9-inches deep. Mounting holes are spaced apart 8-inches front-to-back and 26-1/8-inches left-to-right.
    view full answer...

  • Recommended Steps For 2008 Dodge Durango
  • Adding RV steps like the Lippert Components Kwikee 40 Series Double Electric Step with Double Tread # LC3726892 to a 2008 Dodge Durango would require custom welding of brackets as well as enough ground clearance. Although this looks ideal, I assume you'd be looking at a lot of custom fabrication for your vehicle that it isn't intended to handle and could effect other components. My recommendation is to use the Westin Molded, Lighted Running Boards w/ Custom Installation Kit - 6" Wide...
    view full answer...

  • Manual Step Replacement Recommendation for Kwikee 32 Step On RV
  • For a double step that will fit in replacement of your Kwikee 32 steps part # LC372261 you'd want the Hickory Springs Manual Pull-Out Steps # 98224EXTALC1 as this is only model we carry that's the correct width.
    view full answer...

  • How Do the Flexco Manual Pull-Out Steps SMFP-2100 Install
  • Step # SMFP-2100 is supposed to mount up to factory holes on the bottom of the frame or it can be welded to the frame. For nuts and bolts use # LC118155-72 if you don't already have some from the old steps. For welding the installation should be performed by a professional welder. In some cases outriggers # LC301704 are needed but that depends on the model of your original stairs. Based on the 26-3/4 inch measurement you would need the outriggers because the center to center mounting...
    view full answer...

  • Upgrading to 2 Steps on a 2017 Salem Cruise Lite 201BHS
  • We don't have a way of knowing exactly which steps are currently on your trailer however you can use any that you like and will fit. If you measure the mounting bracket of your current steps you can use that to find a replacement. For example, the Flexco Manual Pull-Out Steps # SMFP-2100 have a mounting bolt hole pattern of 24-1/2 inches wide by 7 inches deep. The steps themselves are 24 by 9 inches.
    view full answer...

  • Availability of Higher Capacity 24 Inch Pull Out RV Steps
  • There sure is! Take a look at the Stromberg Carlson Flexco Manual Pull-Out Steps, part # SMFP-2100. The 2 step unit is 26-1/8 inches wide and has a 350 lb weight rating. The steps are also manufactured in the USA.
    view full answer...

  • Overall Width of Hickory Springs Manual Pull-Out Step For RVs - Double
  • When we reviewed the Hickory Springs Manual Pull-Out Step, part # 952240RXWAC1, we found it to measure 25-1/4 inches. I have attached a photo showing this measurement, as well as the review video for the step. I also just went out to the warehouse and verified the measurement for you. The mounting bolt holes are 24 inches apart on top. The most similar step to the Hickory Springs is the Stromberg Carlson Felxco Manual Pull-Out Step # SMFP-2100. However, this step measures 26 inches...
    view full answer...

  • Could the Flexco Manual Pull-Out Steps # SMFP-2100 Install on a 1995 Award RV
  • The Flexco Manual Pull-Out Steps # SMFP-2100 could easily be installed on your RV. It may take some fabrication to get to fit depending on how your current step is set up. But either way this could be made to fit. With this step installed the bottom step would end up only about 5-1/2 inches from the ground so you would not need a handrail stair to use with this but in case you are looking for a hand rail to add to this step you would want the part # AP-101.
    view full answer...

  • 24 inch Wide Double Step Recommendation for Apex by Coachmen QB24
  • I looked up your Apex by Coachmen qb24 and it appears to have a double step setup below the door so for a 24 inch wide double step with 7-7/8 inches of drop between the steps our best option is the Flexco Manual Step part # SMFP-2100. It's hard finding steps with a shorter drop between stairs but this would be best option.
    view full answer...

  • Recommended Double Step Assembly to Replace Single Step Flexco on 2017 Forest River Trailer
  • To replace the single step Flexco step assembly on your Forest River Wolf Pup 16BHS Trailer, I recommend taking a look at the Flexco Manual Pull-Out Steps # SMFP-2100. This double step assembly features 9 inch deep, pull-out steps with a non-slip surface to provide sure footing. It has a mounting base that measures 26-1/8 inches wide and 8 inches deep (and a bolt hole pattern of 24-1/2 inches wide and 7 inches deep). I recommend comparing these dimensions to your current assembly to verify...
    view full answer...

  • Recommended Replacement RV Steps For 2016 Aliner Expedition
  • You want to make sure you select replacement RV steps that will fit the mounting location on your Aliner. I was unable to find the step specs for your camper so you will need to measure. The steps we offer have specific dimensions for the width and depth of the mounting locations. For example, The Lippert Steps, part # 952240RXWAC1 are 24 inches wide and 8-1/2 inches deep and require a mounting dimension of 25-1/4 inches wide and 9 inches deep. These steps have a 6-3/4 inch drop/rise...
    view full answer...

  • Would Flexco Step SMFP-2100 Fit 2017 Keystone Springdale 179QB
  • The Flexco manual pull out step part # SMFP-2100 will fit your 2017 Keystone Springdale 179QB and most likely would just bolt right to the frame, but worst case scenario you would have to move some mounting brackets around. If you needed outriggers to mount these steps you would want the part # SM-01. These steps are 26 inches wide overall. A lot of steps like this and the Stromberg are made to the same dimensions. The Stromberg you mentioned isn't carried by us anymore but it would...
    view full answer...

  • Will Manual Pull-Out Steps SMFP-2100 Fit a 2017 Forest River Wildwood XLITE 171RBXL
  • To determine if manual pull-out steps # SMFP-2100 fit your 2017 Forest River Wildwood you can measure the mounting hole spacing on your existing steps. If they are spaced 24-1/2 inch apart on center left to right and 7 inches on center front to back then these steps will fit. If you have a different measurement let me know what it is. Another thing to consider is ground clearance. Sometimes when you go to a unit with more steps it can cause ground clearance issues because the new steps...
    view full answer...

  • Replacement Manual Pull-Out Steps for a 2011 Four Winds Breeze Travel Trailer
  • Looking at the picture of your existing steps it appears they are attached on the sides rather than at the top of the steps. If that is the case then Lippert steps # LC432682 could work because the overall width of these steps is 25-1/4 inches. So they can bolt up in place of the ones you have. Step set # SMFP-2100 would be too wide for this.
    view full answer...

  • Dimensions Of Flexco Manual Pull-Out Steps For Travel Trailer Two Step
  • The 26-1/8 inches wide at the top is correct and the mounting holes at 24-1/4 x 7 inches are correct for the Flexco Manual Pull-Out Steps for RVs # SMFP-2100. The total width of 27-5/8 inches has to do with the end of the Rod that extends out both sides. I've attached pictures to assist with all the measurements.
    view full answer...

  • Can 2516G Rockwood Premiere have Single Step Replaced with Double Step
  • Single and double RV trailer steps often are different widths so you'd have to move the mounting hardware on your RV but you certainly could replace what you have with a double step like the part # SMFP-2100. The new steps could weld directly to the RV frame or you could install a new set of outriggers like part # LC301704.
    view full answer...

  • Can Flexco Manual Pull-Out Steps SMFP-1100 Replace Single Flexco Pull Out Step
  • Sounds like you currently have the part # SMFP-1100 which has the dimensions you mentioned. The double steps like the # SMFP-2100 have these dimensions: Step dimensions: 24" wide x 9" deep Mounting base dimensions: 26-1/8" wide x 8" deep Bolt hole pattern: 24-1/2" wide x 7" deep Drop/rise: 4-11/16" From top of mounting bracket to top of first step platform 7-7/8" from the top of the first step to stop of second step platform Threshold: 13-5/8" from the top of the mounting bracket...
    view full answer...

  • Does Using Outriggers to Mount RV Steps Raise or Lower the Steps
  • The outriggers # LC301704 would lower the steps but only by the thickness of the outriggers where they attach to the frame of the trailer assuming that any original mounting holes where in about the same position as those on the outriggers. Otherwise it would lower the steps by about 2 inches.
    view full answer...

  • Choosing Replacement Rv Steps
  • When choosing a replacement set of RV steps, the important measurements to consider are the dimensions of the step's housing that actually bolts to the RV. For instance, the # SMFP-2100 you referred to has a housing that measures 27-5/8 inches long by 9-7/16 inches tall by 12 inches deep, as shown in the provided photo. If the mounting location on your RV can accommodate the size of the housing, these steps would work great! The best way to determine fit is to measure the housing of...
    view full answer...

  • Double Pull Out Step Recommendation for Trailer with 350 lb Capacity and is 24 inches Wide
  • If you need a double step with a 350 lb capacity you would need to go with the Flexco Step part # SMFP-2100 which is 24 inches wide like you would need. I know this isn't your ideal solution since it requires modifying your mounting location that is on your trailer but I can't recommend you exceed the capacity of the # LC341500 which does have a 215 lb capacity.
    view full answer...

  • Mounting Hole Spacing for Different Manual RV Steps for a 1999 Jayco 5th Wheel Trailer
  • On Lippert steps # LC432682 the mounting holes on the top are spaced 7 inches apart on center front to back and approximately 24-1/2 inches apart left to right. The same goes for # SMFP-2100. Steps # SMFP-2120 are a little more narrow at a hole spacing of 20-1/2 inches but still the same 7 inch measurement front to back.
    view full answer...

  • Replacement Double Step Recommendation for Coleman 17 ft Camper
  • At one point the Flexco Steps part # SMFP-2100 that you referenced were listed as having the same width you need of 26-1/8 inches between the mounting brackets. We now know that the dimension is really 27-5/8 inches. Since we don't have a step that matches directly you'll either need to move your current brackets or have new ones installed with the Outriggers part # LC301704. The steps of this kit have an 8 inch rise whitch is pretty standard and would be a great option.
    view full answer...

  • Lippert SolidStep Fold Down Step for 2006 Forest River Surveyor SV 303
  • Since your doorway is 24 inches wide and the threshold is 31-1/2 inches from the ground the correct Lippert SolidStep is the part # LC698799 which is a triple step. A four step version of this would be too tall to fit properly so the triple step is the way to go.
    view full answer...


Do you have a question about this RV and Camper Step?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Shelly K
Updated by:
Sarah W
Updated by:
Hannah L
Updated by:
Halie H
Written by:
Samantha S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.