bing tracking image
  1. RV and Camper Steps
  2. Kwikee
  3. 1 Step
  4. Electric Step
  5. Motorhome
  6. 30 Inch Wide Step
Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 36 Series - 30" Wide

Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 36 Series - 30" Wide

Item # LC3756272
lowest price pledge
Retail:$1,105.95
Our Price: $760.61
You Save: $345.34
RV and Camper Steps
This item qualifies for Free Shipping
Shipping Weight: 49 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right for you? Product Expert Kathleen M says:

Yes, if you:

  • Busted your step, its motor, and control unit beyond repair, but the wiring is still intact
  • Have an entry height (distance from the ground to the mounting point) of 12-1/2" - 18-1/2" and a mounting place of least 29-7/8" x 11-3/8"

No, if you:

  • Have a broken switch kit or want to add one to your RV so you can override the automatic function of the steps
  • Are tired of dealing with potential electrical issues and want to switch to a manual step
Replaces the electric step, motor, and switch kit for your Kwikee 28 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power. Lowest Prices for the best rv and camper steps from Kwikee. Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 36 Series - 30" Wide part number LC3756272 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (26)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Kwikee RV and Camper Steps - LC3756272

  • 1 Step
  • Electric Step
  • Motorhome
  • 30 Inch Wide Step
  • Kwikee
  • 32-1/2 Inch Wide
  • Steel
  • 5 Inch Drop/Rise
  • No Ground Contact

Replaces the electric step, motor, and switch kit for your Kwikee 28 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.


Features:

  • Replaces the step, motor, and switch kit for your Kwikee 36 series steps
    • Control unit (LC379146) for automatic extension sold separately
  • Motor works with gearbox to extend and retract the step
  • Switch kit wires to the step and mounts inside your RV for manual operation
  • Integrated safety feature automatically retracts the step if it strikes an obstacle during extension
  • Non-slip tread and easy-to-see reflective strips on step surface
  • Sturdy, powder coated steel construction with weatherproof wiring withstands the elements
    • Solid steel drive rods and stainless steel bushings provide additional durability
    • Air pressed rivets at pivot points ensure long-term strength
  • Simple installation with existing mounting holes and wiring harness
    • Hardware sold separately
  • Made in the USA


Specs:

  • Extended height: 6-3/8"
    • Folded height: 5-3/4"
  • Overall width: 31-1/2"
  • Mounting plate dimensions: 29-7/8" wide x 11-3/8" deep
  • Bolt pattern: 26" wide x 8" deep
  • Step dimensions: 30" wide x 10-7/8" deep
  • Drop/Rise: 4-5/8"
  • Voltage: 12V
  • Control unit amperage: 10A
  • Control unit wire gauge:
    • Green: 12 AWG
    • Purple: 16 AWG
  • Weight capacity: 300 lbs
  • 1-Year warranty


Note: This step assembly includes the steps, motor, and switch kit only. The steps will operate manually through the switch kit.


If you want the complete step assembly that allows the steps to automatically extend and retract with the RV door, you will need a control unit. The switch kit included with this assembly will still work, but if you want to be able to override the automatic retraction, so the steps stay out whether the door is open or closed, you will need a different switch kit. The complete assembly with steps, motor, control unit, and switch kit is available under part number LC3756271.


The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should having this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.


Will Kwikee Electric Steps Work for You?

Electric steps are typically installed on RVs and some travel trailers. The electric steps from Kwikee install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.


Kwikee In and Out

The Kwikee electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 31-1/2" wide and 11-3/8" deep.


If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 24-3/4" wide to 37-1/4" wide. A full list of the available steps is below.


Outriggers for RV Steps

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.


Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.


How Many Steps Do You Need?

Kwikee Entry Height

To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.


The chart below displays mounting bracket widths in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.


This page's step assembly is in bold text.


Mounting Bracket WidthEntry HeightPart Number (Complete Assembly)Part Number (Replacement Assembly)
24-3/4"15-5/8" - 17-5/8"LC3747453LC3747452*, LC3747451**
25"16-3/4" - 18-3/4"LC3724742n/a
25-1/2"27-7/8" - 29-7/8"LC3658373LC369552*, LC365837*
25-1/2"20-1/8" - 22-1/8"LC372261LC3722615*, LC3722617**, LC3722616***
25-1/2"20-1/2" - 22-1/2"n/aLC3725791*
25-1/2"12-1/8" - 14-1/8"LC3723383LC372338**
25-1/4"13" - 15"LC3711363LC371136*, LC3711361**
25-3/4"22-7/8" - 24-7/8"n/aLC372558*
25-5/8"11-7/8" - 13-7/8"LC3691461LC369146*, LC3691462**
25-5/8"13" - 15"n/aLC3726041*
25-7/8"23-1/4" - 25-1/4"LC3726892LC3726891**
26-5/16"27-1/4" - 29-1/4"LC3694042n/a
29-3/8"18" - 20"LC3722661LC372266*, LC3722662**
30-1/4"15-1/4" - 17-1/4"n/aLC372779*
30-3/8"17-1/4" - 19-1/4"n/aLC427247*
30-5/8"20-1/2" - 22-1/2"n/aLC375632*
31-1/2"28-5/8" - 30-5/8"n/aLC375821*
31-1/2"12-3/8" - 14-3/8"LC3756271LC3756272**
32-3/8"20-1/4" - 22-1/4"LC3722862LC3722863**
37-1/4"18" - 20"n/aLC3694112*, LC369411***

*Motor and control unit

**Motor and switch kit

***Motor only



How Do You Install the Steps?

To install the steps:

  1. Hook up the steps to power to verify that all components are in working order
  2. Make sure the camper is level on flat ground
  3. Lift the steps into the mounting space and prop into place
  4. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  5. If needed, install the outriggers
  6. Align step mounting holes and secure in place with carriage bots and flange lock nuts

    -Make sure bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  7. Tighten hardware until snug
  8. Make sure assembly is sitting square and level
  9. Torque the hardware tight
  10. Connect the appropriate writing to your vehicle's source


3756272 Lippert Components (LCI) Quickie 36 Series Motorized Motorhome Entry Step - 1 Stair - 5" Drop/Rise - 30" Wide - 300 lbs

Kwikee Part Number 903600906





Video of Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 36 Series - 30" Wide

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Lippert Components Kwikee Single Electric Step Review

Speaker 1: Today you're going to be taking a look at the lifter components quickie 36 series single electric step. Stepping up into your RV can be a bit of a challenge. Especially if the steps aren't working. That's where our replacement steps are going to come into play. With our step installed, when we open the door it's going to automatically come out allowing us to step in easier getting in our RV but at the same time when we close the door, they're going to automatically retract making sure they're not going to catch on anything when we're driving down the road.Now from the top where it's mounted behind this panel, our step is going to drop down a total of five inches. In our application and the step we're using is going to be 24 inches wide by 10 and three quarter inches deep.

There is another step that is available that's going to be 30 inches. To see our website for your specific application and it's going to be made of a nice solid steel construction and have a nice black powdered finish for long lasting durability.The hidden amber light underneath our step is going to make it a lot easier for us to find that step in low light situations and have confidence when we're getting in or out of our RV. The included motor on our step is going to have a solid steel drive rod as well as stainless steel bushes for extended life of the motor. Our steps come with a door switch allowing it to know when to open up and when to close.Now our step is also going to come with a rocker switch in case you choose to manually turn it on and off and not use that door switch. Now that we've seen our steps and gone over some of the features, we do realize that every RV is going to be slightly different but we'll go ahead and give you a brief overview of how to get them in place.To begin our installation, you're going to need to remove your steps and disconnect al the electrical components that are on the steps themselves.

So I got our new step here and we're going to have our pigtail that we're going to wire into our motor home. Then the pigtail is coming off the step as well as the ground wire.So to get our step extended to make it a little easier to work with, I'm going to go ahead and plug in our pigtail and then I have a jump box here which is going to provide my power and grout. So I'm going to take the green wire with the ring terminal on it. I'm going to hook it to ground. I'm going to take my red wire, hook it to power, and then now we're going to take our jump box and turn it on and that should extend the step out.

We've made it a little bit easier to get access to our mounting holes.It's a good idea to have something underneath the step to support it. I'm using a floor jack to help me get the new step in place. It takes a little bit of patience to get everything lined up because it is rather hard to see but once we get the holes lined up, we can put our hardware in hand tight so that step will support itself and we can come back and tighten it all down.Typically you're going to have four bolts, one on each corner holding your step in place. There may be more but you just want to make sure that you replace them all and get them all nice and tight. Now these are the wires that we cut and as you can see they have some inaudible 00:03:15 connectors on them.

That's because it was hardwired into the motor. Now we're going to use the other end of the pigtail and then just connect our wires here so we can have a quick disconnect and if any issues arise we can disconnect it. It would be a little bit easier rather than cutting and splicing every time.So we'll go ahead and cut back these butt connectors and strip the wires and start attaching everything color for color. We're going to take a heat shrink butt connector and now these don't come with our kit but if you need some you can pick some up on our website. Then we can take the other end of our pigtail and we'll find the brown wire. It's already prestrippe.d So we can just put it into the other end of our butt connector and crimp it in place. Now we're going to do that for each one of our wires and we're going to connect them color for color. You should have a white, a yellow, and a red left on the motor home end as well as the pigtail end.We'll be using a heat gun to shrink down the connectors. I just want to mention if you are using an open flame you want to be extra careful not to burn the wires or the connectors themselves. Now this is where our ground from our previous step was installed. I'm going to go ahead and remove that bolt, take our new ground wire, slide the bolt and washer around it, and line up the hole and reinstall that bolt. With the jack out of the way, we can go ahead and shut our door. We can go ahead and go back underneath and start cleaning up all those wires.That'll finish up your look of the lifter components quickie 36 series single electric step.


Customer Reviews

Replacement Step, Motor, and Switch for Kwikee RV Electric Steps - 36 Series - 30" Wide - LC3756272

Average Customer Rating:  4.9 out of 5 stars   (26 Customer Reviews)

Replaces the electric step, motor, and switch kit for your Kwikee 28 series RV steps. Motor extends and retracts the step when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.

by:

Easy to install and has worked great ever since.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


The step was exactly what I needed. And the installation was easy. The only thing I would include would be both limit switched.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


Overall looked good after delivery. Used jack to help put up against frame to bolt on. The plug connection was short so was glad included with shipment was an extra extension wire with plug. Had to also replace magnet switch at door since without doing so the step closed when the RV door was opened and extended when the RV door was closed just the opposite ofd what it needed to be. The original magnet switch was not suited for this new unit. Called the manufacturer and they told me the included magnetic switch needed to be replaced for proper operation. Sure enough once I put the new magnetic switch in everything works perfect.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


This step is a big upgrade from the original steps. Much better mechanism and smoother operating than the original.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


The new step came the day before it was expected! It bolted up to the existing support structure and plugged in to the existing wiring...with the exception of the door (magnetic) switch. That was easy to replace as the existing wires had a connection behind the door frame. Two new crimps for that, then bolt up the new step and plug and play! Probably 2 hrs start to finish. But I was being careful.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


As usual etrailer exceeded my expectations. The step arrived much sooner than expected. Very sturdy step and an exact replacement for our damaged one so it should go right in.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


I ordered this step to replace a 21 year old step on our 2001 Monaco Windsor as I was having problems with it. I received the replacement on time and installed it in 30 minutes, It was a direct plug and play. Also the same quality as the old one. hopefully get another 20 years from it. All my experiences in the past with E-trailer has been positive.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


I hit a curb and damaged the RV step, I called etrailer and gave Pat my info and she put me on hold while she checked with Manufature for correct part #. She emailed me with timely progress of my order. Upon receiving my order I removed the damaged one and installed the replacement. It was correct replacement and only took I hour to complete and is working great. Thank you




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


These guys and gals know their products and deliver as promised. I have been buying from them for about three years now and I am very satisfied with the customer service I receive.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


Everything is exactly what it should be thank you for your excellent service I got the package the following day which is even earlier than you originally mentioned great thank you




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


Product fitted our needs and was here q uick.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


I have ordered dozens of items from Etrailer. They ALWAYS get it right. In spite of disappearing vendors, changes in versions, or totally new replacements; they are perfect in deciphering the correct part. Kudos to them!!!




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


The Kwikee step was a direct replacement for a damaged step and was a perfect fit. ETRAILER kept me informed of delays and offered suitable replacements. I chose to wait on my original order and still received it in a very timely manner. I have been very pleased all products I have purchased from ETRAILER.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


Replacement for a step that got in the way of a big rock. Once supports got bent back in shape, installation was straightforward. Electrical was a little different than factory setup, but step has additional function now. Works great.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


Excellent product recommendation by etrailer. Excellent installation.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


installed on 1999 Monaco Dynasty did have to drill mounting holes just a little to lineup.Works great, No problems at all. Finish seems to be holding up well. would highly recommend.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


Love the step, it bolted and wired right up. Had it operating in less than an hour.


Comments
Working great!!
Phillip C - 12/18/2020


by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


We really like it!




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps


Couldn't be more happy with the product.




by:

Review from a similar Kwikee 36 Series in RV and Camper Steps





by:

Review from a similar Kwikee 36 Series in RV and Camper Steps





by:

Review from a similar Kwikee 36 Series in RV and Camper Steps





by:

Review from a similar Kwikee 36 Series in RV and Camper Steps





by:

Review from a similar Kwikee 36 Series in RV and Camper Steps





by:

Review from a similar Kwikee 36 Series in RV and Camper Steps




25
26
Show More Reviews

See what our Experts say about this Kwikee RV and Camper Steps




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Updated by:
Kathleen M
Employee Brian T
Updated by:
Brian T
Employee Halie H
Updated by:
Halie H
Employee Cody B
Updated by:
Cody B
Employee Dustin K
Video Edited:
Dustin K
Employee Chelsea B
Written by:
Chelsea B
Employee Robert C
Installed by:
Robert C
Employee Michael B
Installed by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.