RV and Camper Steps

/

Kwikee

/

1 Step

/

Electric Step

/

Motorhome

/

24 Inch Wide

Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern

Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern

Item # LC3691462

lowest price pledge

Retail:$830.58

Our Price: $541.95

You Save: $288.63
RV and Camper Steps

This item qualifies for Free Shipping

Shipping Weight: 42 lbs

Arrives before Christmas with Ground or 3 Day Shipping.
Quantity: 
In Stock
Kwikee RV and Camper Steps - LC3691462
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos

Powered RV entry step with 25-1/2" mounting plate opens and closes when you activate the switch. Motor extends and retracts step when it receives the signal from the switch kit. Switch kit mounts inside your RV and wires to step. Lowest Prices for the best rv and camper steps from Kwikee. Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern part number LC3691462 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

Kwikee RV and Camper Steps - LC3691462

  • 1 Step
  • Electric Step
  • Kwikee
  • Motorhome
  • 24 Inch Wide
  • 5 Inch Drop/Rise
  • Steel
  • No Ground Contact
  • 300 lbs

Powered RV entry step with 25-1/2" mounting plate opens and closes when you activate the switch. Motor extends and retracts step when it receives the signal from the switch kit. Switch kit mounts inside your RV and wires to step.


Features:

  • Electric RV steps extend and retract when you activate the switch kit
    • Motor and switch kit included
  • Integrated motor automatically retracts steps if they strikes an obstacle during extension
    • Features a fully-sealed gearbox with brass ball bearings and linkage
  • Switch kit allows you to extend and retract steps manually
    • Rocker power switch mounts inside your RV for easy access
  • Amber incandescent light illuminates steps to make them easy to see at night
  • Non-slip tread on step surface ensures solid footing
    • Reflective strips provide additional visibility
  • Sturdy, powder coated steel construction with weatherproof wiring withstands the elements
    • Solid steel drive rods and stainless steel bushings provide additional durability
    • Air pressed rivets at pivot points ensure long-term strength
  • Simple installation with existing mounting holes and wiring harness
    • Hardware sold separately
  • Made in the USA


Specs:

  • Entry height: 5-7/8"
    • Height when folded: 5-3/4" tall
  • Mounting plate dimensions: 25-1/2" wide x 11-3/8" deep
  • Bolt pattern: 22" wide x 8" deep
  • Step dimensions: 24" wide x 10-3/4" deep
  • Drop/Rise: 5"
  • Voltage: 12V
  • Weight capacity: 300 lbs
  • 1-Year warranty


Kwikee 3691462 July 2019

Lippert 1462 Dims Part 2

Lippert 1462 Dims Part 2 (3)

Kwikee electric RV entry steps provide an effortless, convenient way to enter and exit your RV. The steps are wired to your RV's door and feature an automatic extension, unfolding when the door opens and retracting when it closes. This differentiates the steps from the alternate manual pull-out steps.


Motor, Gearbox, Linkage, and Switch Kit

The updated Kwikee steps manufactured since 1999 require the integrated motor, gearbox, and linkage (IMGL) setup to power the steps. The motor provides the power, the gearbox turns the linkage arm, and the linkage pushes the steps out and pulls them back in when rotated by the gearbox.


The switch kit mounts inside your RV and wires to the steps. When you push and hold the rocker switch, it signals the motor to extend or retract the steps until you release the switch.


The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should having this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.


Safety Features

The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.


For added safety, the steps have a non-skid, textured coating. This textured surface provides traction and ensures that you have secure footing even when the steps are wet.


Installation

Installing the steps on your RV is simple. Pre-drilled holes in the step's mounting plate match up to holes in your RV's frame for an easy, bolt-on installation. You will need (4) 3/8" x 1" carriage bolts and 4 flange nuts, available in Lippert's mounting hardware kit (LC118155-72 - sold separately) to bolt the steps into place. Use 2 carriage bolts and 2 locknuts on each side to attach the mounting brackets to your RV's frame. If additional brackets are needed to mount the steps to the RV frame, and none are already installed, outriggers (LC301704 - sold separately) may be needed for installation depending on the model of your original stairs.



3691462 Lippert Components (LCI) Quickie 35 Series Motorized Motorhome Entry Step - 1 Stair - 5" Drop/Rise - 24" Wide - 300 lbs

Kwikee Part Number 903500906







Video of Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Lippert Components Kwikee Single Electric Step Review

Speaker 1: Today you're going to be taking a look at the lifter components quickie 36 series single electric step. Stepping up into your RV can be a bit of a challenge. Especially if the steps aren't working. That's where our replacement steps are going to come into play. With our step installed, when we open the door it's going to automatically come out allowing us to step in easier getting in our RV but at the same time when we close the door, they're going to automatically retract making sure they're not going to catch on anything when we're driving down the road.Now from the top where it's mounted behind this panel, our step is going to drop down a total of five inches. In our application and the step we're using is going to be 24 inches wide by 10 and three quarter inches deep.

There is another step that is available that's going to be 30 inches. To see our website for your specific application and it's going to be made of a nice solid steel construction and have a nice black powdered finish for long lasting durability.The hidden amber light underneath our step is going to make it a lot easier for us to find that step in low light situations and have confidence when we're getting in or out of our RV. The included motor on our step is going to have a solid steel drive rod as well as stainless steel bushes for extended life of the motor. Our steps come with a door switch allowing it to know when to open up and when to close.Now our step is also going to come with a rocker switch in case you choose to manually turn it on and off and not use that door switch. Now that we've seen our steps and gone over some of the features, we do realize that every RV is going to be slightly different but we'll go ahead and give you a brief overview of how to get them in place.To begin our installation, you're going to need to remove your steps and disconnect al the electrical components that are on the steps themselves.

So I got our new step here and we're going to have our pigtail that we're going to wire into our motor home. Then the pigtail is coming off the step as well as the ground wire.So to get our step extended to make it a little easier to work with, I'm going to go ahead and plug in our pigtail and then I have a jump box here which is going to provide my power and grout. So I'm going to take the green wire with the ring terminal on it. I'm going to hook it to ground. I'm going to take my red wire, hook it to power, and then now we're going to take our jump box and turn it on and that should extend the step out.

We've made it a little bit easier to get access to our mounting holes.It's a good idea to have something underneath the step to support it. I'm using a floor jack to help me get the new step in place. It takes a little bit of patience to get everything lined up because it is rather hard to see but once we get the holes lined up, we can put our hardware in hand tight so that step will support itself and we can come back and tighten it all down.Typically you're going to have four bolts, one on each corner holding your step in place. There may be more but you just want to make sure that you replace them all and get them all nice and tight. Now these are the wires that we cut and as you can see they have some inaudible 00:03:15 connectors on them.

That's because it was hardwired into the motor. Now we're going to use the other end of the pigtail and then just connect our wires here so we can have a quick disconnect and if any issues arise we can disconnect it. It would be a little bit easier rather than cutting and splicing every time.So we'll go ahead and cut back these butt connectors and strip the wires and start attaching everything color for color. We're going to take a heat shrink butt connector and now these don't come with our kit but if you need some you can pick some up on our website. Then we can take the other end of our pigtail and we'll find the brown wire. It's already prestrippe.d So we can just put it into the other end of our butt connector and crimp it in place. Now we're going to do that for each one of our wires and we're going to connect them color for color. You should have a white, a yellow, and a red left on the motor home end as well as the pigtail end.We'll be using a heat gun to shrink down the connectors. I just want to mention if you are using an open flame you want to be extra careful not to burn the wires or the connectors themselves. Now this is where our ground from our previous step was installed. I'm going to go ahead and remove that bolt, take our new ground wire, slide the bolt and washer around it, and line up the hole and reinstall that bolt. With the jack out of the way, we can go ahead and shut our door. We can go ahead and go back underneath and start cleaning up all those wires.That'll finish up your look of the lifter components quickie 36 series single electric step.


Customer Reviews

Kwikee 35 Series Electric RV Step - Single - 5" Rise - 22" x 8" Bolt Pattern - LC3691462

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Powered RV entry step with 25-1/2" mounting plate opens and closes when you activate the switch. Motor extends and retracts step when it receives the signal from the switch kit. Switch kit mounts inside your RV and wires to step.

- LC369146
by:

Review from a similar Kwikee Kwikee 35 Series in RV and Camper Steps


I will be installing your product (step) next week. You service was outstanding, free shipping and next day deliver is seldom found these days. Your sales associate (MOLLY) was outstanding, very polite, helpful and very knowledgeable about the step I needed. In fact, I called looking for information ONLY and her helpfulness/knowledge was the reason I changed my mind and immediately placed my order. 579850


1
1

Ask the Experts about this Kwikee RV and Camper Steps

Do you have a question about this RV and Camper Step?


  • Comparing Lippert 35 Series Electric RV Step Units
  • The four Lippert 35 Series RV electric step items are essentially the same product but they differ in some of the included components. In certain cases the original electronic control unit on the RV unit may still be functional and only the step and motor are needed. Part # LC3691462 includes the step, motor and switch kit. Part # LC369146 includes the step, motor and control unit. Part # LC3756271 includes the step, motor and switch kit. Part # LC3691461 includes the step, motor,...
    view full answer...

  • Replacement Kwikee Step for 2004 Monaco Dynasty
  • The replacement step you need for your 2004 Monaco Dynasty is the Lippert Components Kwikee 35 Series Single Electric Step # LC3691462 based on the number you gave. Let me know if you have any further questions.
    view full answer...


Do you have a question about this RV and Camper Step?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Adam R
Video Edited:
Dustin K
Written by:
Chelsea B
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.