bing tracking image
  1. RV and Camper Steps
  2. Kwikee
  3. Motorhome
  4. Electric Step
  5. 2 Steps
  6. 25 Inch Wide Step
Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 42 Series - 25-1/4" Wide

Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 42 Series - 25-1/4" Wide

Item # LC372779
Retail:$2,436.95
Our Price: $1,978.08
You Save: $458.87
RV and Camper Steps
Shipping Weight: 116 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replaces the electric steps, motor, and control unit for your Kwikee 42 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. Wiring pigtail hardwires to your RV's power. Great Prices for the best rv and camper steps from Kwikee. Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 42 Series - 25-1/4" Wide part number LC372779 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Photos

Kwikee RV and Camper Steps - LC372779

  • Motorhome
  • Electric Step
  • 2 Steps
  • 25 Inch Wide Step
  • Kwikee
  • 30-1/4 Inch Wide
  • Steel
  • 6 Inch Drop/Rise
  • No Ground Contact

Replaces the electric steps, motor, and control unit for your Kwikee 42 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. Wiring pigtail hardwires to your RV's power.


Features:

  • Replaces the steps, motor, and control unit for your Kwikee 42 series steps
    • Switch kit (LC369311) for extension override sold separately
  • Motor works with gearbox to extend and retract the steps
  • Control unit wires steps to the opening and closing of the RV door
  • Integrated safety features help prevent damage to the steps
    • Motor retracts the steps if they strike an obstacle during extension
    • Ignition override retracts the steps when the vehicle's engine is started
  • Non-slip tread and easy-to-see reflective strips on step surface
  • Sturdy, powder coated steel construction with weatherproof wiring withstands the elements
    • Solid steel drive rods and stainless steel bushings provide additional durability
    • Air pressed rivets at pivot points ensure long-term strength
  • Simple installation with existing mounting holes and wiring harness
    • Hardware sold separately
  • Made in the USA


Specs:

  • Extended height: 9-1/4"
    • Folded height: 9-1/4"
  • Overall width: 30-1/4"
  • Mounting plate dimensions: 30-1/4" wide x 24-11/16" deep
  • Bolt pattern: 29" wide x 18" deep
  • Step dimensions: 25-1/4" wide x 9-1/2" deep
  • Drop/Rise: 6"
  • Voltage:
    • Motor: 12V
  • Control unit amperage: 10A
  • Control unit wire gauge:
    • Green: 12 AWG
    • Purple: 16 AWG
  • Weight capacity: 300 lbs
  • 1-Year warranty


Note: This step assembly includes the steps, motor, and control unit only. The steps will operate automatically, extending when the RV door opens and retracting when the door closes.


If you want the complete step assembly that also allows you to override the automatic retraction so the steps stay out whether the door is open or closed, you will need a switch kit (sold separately).


The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should having this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.


Safety Features

The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.


Will Kwikee Electric Steps Work for You?

Electric steps are typically installed on RVs and some travel trailers. The electric steps from Kwikee install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.


Kwikee In and Out

The Kwikee electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 30-1/4" wide and 24-11/16" deep.


If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 24-3/4" wide to 37-1/4" wide. A full list of the available steps is below.


Outriggers for RV Steps

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.


Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.


How Many Steps Do You Need?

Kwikee Entry Height

To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.


The chart below displays mounting bracket widths in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.


This page's step assembly is in bold text.


Mounting Bracket WidthEntry HeightPart Number (Complete Assembly)Part Number (Replacement Assembly)
24-3/4"15-5/8" - 17-5/8"LC3747453LC3747452*, LC3747451**
25"16-3/4" - 18-3/4"LC3724742n/a
25-1/2"27-7/8" - 29-7/8"LC3658373LC369552*, LC365837*
25-1/2"20-1/8" - 22-1/8"LC372261LC3722615*, LC3722617**, LC3722616***
25-1/2"20-1/2" - 22-1/2"n/aLC3725791*
25-1/2"12-1/8" - 14-1/8"LC3723383LC372338**
25-1/4"13" - 15"LC3711363LC371136*, LC3711361**
25-3/4"22-7/8" - 24-7/8"n/aLC372558*
25-5/8"11-7/8" - 13-7/8"LC3691461LC369146*, LC3691462**
25-5/8"13" - 15"n/aLC3726041*
25-7/8"23-1/4" - 25-1/4"LC3726892LC3726891**
26-5/16"27-1/4" - 29-1/4"LC3694042n/a
29-3/8"18" - 20"LC3722661LC372266*, LC3722662**
30-1/4"15-1/4" - 17-1/4"n/aLC372779*
30-3/8"17-1/4" - 19-1/4"n/aLC427247*
30-5/8"20-1/2" - 22-1/2"n/aLC375632*
31-1/2"28-5/8" - 30-5/8"n/aLC375821*
31-1/2"12-3/8" - 14-3/8"LC3756271LC3756272**
32-3/8"20-1/4" - 22-1/4"LC3722862LC3722863**
37-1/4"18" - 20"n/aLC3694112*, LC369411***

*Motor and control unit

**Motor and switch kit

***Motor only



How Do You Install the Steps?

To install the steps:

  1. Hook up the steps to power to verify that all components are in working order
  2. Make sure the camper is level on flat ground
  3. Lift the steps into the mounting space and prop into place
  4. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  5. If needed, install the outriggers
  6. Align step mounting holes and secure in place with carriage bots and flange lock nuts

    -Make sure bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  7. Tighten hardware until snug
  8. Make sure assembly is sitting square and level
  9. Torque the hardware tight
  10. Connect the appropriate writing to your vehicle's source


372779 Lippert Components (LCI) Quickie 42 Series Motorized Motorhome Entry Steps - 2 Stairs - 6" Drop/Rise - 25-1/4" Wide - 300 lbs





Customer Satisfaction Score:


Customer Reviews

Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - 42 Series - 25-1/4" Wide - LC372779

Average Customer Rating:  4.3 out of 5 stars   (6 Customer Reviews)

Replaces the electric steps, motor, and control unit for your Kwikee 42 series RV steps. Motor and control unit automatically extend and retract the steps when you open and close your door. Wiring pigtail hardwires to your RV's power.

by:

Very glad they had this step and installation went well.



by:

Was a perfect fit for my 2005 Holiday Rambler Navigator. Listing says 25 1/4” width but it’s really 26 1/4” which is the correct size for Monaco built RV’s. Stainless trim from original steps needs to be transferred. Also I needed to trim some fibreglass panel on the lower fender to free the old steps.



by:

This step was a perfect replacment/upgrade for my coach. The only issue I had is it got damaged during shipment and emailed had to send out another unit. This item should be shipped on a pallet to avoid damage both saving me time and etrailer money. I would order again if the need arose.



by:

As advertised, works well! Thanks



by:



by:


6
6

See what our Experts say about this Kwikee RV and Camper Steps

  • Kwikee Steps Not Operating After Replacing Trailer Battery
    It sounds like the Kwikee Step part # LC372779 is not getting 12V power from auxiliary battery. The first thing to check is the battery disconnect switch box that is between the positive side of the battery and the 30 amp fuse. If that box is switched to "off" the step will not operate. If the switch is on, I recommend to check the ground wires to the battery to make sure they have a secure connection. The battery should have a secure ground to the chassis. I have attached a diagram of...
    view full answer...
    Image 1 for
  • Replacement Steps 42 Series
    The # LC372779 is a direct replacement for LC369311 and any 42 series steps. Step dimensions are 25-1/4" wide x 9-1/2" deep with a Drop/Rise of 6", please note the product review video that is linked. The 24 series has a 30 inch wide step and the 34 series has a 30 inch wide step. Please see the links to these options.
    view full answer...
  • Replacement Steps for 2007 Monaco Dynasty RV
    From the picture you provided it appears you have the Lippert Kwikee 42 Series Double Tread Electric Step # LC372779. Unfortunately, we don't have replacement parts for the steps. Before purchasing make sure the mounting bolt pattern matches. These are 18 by 29 inches.
    view full answer...
    Image 1 for
  • RV Step Recommendation with 6 inches of Rise Between Steps
    It's hard to find RV steps with 6 inches or less of rise between steps, but we do have Lippert Components Kwikee 42 Series Double Tread Electric Step # LC372779 has a 6 inch rise/drop. This is the only 2 step option with that rise/drop that is electric.
    view full answer...
  • Replacement Kwikee RV Electric Steps for Country Coach
    The 42 Series Replacement Steps, Motor, and Control for Kwikee RV Electric Steps, # LC372779 has a bolt pattern of 29" wide x 18" deep. If your current steps are a series 42 they will have the same bolt pattern, please verify. Mounting plate dimensions are 30-1/4" wide x 24-11/16" deep Bolt pattern is 29" wide x 18" deep Step dimensions are 25-1/4" wide x 9-1/2" deep Please note the linked product review video showing these points of measurement. Our return policy is attached for...
    view full answer...
  • Does Lippert Kwikee 42 Series Electric Step # LC372779 Replace Kwikee 42 Step on Motorhome
    If you currently have a Kwikee 42 Series electric step on your 1999 Country Coach Motorhome yes, the Lippert Kwikee 42 Series Electric Step # LC372779 that you referenced will bolt right up as a replacement using the same mounting attachments.
    view full answer...
  • Troubleshooting RV Door Steps that Extend and Retract Backwards
    It sounds like you have a couple wires run backwards on your Lippert powered steps. Its hard to say exactly which wires are wrong but most likely a power wire and ground is backwards. The best recommendation I can give would be for you to go over the wiring and verify everything is connected correctly. The green wire gets grounded to the chassis. The white wire gets connected to the power switch which then goes to the positive battery post. The yellow wire gets run to the a keyed power...
    view full answer...
    Image 1 for
  • Where Do I Need to Measure for Replacement Steps on My 2007 Western Alpine
    Sorry to be the bearer of bad news Jeffrey, but really the only way I am going to be able to get you situated is for you to measure. It hopefully won't be too bad for you since it's only a couple of quick measurements. You're first going to need to measure the width and depth of the space beneath your doorway, as well as the distance from mounting point to the ground. With these measurements I'll be bale to find you a set of steps more suitable for you.
    view full answer...
    Image 1 for
  • Replacement Lippert Kwikee Step Series 42 Double Tread Electric Step for 2006 Beaver Thunder
    The Lippert Components Kwikee 42 Series Double Tread Electric Step # LC372779 is the entire assembly including motor, wiring, and controller. I confirmed this with my contact at Lippert to make sure you wouldn't be missing anything. If you have all the components and just need the motor table, then you will want # LC372749. If you need anything else let me know.
    view full answer...
  • Replacement Steps for 2009 Monaco Dynasty Cheshire IV
    In order to find the best replacement steps for your 2009 Monaco Dynasty Cheshire IV you will need to measure the space you have for the brackets along with the entry height. The 42 series # LC372779 have a 30-1/4" mounting bracket width and fit a 15-1/4" - 17-1/4" entry height. If that matches up with what you have then these steps will be a great replacement. If you want an override switch it is available separately # LC369311. I have attached some images below showing where you need...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Picking Out Powered Double Step for 2013 Tiffin Motorhome
    I found some pictures online of the steps your Tiffin 2013 Red came with and they appear to be a standard double pull out style step. If you wanted an electric version the Kwikee 47 Series Electric RV Steps # LC427247 would be a really great choice. These were designed to replace standard like what you have so at worst there might be some fabrication. This has a bolt pattern of 29" x 22" whereas the # LC372779 is 29" x 18. You should compare the measurements to what your RV has to determine...
    view full answer...
  • Replacement for 181174 Coach Step on 2014 Tiffin Allegro Breeze
    If you can let me know what parts you need to replace I can look into it, otherwise the only solution I know that will take care of your problem is to replace the entire step assembly with part # LC3756271 which is a Kwikee 36 Series single step.
    view full answer...
  • Replacement Steps for Kwikee 42 Series
    I may have a solution for you depending on which series of steps you have but I am sorry they do not just offer a lower step for the Kwikee's. The part number you sent me is for the control model item # LC379604 and it only works in 37 and 42 series steps. If you have the 42 series you can replace it with the Replacement Steps item # LC372779. This is the only replacement option for steps we have for the 42 series. We do not have a replacement for the 37 series.
    view full answer...
  • 2016 Tiffin Allegro Bus 37AP Electric Step Replacement Solution 427247
    We have the Lippert part number they said you'd need with the part # LC427247 which would be your best option to get everything fixed on your setup as simply as possible. We do not have just the plate and rocker arm like you asked about.
    view full answer...
  • Needing a Replacement Electric Coach Double Step for RV LCI Model 168367
    My contact at Lippert confirmed with me that the replacement step for LCI model 168367 will be the Lippert Kwikee 27 Series Electric Step, # LC375632. The Lippert Kwikee step features an automatic shut-down is step interacts with an obstacle. The step is made of heavy-gauge steel and sealed wiring connectors will help keep the weather elements out to provided for longer use life.
    view full answer...
  • Replacement Motor for 42 Series Kwikee Electric Step
    The correct replacement motor for your 42 Series Kwikee Electric Step is the Lippert Components Kwikee Step Motor part # LC369506. The 25 Series and 42 Series use the same motor which is why this particular motor is listed for a 25 Series but it will work on your 42 Series as well.
    view full answer...
  • Parts Needed to Replace RV Steps with Kwikee Series 42 Steps
    To go to a Kwikee Series 42 style step you would need the part # LC372779 which comes with everything but the switch kit which we offer separately with the part # LC369311. There isn't any adapter type solution based on what you have now that would be simpler
    view full answer...
  • RV Steps That Are 24 Wide With 5 Or 6 Drop
    Finding RV steps with a 6" of drop, or less, is difficult. Our only option that has step that is 24" wide, is the Kwikee Electric RV Step Complete Assembly - Single - 35 Series - 24" Wide, part # LC3691461. This step has a 5" drop, but it is just one step. There is another option with a 6" drop with step that is 25-1/4" in width, par # LC372779. These are our only options.
    view full answer...
  • Replacement Parts for Coach Step Model 168367
    I do have an option for you but we currently do not carry the correct replacement for your Coach Step Model 168367. Instead, I recommend repairing the steps you have now as this will be much more cost effective and won't require any drilling. For this you can use the Replacement Motor part # LC301695 and or the Replacement Control Module part # LC301702.
    view full answer...
  • Replacement Parts for Electric Coach Step Model 168367 on Tiffin Motorhome
    We currently do not carry the correct replacement for your Coach Step Model 168367. Instead, I recommend repairing the steps you have now as this will be much more cost effective and won't require any drilling. For this you can use the Replacement Motor part # LC301695 and or the Replacement Control Module part # LC301702.
    view full answer...
  • Can Lippert SolidStep Be Used on a Class A Motorhome
    That's exactly why you need to use electric steps like what we see with the Kwikee Series 42 # LC372779 steps. Class A motorhomes just have that one entrance which would make it too difficult to utilize a pull down step like the Lippert SolidStep # LC791574. I you're needing to replace your electric steps then the 42 Series I mentioned above are a good fit if the entry height is 15-1/4" - 17-1/4" and the 29" wide x 18" deep bolt pattern matches. These are designed to open and close when...
    view full answer...
  • How to Determine the Correct Steps for a 2008 Monaco Executive Motorhome
    There is no database or anything that tells us what steps are correct for a motorhome/RV by year/make/model. You would need to know your entry height and mounting bracket width. From what I could find, your 2008 Monaco Executive Motorhome likely has a 23-3/4" wide mounting bracket. Options like the Kwikee Electric RV Step Complete Assembly # LC372261 (20" - 23" entry height) and Kwikee Electric RV Step Complete Assembly # LC3658373 (28" - 31" entry height) are likely to work if that is...
    view full answer...
  • Replacement Steps for SCS/Frigette 733-0074 On RV
    I would be more than happy to help you find replacement steps for the Scs/Frigette 733-0074 steps on your 2008 Monaco Dynasty Renaissance IV! We don't have any exact conversions but we do have replacement 2-step steps that you can potentially use. You'll just want to choose the steps that fit your application best. The 42 Series Kwikee Step # LC372779 is 25-1/4" wide and has a mounting plate that is 30-1/4" wide x 24-11/16" deep. The 47 Series Kwikee Step # LC427247 is 26-1/4" wide and...
    view full answer...
    Image 1 for
  • Replacement Slides and Table for Kwikee Series 42 Steps
    Sounds like you are looking for the replacement table for your Kwikee Series 42 steps which would be part # LC372749 as well as the slides # LC369690 and you'd be set.
    view full answer...


< Previous
12



Do you have a question about this RV and Camper Step?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Halie H
Updated by:
Halie H
Employee Cody B
Updated by:
Cody B
Employee Chelsea B
Written by:
Chelsea B
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.