1. RV and Camper Steps
  2. Kwikee
  3. 1 Step
  4. Electric Step
  5. Motorhome
  6. 24 Inch Wide
Kwikee 26 Series Electric RV Step - Single - 5" Rise - 20-1/2" x 7-1/2" Bolt Pattern

Kwikee 26 Series Electric RV Step - Single - 5" Rise - 20-1/2" x 7-1/2" Bolt Pattern

Item # LC3711361
lowest price pledge
Our Price: $392.69
You Save: $152.26
RV and Camper Steps
This item qualifies for Free Shipping
Shipping Weight: 35 lbs
In Stock, Ships Today
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Powered RV entry step with 24-3/8" mounting plate opens and closes when you activate the switch. Motor extends and retracts step when it receives the signal from the switch kit. Switch kit mounts inside your RV and wires to step. Lowest Prices for the best rv and camper steps from Kwikee. Kwikee 26 Series Electric RV Step - Single - 5" Rise - 20-1/2" x 7-1/2" Bolt Pattern part number LC3711361 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (4)
  • Q & A (9)
  • Videos (1)
  • Photos
  • Why etrailer?

Kwikee RV and Camper Steps - LC3711361

  • 1 Step
  • Electric Step
  • Kwikee
  • Motorhome
  • 24 Inch Wide
  • 5 Inch Drop/Rise
  • Steel
  • No Ground Contact
  • 300 lbs

Powered RV entry step with 24-3/8" mounting plate opens and closes when you activate the switch. Motor extends and retracts step when it receives the signal from the switch kit. Switch kit mounts inside your RV and wires to step.


  • Electric RV steps extend and retract when you activate the switch kit
    • Motor and switch kit included
  • Integrated motor automatically retracts steps if they strikes an obstacle during extension
    • Features a fully-sealed gearbox with brass ball bearings and linkage
  • Switch kit allows you to extend and retract steps manually
    • Rocker power switch mounts inside your RV for easy access
  • Amber incandescent light illuminates steps to make them easy to see at night
  • Non-slip tread on step surface ensures solid footing
    • Reflective strips provide additional visibility
  • Sturdy, powder coated steel construction with weatherproof wiring withstands the elements
    • Solid steel drive rods and stainless steel bushings provide additional durability
    • Air pressed rivets at pivot points ensure long-term strength
  • Simple installation with existing mounting holes and wiring harness
    • Hardware sold separately
  • Made in the USA


  • Entry height: 6-3/8"
    • Height when folded: 6-7/8"
  • Mounting plate dimensions: 24-3/8" wide x 10" deep
  • Bolt pattern: 20-1/2" wide x 7-1/2" deep
  • Step dimensions: 23-1/2" wide x 10" deep
  • Drop/Rise: 5"
  • Voltage:
    • Motor: 12V
    • Switch kit: 250V
  • Weight capacity: 300 lbs
  • 1-Year warranty

Kwikee 3711361 Short Term

Kwikee electric RV entry steps provide an effortless, convenient way to enter and exit your RV. The steps are wired to your RV's door and feature an automatic extension, unfolding when the door opens and retracting when it closes. This differentiates the steps from the alternate manual pull-out steps.

Motor, Gearbox, Linkage, and Switch Kit

The updated Kwikee steps manufactured since 1999 require the integrated motor, gearbox, and linkage (IMGL) setup to power the steps. The motor provides the power, the gearbox turns the linkage arm, and the linkage pushes the steps out and pulls them back in when rotated by the gearbox.

The switch kit mounts inside your RV and wires to the steps. When you push and hold the rocker switch, it signals the motor to extend or retract the steps until you release the switch.

The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should having this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.

Safety Features

The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.

For added safety, the steps have a non-skid, textured coating. This textured surface provides traction and ensures that you have secure footing even when the steps are wet.


Installing the steps on your RV is simple. Pre-drilled holes in the step's mounting plate match up to holes in your RV's frame for an easy, bolt-on installation. You will need (4) 3/8" x 1" carriage bolts and 4 flange nuts, available in Lippert's mounting hardware kit (LC118155-72 - sold separately) to bolt the steps into place. Use 2 carriage bolts and 2 locknuts on each side to attach the mounting brackets to your RV's frame. If additional brackets are needed to mount the steps to the RV frame, and none are already installed, outriggers (LC301704 - sold separately) may be needed for installation depending on the model of your original stairs.

3711361 Lippert Components (LCI) Quickie 26 Series Motorized Motorhome Entry Step - One Stair - 5" Drop/Rise - 23-1/2" Wide - 300 lbs

Kwikee Part Number 902600906

Video of Kwikee 26 Series Electric RV Step - Single - 5" Rise - 20-1/2" x 7-1/2" Bolt Pattern

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Lippert Components Kwikee Single Electric Step Review

Speaker 1: Today you're going to be taking a look at the lifter components quickie 36 series single electric step. Stepping up into your RV can be a bit of a challenge. Especially if the steps aren't working. That's where our replacement steps are going to come into play. With our step installed, when we open the door it's going to automatically come out allowing us to step in easier getting in our RV but at the same time when we close the door, they're going to automatically retract making sure they're not going to catch on anything when we're driving down the road.Now from the top where it's mounted behind this panel, our step is going to drop down a total of five inches. In our application and the step we're using is going to be 24 inches wide by 10 and three quarter inches deep.

There is another step that is available that's going to be 30 inches. To see our website for your specific application and it's going to be made of a nice solid steel construction and have a nice black powdered finish for long lasting durability.The hidden amber light underneath our step is going to make it a lot easier for us to find that step in low light situations and have confidence when we're getting in or out of our RV. The included motor on our step is going to have a solid steel drive rod as well as stainless steel bushes for extended life of the motor. Our steps come with a door switch allowing it to know when to open up and when to close.Now our step is also going to come with a rocker switch in case you choose to manually turn it on and off and not use that door switch. Now that we've seen our steps and gone over some of the features, we do realize that every RV is going to be slightly different but we'll go ahead and give you a brief overview of how to get them in place.To begin our installation, you're going to need to remove your steps and disconnect al the electrical components that are on the steps themselves.

So I got our new step here and we're going to have our pigtail that we're going to wire into our motor home. Then the pigtail is coming off the step as well as the ground wire.So to get our step extended to make it a little easier to work with, I'm going to go ahead and plug in our pigtail and then I have a jump box here which is going to provide my power and grout. So I'm going to take the green wire with the ring terminal on it. I'm going to hook it to ground. I'm going to take my red wire, hook it to power, and then now we're going to take our jump box and turn it on and that should extend the step out.

We've made it a little bit easier to get access to our mounting holes.It's a good idea to have something underneath the step to support it. I'm using a floor jack to help me get the new step in place. It takes a little bit of patience to get everything lined up because it is rather hard to see but once we get the holes lined up, we can put our hardware in hand tight so that step will support itself and we can come back and tighten it all down.Typically you're going to have four bolts, one on each corner holding your step in place. There may be more but you just want to make sure that you replace them all and get them all nice and tight. Now these are the wires that we cut and as you can see they have some inaudible 00:03:15 connectors on them.

That's because it was hardwired into the motor. Now we're going to use the other end of the pigtail and then just connect our wires here so we can have a quick disconnect and if any issues arise we can disconnect it. It would be a little bit easier rather than cutting and splicing every time.So we'll go ahead and cut back these butt connectors and strip the wires and start attaching everything color for color. We're going to take a heat shrink butt connector and now these don't come with our kit but if you need some you can pick some up on our website. Then we can take the other end of our pigtail and we'll find the brown wire. It's already prestrippe.d So we can just put it into the other end of our butt connector and crimp it in place. Now we're going to do that for each one of our wires and we're going to connect them color for color. You should have a white, a yellow, and a red left on the motor home end as well as the pigtail end.We'll be using a heat gun to shrink down the connectors. I just want to mention if you are using an open flame you want to be extra careful not to burn the wires or the connectors themselves. Now this is where our ground from our previous step was installed. I'm going to go ahead and remove that bolt, take our new ground wire, slide the bolt and washer around it, and line up the hole and reinstall that bolt. With the jack out of the way, we can go ahead and shut our door. We can go ahead and go back underneath and start cleaning up all those wires.That'll finish up your look of the lifter components quickie 36 series single electric step.

Customer Reviews

Kwikee 26 Series Electric RV Step - Single - 5" Rise - 20-1/2" x 7-1/2" Bolt Pattern - LC3711361

Average Customer Rating:  5.0 out of 5 stars   (4 Customer Reviews)

Powered RV entry step with 24-3/8" mounting plate opens and closes when you activate the switch. Motor extends and retracts step when it receives the signal from the switch kit. Switch kit mounts inside your RV and wires to step.

- LC3711361

This step is used in a very unconventional way. This application may not be what you are looking for in promoting the product. This is replacing the identical step on my 4Runner.My wife has mobility issues and can not raise her foot to the height of the factory running boards. Installing your step allowed me to retain my 2016, 4Runner. Received the step this afternoon and is installed and working well tonight. 736736

- LC3711361

Great Step! Bolt pattern fit exactly with the one I was replacing so it took some no time to get everything bolted up. Electrical connection worked great and step operated as expected. 734453

- LC3711361

Perfect fit. After 1 year works just like new. Very satisfied. 579790

- LC3711361

Best price on the internet. I was initially concerned delivery would not be as quick as it would if I payed more at another online retailer, but WOW, was I wrong. Got it in 2 days! etrailer is my "go to" from now on. 515547


Ask the Experts about this Kwikee RV and Camper Steps

  • Replacement Parts for Kwikee Series 26 Steps
    We have several replacement parts for the Kwikee 26 Series steps depending on what you need. We have some different switch kits, # LC371010 and # LC369311, so if you believe the switch is the problem select the one that matches what you have. We also have Link Assembly C and 9510CU # LC379801 which is pretty much all of the electrical and mechanical components that operate the steps.
    view full answer...
  • Replacement Gear and Parts for Original Lippert 3 Step on 2008 Forest River Georgetown 373
    For the replacement gear you will use the Replacement Entry Step Gear for Lippert Kwikee 25 and 26 Series Triple Steps # LC369354. I believe the shear pin you are referring to is a part of the gear itself. The motor is # LC369506 which comes with the smaller gear. If you want to replace the entire assembly you can use the Lippert Components Kwikee Step Replacement Kit # LC379804.
    view full answer...
  • Replacement Kwikee Step Series 26 Motor and Gearbox for 1995 Flair RV
    We have the Lippert Components Kwikee Step Gear/Linkage with C for 26 Series Kwikee Steps # LC379162. Then you will need the motor # LC379608. We also have the complete repair kit for your Kwikee Series 26 steps if you prefer updating the components all at once. The Lippert Components Kwikee Step Replacement Kit Link Assembly C and 9510CU # LC379801 contains an integrated motor, gear box, linkage kit C, and control unit. Basically the repair kit replaces everything except the frame.
    view full answer...
  • Does Kwikee 26 Series Step # LC3711361 Automatically Retract when Ignition is Turned On
    The Kwikee 26 Series step # LC3711361 retracts when the door is closed but if you have the door open and turn the key on it will not retract. The extend and retract function is controlled by sensors on the door.
    view full answer...
  • Recommended Kwikee Step for Ford E-350 Van
    There are not steps specifically made for Ford E-350 Vans, however there are many of the class III motorhomes that use the Kwikee steps as they are built out. To add steps to your E-350 van, I recommend the Lippert Components Kwikee 26 Series Single Electric Step # LC3711361. According to my contact at Lippert the upper panel can have other mounting holes added if needed to fit your frame. This kit includes the switch kit and motor. I've attached a video to assist.
    view full answer...
  • What Comes with the Lippert Kwikee 26 Series Electric Step # LC3711361
    The only things included with the Lippert Kwikee 26 Series Electric Step # LC3711361 are the step, the motor, the switch, and the adapter harness. This is the most bare kit that we carry as the other 26 series steps come with the control module as well. It actually wouldn't be a bad thing to have an extra switch and adapter harness in case something were to need replacing anyways.
    view full answer...
  • Kwikee Step Solution for 1995 Jayco Designer Series Model 2930LB to Replace Missing Set
    The closest Kwikee single step mounting dimensions we have is the part # LC3711361 which has the mounting holes separated from left to right at 20-1/2 inches like you have and front to back 7-1/2 inches. Looking at the bottom of the mounting plate on this step you could easily drill new holes to match the size you need.
    view full answer...
  • Comparing the Kwikee Single Step 26 Series vs. 28 Series
    Without knowing the width of your step, all I can do is give you some options to compare. We have the Lippert Components Kwikee Step Frame 28 SERIES SINGLE STEP # LC3747457 which has a mounting bolt pattern of 6.5 inches x 22 inches and a step tread of 23.75 inches by 10 inches. It has a 7 inch vertical rise. The 26 Series step # LC3711361 has a mounting bolt pattern of 7.5 inches by 20.5 inches. It has a tread that is 23.5 inches by 8.5 inches. It has a 5 inch vertical rise.
    view full answer...
  • Replacement Series 26 Kwikee Electric Single Step
    I do have an option for you but I contacted Kwikee because the motor, gears and linkage are different for each series of steps, it is not possible to replace the series 26 step frame with the series 28 frame part # LC3747457. They do not offer just the frame for this series. I recommend to replace the whole step with part # LC3711361. I have attached a diagram of the bolting hole pattern for your reference.
    view full answer...

Do you have a question about this RV and Camper Step?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Dustin K
Written by:
Chelsea B
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-8924